diff options
Diffstat (limited to 'include/configs/lsxl.h')
| -rw-r--r-- | include/configs/lsxl.h | 139 |
1 files changed, 0 insertions, 139 deletions
diff --git a/include/configs/lsxl.h b/include/configs/lsxl.h deleted file mode 100644 index 3ba5548..0000000 --- a/include/configs/lsxl.h +++ /dev/null @@ -1,139 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (c) 2012 Michael Walle - * Michael Walle <michael@walle.cc> - */ - -#ifndef _CONFIG_LSXL_H -#define _CONFIG_LSXL_H - -/* - * Version number information - */ -#if defined(CONFIG_LSCHLV2) -#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lschl.cfg -#define CONFIG_MACH_TYPE 3006 -#define CONFIG_SYS_TCLK 166666667 /* 166 MHz */ -#elif defined(CONFIG_LSXHL) -#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lsxhl.cfg -#define CONFIG_MACH_TYPE 2663 -/* CONFIG_SYS_TCLK is 200000000 by default */ -#else -#error "unknown board" -#endif - -/* - * General configuration options - */ -#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ -#define CONFIG_KW88F6281 /* SOC Name */ - -#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ - -#define CONFIG_KIRKWOOD_GPIO - -/* - * Commands configuration - */ - -/* - * mv-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ -#include "mv-common.h" - -/* loading initramfs images without uimage header */ - -/* - * Environment variables configurations - */ -#ifdef CONFIG_SPI_FLASH -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 8 -#define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K */ -#endif - -#define CONFIG_ENV_SIZE 0x10000 /* 64k */ -#define CONFIG_ENV_OFFSET 0x70000 /* env starts here */ - -/* - * Default environment variables - */ -#define CONFIG_LOADADDR 0x00800000 - -#if defined(CONFIG_LSXHL) -#define CONFIG_FDTFILE "kirkwood-lsxhl.dtb" -#elif defined(CONFIG_LSCHLV2) -#define CONFIG_FDTFILE "kirkwood-lschlv2.dtb" -#else -#error "Unsupported board" -#endif - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "bootsource=legacy\0" \ - "hdpart=0:1\0" \ - "kernel_addr=0x00800000\0" \ - "ramdisk_addr=0x01000000\0" \ - "fdt_addr=0x00ff0000\0" \ - "bootcmd_legacy=sata init " \ - "&& load sata ${hdpart} ${kernel_addr} /uImage.buffalo "\ - "&& load sata ${hdpart} ${ramdisk_addr} /initrd.buffalo "\ - "&& bootm ${kernel_addr} ${ramdisk_addr}\0" \ - "bootcmd_net=bootp ${kernel_addr} vmlinuz " \ - "&& tftpboot ${ramdisk_addr} initrd.img " \ - "&& setenv ramdisk_len ${filesize} " \ - "&& tftpboot ${fdt_addr} " CONFIG_FDTFILE " " \ - "&& bootz ${kernel_addr} " \ - "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \ - "bootcmd_hdd=sata init " \ - "&& load sata ${hdpart} ${kernel_addr} /vmlinuz " \ - "&& load sata ${hdpart} ${ramdisk_addr} /initrd.img " \ - "&& setenv ramdisk_len ${filesize} " \ - "&& load sata ${hdpart} ${fdt_addr} /dtb " \ - "&& bootz ${kernel_addr} " \ - "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \ - "bootcmd_usb=usb start " \ - "&& load usb 0:1 ${kernel_addr} /vmlinuz " \ - "&& load usb 0:1 ${ramdisk_addr} /initrd.img " \ - "&& setenv ramdisk_len ${filesize} " \ - "&& load usb 0:1 ${fdt_addr} " CONFIG_FDTFILE " " \ - "&& bootz ${kernel_addr} " \ - "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \ - "bootcmd_rescue=run config_nc_dhcp; run nc\0" \ - "eraseenv=sf probe 0 " \ - "&& sf erase " __stringify(CONFIG_ENV_OFFSET) \ - " +" __stringify(CONFIG_ENV_SIZE) "\0" \ - "config_nc_dhcp=setenv autoload_old ${autoload}; " \ - "setenv autoload no " \ - "&& bootp " \ - "&& setenv ncip " \ - "&& setenv autoload ${autoload_old}; " \ - "setenv autoload_old\0" \ - "standard_env=setenv ipaddr; setenv netmask; setenv serverip; " \ - "setenv ncip; setenv gatewayip; setenv ethact; " \ - "setenv bootfile; setenv dnsip; " \ - "setenv bootsource legacy; run ser\0" \ - "restore_env=run standard_env; saveenv; reset\0" \ - "ser=setenv stdin serial; setenv stdout serial; " \ - "setenv stderr serial\0" \ - "nc=setenv stdin nc; setenv stdout nc; setenv stderr nc\0" \ - "stdin=serial\0" \ - "stdout=serial\0" \ - "stderr=serial\0" - -/* - * Ethernet Driver configuration - */ -#ifdef CONFIG_CMD_NET -#define CONFIG_MVGBE_PORTS {0, 1} /* enable port 1 only */ -#define CONFIG_PHY_BASE_ADR 7 -#undef CONFIG_RESET_PHY_R -#endif /* CONFIG_CMD_NET */ - -#ifdef CONFIG_SATA -#define CONFIG_SYS_SATA_MAX_DEVICE 1 -#define CONFIG_SYS_64BIT_LBA -#define CONFIG_LBA48 -#endif - -#endif /* _CONFIG_LSXL_H */ |