1 files changed, 0 insertions, 198 deletions
diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h
deleted file mode 100644
index f1d0def..0000000
--- a/include/configs/microblaze-generic.h
+++ /dev/null
@@ -1,198 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2007-2010 Michal Simek
- *
- * Michal SIMEK <monstr@monstr.eu>
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include "../board/xilinx/microblaze-generic/xparameters.h"
-
-/* MicroBlaze CPU */
-#define	MICROBLAZE_V5		1
-
-#define CONFIG_SYS_BOOTM_LEN	(64 * 1024 * 1024)
-
-/* linear and spi flash memory */
-#ifdef XILINX_FLASH_START
-#define	FLASH
-#undef	SPIFLASH
-#undef	RAMENV	/* hold environment in flash */
-#else
-#undef	FLASH
-#undef	SPIFLASH
-#define	RAMENV	/* hold environment in RAM */
-#endif
-
-/* uart */
-/* The following table includes the supported baudrates */
-# define CONFIG_SYS_BAUDRATE_TABLE \
-	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
-
-/* setting reset address */
-/*#define	CONFIG_SYS_RESET_ADDRESS	CONFIG_SYS_TEXT_BASE*/
-
-#define CONFIG_SYS_MALLOC_LEN	0xC0000
-
-/* Stack location before relocation */
-#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_TEXT_BASE - \
-					 CONFIG_SYS_MALLOC_F_LEN)
-
-/*
- * CFI flash memory layout - Example
- * CONFIG_SYS_FLASH_BASE = 0x2200_0000;
- * CONFIG_SYS_FLASH_SIZE = 0x0080_0000;	  8MB
- *
- * SECT_SIZE = 0x20000;			128kB is one sector
- * CONFIG_ENV_SIZE = SECT_SIZE;		128kB environment store
- *
- * 0x2200_0000	CONFIG_SYS_FLASH_BASE
- *					FREE		256kB
- * 0x2204_0000	CONFIG_ENV_ADDR
- *					ENV_AREA	128kB
- * 0x2206_0000
- *					FREE
- * 0x2280_0000	CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE
- *
- */
-
-#ifdef FLASH
-# define CONFIG_SYS_FLASH_BASE		XILINX_FLASH_START
-# define CONFIG_SYS_FLASH_SIZE		XILINX_FLASH_SIZE
-/* ?empty sector */
-# define CONFIG_SYS_FLASH_EMPTY_INFO	1
-/* max number of memory banks */
-# define CONFIG_SYS_MAX_FLASH_BANKS	1
-/* max number of sectors on one chip */
-# define CONFIG_SYS_MAX_FLASH_SECT	512
-/* hardware flash protection */
-/* use buffered writes (20x faster) */
-# ifdef	RAMENV
-#  define CONFIG_ENV_SIZE	0x1000
-#  define CONFIG_ENV_ADDR	(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
-
-# else	/* FLASH && !RAMENV */
-/* 128K(one sector) for env */
-#  define CONFIG_ENV_SECT_SIZE	0x20000
-#  define CONFIG_ENV_ADDR \
-			(CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE))
-#  define CONFIG_ENV_SIZE	0x20000
-# endif /* FLASH && !RAMBOOT */
-#else /* !FLASH */
-
-#ifdef SPIFLASH
-# ifdef	RAMENV
-#  define CONFIG_ENV_SIZE	0x1000
-#  define CONFIG_ENV_ADDR	(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
-
-# else	/* SPIFLASH && !RAMENV */
-/* 128K(two sectors) for env */
-#  define CONFIG_ENV_SECT_SIZE	0x10000
-#  define CONFIG_ENV_SIZE	(2 * CONFIG_ENV_SECT_SIZE)
-/* Warning: adjust the offset in respect of other flash content and size */
-#  define CONFIG_ENV_OFFSET	(128 * CONFIG_ENV_SECT_SIZE) /* at 8MB */
-# endif /* SPIFLASH && !RAMBOOT */
-#else /* !SPIFLASH */
-
-/* ENV in RAM */
-# define CONFIG_ENV_SIZE	0x1000
-# define CONFIG_ENV_ADDR	(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
-#endif /* !SPIFLASH */
-#endif /* !FLASH */
-
-#define XILINX_USE_ICACHE 1
-#define XILINX_USE_DCACHE 1
-
-#if defined(XILINX_USE_ICACHE)
-# define CONFIG_ICACHE
-#else
-# undef CONFIG_ICACHE
-#endif
-
-#if defined(XILINX_USE_DCACHE)
-# define CONFIG_DCACHE
-#else
-# undef CONFIG_DCACHE
-#endif
-
-#ifndef XILINX_DCACHE_BYTE_SIZE
-#define XILINX_DCACHE_BYTE_SIZE	32768
-#endif
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-#if defined(CONFIG_MTD_PARTITIONS)
-/* MTD partitions */
-
-/* default mtd partition table */
-#endif
-
-/* size of console buffer */
-#define	CONFIG_SYS_CBSIZE	512
-/* max number of command args */
-#define	CONFIG_SYS_MAXARGS	15
-/* default load address */
-#define	CONFIG_SYS_LOAD_ADDR	0
-
-#define	CONFIG_HOSTNAME		"microblaze-generic"
-#define	CONFIG_BOOTCOMMAND	"base 0;tftp 11000000 image.img;bootm"
-
-/* architecture dependent code */
-#define	CONFIG_SYS_USR_EXCEP	/* user exception */
-
-#ifndef CONFIG_EXTRA_ENV_SETTINGS
-#define	CONFIG_EXTRA_ENV_SETTINGS	"unlock=yes\0" \
-					"nor0=flash-0\0"\
-					"mtdparts=mtdparts=flash-0:"\
-					"256k(u-boot),256k(env),3m(kernel),"\
-					"1m(romfs),1m(cramfs),-(jffs2)\0"\
-					"nc=setenv stdout nc;"\
-					"setenv stdin nc\0" \
-					"serial=setenv stdout serial;"\
-					"setenv stdin serial\0"
-#endif
-
-#if defined(CONFIG_XILINX_AXIEMAC)
-# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN	1
-#endif
-
-/* SPL part */
-
-#ifdef CONFIG_SYS_FLASH_BASE
-# define CONFIG_SYS_UBOOT_BASE		CONFIG_SYS_FLASH_BASE
-#endif
-
-/* for booting directly linux */
-
-#define CONFIG_SYS_FDT_BASE		(CONFIG_SYS_FLASH_BASE + \
-					 0x40000)
-#define CONFIG_SYS_FDT_SIZE		(16 << 10)
-#define CONFIG_SYS_SPL_ARGS_ADDR	(CONFIG_SYS_TEXT_BASE + \
-					 0x1000000)
-
-/* SP location before relocation, must use scratch RAM */
-/* BRAM start */
-#define CONFIG_SYS_INIT_RAM_ADDR	0x0
-/* BRAM size - will be generated */
-#define CONFIG_SYS_INIT_RAM_SIZE	0x100000
-
-# define CONFIG_SPL_STACK_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
-					 CONFIG_SYS_INIT_RAM_SIZE - \
-					 CONFIG_SYS_MALLOC_F_LEN)
-
-/* Just for sure that there is a space for stack */
-#define CONFIG_SPL_STACK_SIZE		0x100
-
-#define CONFIG_SYS_UBOOT_START		CONFIG_SYS_TEXT_BASE
-
-#define CONFIG_SPL_MAX_FOOTPRINT	(CONFIG_SYS_INIT_RAM_SIZE - \
-					 CONFIG_SYS_INIT_RAM_ADDR - \
-					 CONFIG_SYS_MALLOC_F_LEN - \
-					 CONFIG_SPL_STACK_SIZE)
-
-#endif	/* __CONFIG_H */