1 files changed, 0 insertions, 112 deletions
diff --git a/include/configs/mx23evk.h b/include/configs/mx23evk.h
deleted file mode 100644
index da1d53c..0000000
--- a/include/configs/mx23evk.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Freescale i.MX23 EVK board config
- *
- * Copyright (C) 2013 Otavio Salvador <otavio@ossystems.com.br>
- * on behalf of O.S. Systems Software LTDA.
- */
-#ifndef __CONFIGS_MX23EVK_H__
-#define __CONFIGS_MX23EVK_H__
-
-/* System configurations */
-#define CONFIG_MACH_TYPE	MACH_TYPE_MX23EVK
-
-/* U-Boot Commands */
-
-/* Memory configuration */
-#define PHYS_SDRAM_1			0x40000000	/* Base address */
-#define PHYS_SDRAM_1_SIZE		0x08000000	/* Max 128 MB RAM */
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-
-/* Environment */
-#define CONFIG_ENV_OVERWRITE
-
-/* Environment is in MMC */
-#if defined(CONFIG_CMD_MMC) && defined(CONFIG_ENV_IS_IN_MMC)
-#define CONFIG_ENV_OFFSET	(256 * 1024)
-#define CONFIG_ENV_SIZE		(16 * 1024)
-#define CONFIG_SYS_MMC_ENV_DEV	0
-#endif
-
-/* USB */
-#ifdef	CONFIG_CMD_USB
-#define CONFIG_EHCI_MXS_PORT0
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
-#endif
-
-/* Framebuffer support */
-#ifdef CONFIG_VIDEO
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_BMP_16BPP
-#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_VIDEO_BMP_GZIP
-#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE	(512 << 10)
-#endif
-
-/* Boot Linux */
-#define CONFIG_BOOTFILE		"uImage"
-#define CONFIG_LOADADDR		0x42000000
-#define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
-
-/* Extra Environments */
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"update_sd_firmware_filename=u-boot.sd\0" \
-	"update_sd_firmware="		/* Update the SD firmware partition */ \
-		"if mmc rescan ; then "	\
-		"if tftp ${update_sd_firmware_filename} ; then " \
-		"setexpr fw_sz ${filesize} / 0x200 ; "	/* SD block size */ \
-		"setexpr fw_sz ${fw_sz} + 1 ; "	\
-		"mmc write ${loadaddr} 0x800 ${fw_sz} ; " \
-		"fi ; "	\
-		"fi\0" \
-	"script=boot.scr\0"	\
-	"image=zImage\0" \
-	"console=ttyAMA0\0" \
-	"fdt_file=imx23-evk.dtb\0" \
-	"fdt_addr=0x41000000\0" \
-	"boot_fdt=try\0" \
-	"mmcdev=0\0" \
-	"mmcpart=2\0" \
-	"mmcroot=/dev/mmcblk0p3 rw rootwait\0" \
-	"mmcargs=setenv bootargs console=${console},${baudrate} " \
-		"root=${mmcroot}\0" \
-	"loadbootscript="  \
-		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
-	"bootscript=echo Running bootscript from mmc ...; "	\
-		"source\0" \
-	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
-	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
-	"mmcboot=echo Booting from mmc ...; " \
-		"run mmcargs; " \
-		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-			"if run loadfdt; then " \
-				"bootz ${loadaddr} - ${fdt_addr}; " \
-			"else " \
-				"if test ${boot_fdt} = try; then " \
-					"bootz; " \
-				"else " \
-					"echo WARN: Cannot load the DT; " \
-				"fi; " \
-			"fi; " \
-		"else " \
-			"bootz; " \
-		"fi;\0"
-
-#define CONFIG_BOOTCOMMAND \
-	"mmc dev ${mmcdev}; if mmc rescan; then " \
-		"if run loadbootscript; then " \
-			"run bootscript; " \
-		"else " \
-			"if run loadimage; then " \
-				"run mmcboot; " \
-			"else " \
-				"echo ERR: Fail to boot from MMC; " \
-			"fi; " \
-		"fi; " \
-	"else exit; fi"
-
-/* The rest of the configuration is shared */
-#include <configs/mxs.h>
-
-#endif /* __CONFIGS_MX23EVK_H__ */