diff options
Diffstat (limited to 'include/configs/mx35pdk.h')
| -rw-r--r-- | include/configs/mx35pdk.h | 225 |
1 files changed, 0 insertions, 225 deletions
diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h deleted file mode 100644 index e153dfb..0000000 --- a/include/configs/mx35pdk.h +++ /dev/null @@ -1,225 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2010, Stefano Babic <sbabic@denx.de> - * - * (C) Copyright 2008-2010 Freescale Semiconductor, Inc. - * - * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de> - * - * Configuration for the MX35pdk Freescale board. - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include <asm/arch/imx-regs.h> - - /* High Level Configuration Options */ -#define CONFIG_MX35 - -#define CONFIG_SYS_FSL_CLK - -/* Set TEXT at the beginning of the NOR flash */ - -#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -#define CONFIG_REVISION_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024) - -/* - * Hardware drivers - */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_MXC -#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ -#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ -#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ - -/* - * PMIC Configs - */ -#define CONFIG_POWER -#define CONFIG_POWER_I2C -#define CONFIG_POWER_FSL -#define CONFIG_POWER_FSL_MC13892 -#define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x08 -#define CONFIG_RTC_MC13XXX - -/* - * MFD MC9SDZ60 - */ -#define CONFIG_FSL_MC9SDZ60 -#define CONFIG_SYS_FSL_MC9SDZ60_I2C_ADDR 0x69 - -/* - * UART (console) - */ -#define CONFIG_MXC_UART -#define CONFIG_MXC_UART_BASE UART1_BASE - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -/* - * Command definition - */ - -#define CONFIG_NET_RETRY_COUNT 100 - - -#define CONFIG_LOADADDR 0x80800000 /* loadaddr env var */ - -/* - * Ethernet on the debug board (SMC911) - */ -#define CONFIG_HAS_ETH1 -#define CONFIG_ETHPRIME - -/* - * Ethernet on SOC (FEC) - */ -#define CONFIG_FEC_MXC -#define IMX_FEC_BASE FEC_BASE_ADDR -#define CONFIG_FEC_MXC_PHYADDR 0x1F - -#define CONFIG_ARP_TIMEOUT 200UL - -/* - * Miscellaneous configurable options - */ - -#define CONFIG_SYS_MEMTEST_START 0 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x10000 - -#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR - -/* - * Physical Memory Map - */ -#define PHYS_SDRAM_1 CSD0_BASE_ADDR -#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024) -#define PHYS_SDRAM_2 CSD1_BASE_ADDR -#define PHYS_SDRAM_2_SIZE (128 * 1024 * 1024) - -#define CONFIG_SYS_SDRAM_BASE CSD0_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR + 0x10000) -#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE / 2) -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_GBL_DATA_OFFSET) - -/* - * MTD Command for mtdparts - */ - -/* - * FLASH and environment organization - */ -#define CONFIG_SYS_FLASH_BASE CS0_BASE_ADDR -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ -/* Monitor at beginning of flash */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MONITOR_LEN (512 * 1024) - -#define CONFIG_ENV_SECT_SIZE (128 * 1024) -#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE - -/* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) -#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE - -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \ - CONFIG_SYS_MONITOR_LEN) - -#if defined(CONFIG_FSL_ENV_IN_NAND) - #define CONFIG_ENV_OFFSET (1024 * 1024) -#endif - -/* - * CFI FLASH driver setup - */ - -/* A non-standard buffered write algorithm */ -#define CONFIG_FLASH_SPANSION_S29WS_N - -/* - * NAND FLASH driver setup - */ -#define CONFIG_MXC_NAND_REGS_BASE (NFC_BASE_ADDR) -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE (NFC_BASE_ADDR) -#define CONFIG_MXC_NAND_HWECC -#define CONFIG_SYS_NAND_LARGEPAGE - -/* EHCI driver */ -#define CONFIG_EHCI_IS_TDI -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#define CONFIG_USB_EHCI_MXC -#define CONFIG_MXC_USB_PORT 0 -#define CONFIG_MXC_USB_FLAGS (MXC_EHCI_INTERFACE_DIFF_UNI | \ - MXC_EHCI_POWER_PINS_ENABLED | \ - MXC_EHCI_OC_PIN_ACTIVE_LOW) -#define CONFIG_MXC_USB_PORTSC (MXC_EHCI_UTMI_16BIT | MXC_EHCI_MODE_UTMI) - -/* mmc driver */ -#define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_FSL_ESDHC_NUM 1 - -/* - * Default environment and default scripts - * to update uboot and load kernel - */ - -#define CONFIG_HOSTNAME "mx35pdk" -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth1\0" \ - "ethprime=smc911x\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip_sta=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \ - "addip=if test -n ${ipdyn};then run addip_dyn;" \ - "else run addip_sta;fi\0" \ - "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ - "addtty=setenv bootargs ${bootargs}" \ - " console=ttymxc0,${baudrate}\0" \ - "addmisc=setenv bootargs ${bootargs} ${misc}\0" \ - "loadaddr=80800000\0" \ - "kernel_addr_r=80800000\0" \ - "hostname=" CONFIG_HOSTNAME "\0" \ - "bootfile=" CONFIG_HOSTNAME "/uImage\0" \ - "ramdisk_file=" CONFIG_HOSTNAME "/uRamdisk\0" \ - "flash_self=run ramargs addip addtty addmtd addmisc;" \ - "bootm ${kernel_addr} ${ramdisk_addr}\0" \ - "flash_nfs=run nfsargs addip addtty addmtd addmisc;" \ - "bootm ${kernel_addr}\0" \ - "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \ - "run nfsargs addip addtty addmtd addmisc;" \ - "bootm ${kernel_addr_r}\0" \ - "net_self_load=tftp ${kernel_addr_r} ${bootfile};" \ - "tftp ${ramdisk_addr_r} ${ramdisk_file};\0" \ - "u-boot=" CONFIG_HOSTNAME "/u-boot.bin\0" \ - "load=tftp ${loadaddr} ${u-boot}\0" \ - "uboot_addr=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0" \ - "update=protect off ${uboot_addr} +80000;" \ - "erase ${uboot_addr} +80000;" \ - "cp.b ${loadaddr} ${uboot_addr} ${filesize}\0" \ - "upd=if run load;then echo Updating u-boot;if run update;" \ - "then echo U-Boot updated;" \ - "else echo Error updating u-boot !;" \ - "echo Board without bootloader !!;" \ - "fi;" \ - "else echo U-Boot not downloaded..exiting;fi\0" \ - "bootcmd=run net_nfs\0" - -#endif /* __CONFIG_H */ |