diff options
Diffstat (limited to 'include/configs/mx6cuboxi.h')
| -rw-r--r-- | include/configs/mx6cuboxi.h | 137 |
1 files changed, 0 insertions, 137 deletions
diff --git a/include/configs/mx6cuboxi.h b/include/configs/mx6cuboxi.h deleted file mode 100644 index 3cf2f1c..0000000 --- a/include/configs/mx6cuboxi.h +++ /dev/null @@ -1,137 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2015 Freescale Semiconductor, Inc. - * - * Configuration settings for the SolidRun mx6 based boards - */ -#ifndef __MX6CUBOXI_CONFIG_H -#define __MX6CUBOXI_CONFIG_H - -#include "mx6_common.h" - -#include "imx6_spl.h" - -#define CONFIG_IMX_THERMAL - -#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M) -#define CONFIG_MXC_UART - -/* MMC Configs */ -#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR - -/* SATA Configuration */ -#ifdef CONFIG_CMD_SATA -#define CONFIG_SYS_SATA_MAX_DEVICE 1 -#define CONFIG_DWC_AHSATA_PORT_ID 0 -#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR -#define CONFIG_LBA48 -#endif - -/* Ethernet Configuration */ -#define CONFIG_FEC_MXC -#define IMX_FEC_BASE ENET_BASE_ADDR -#define CONFIG_FEC_XCV_TYPE RGMII -#define CONFIG_FEC_MXC_PHYADDR 0 -#define CONFIG_PHY_ATHEROS - -/* Framebuffer */ -#define CONFIG_VIDEO_BMP_RLE8 -#define CONFIG_SPLASH_SCREEN -#define CONFIG_SPLASH_SCREEN_ALIGN -#define CONFIG_BMP_16BPP -#define CONFIG_VIDEO_LOGO -#define CONFIG_VIDEO_BMP_LOGO -#define CONFIG_IMX_HDMI -#define CONFIG_IMX_VIDEO_SKIP - -/* USB */ -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 -#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 - -/* Command definition */ - -#define CONFIG_MXC_UART_BASE UART1_BASE -#define CONSOLE_DEV "ttymxc0" -#define CONFIG_SYS_MMC_ENV_DEV 0 /* SDHC2 */ - -#ifndef CONFIG_SPL_BUILD -#define CONFIG_EXTRA_ENV_SETTINGS \ - "som_rev=undefined\0" \ - "has_emmc=undefined\0" \ - "fdtfile=undefined\0" \ - "fdt_addr_r=0x18000000\0" \ - "fdt_addr=0x18000000\0" \ - "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ - "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ - "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \ - "ramdisk_addr_r=0x13000000\0" \ - "ramdiskaddr=0x13000000\0" \ - "initrd_high=0xffffffff\0" \ - "fdt_high=0xffffffff\0" \ - "ip_dyn=yes\0" \ - "console=" CONSOLE_DEV ",115200\0" \ - "bootm_size=0x10000000\0" \ - "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ - "finduuid=part uuid mmc 0:1 uuid\0" \ - "update_sd_firmware=" \ - "if test ${ip_dyn} = yes; then " \ - "setenv get_cmd dhcp; " \ - "else " \ - "setenv get_cmd tftp; " \ - "fi; " \ - "if mmc dev ${mmcdev}; then " \ - "if ${get_cmd} ${update_sd_firmware_filename}; then " \ - "setexpr fw_sz ${filesize} / 0x200; " \ - "setexpr fw_sz ${fw_sz} + 1; " \ - "mmc write ${loadaddr} 0x2 ${fw_sz}; " \ - "fi; " \ - "fi\0" \ - "findfdt="\ - "if test ${board_rev} = MX6Q; then " \ - "setenv fdtprefix imx6q; fi; " \ - "if test ${board_rev} = MX6DL; then " \ - "setenv fdtprefix imx6dl; fi; " \ - "if test ${som_rev} = V15; then " \ - "setenv fdtsuffix -som-v15; fi; " \ - "if test ${has_emmc} = yes; then " \ - "setenv emmcsuffix -emmc; fi; " \ - "if test ${board_name} = HUMMINGBOARD2 ; then " \ - "setenv fdtfile ${fdtprefix}-hummingboard2${emmcsuffix}${fdtsuffix}.dtb; fi; " \ - "if test ${board_name} = HUMMINGBOARD ; then " \ - "setenv fdtfile ${fdtprefix}-hummingboard${emmcsuffix}${fdtsuffix}.dtb; fi; " \ - "if test ${board_name} = CUBOXI ; then " \ - "setenv fdtfile ${fdtprefix}-cubox-i${emmcsuffix}${fdtsuffix}.dtb; fi; " \ - "if test ${fdtfile} = undefined; then " \ - "echo WARNING: Could not determine dtb to use; fi; \0" \ - BOOTENV - -#define BOOT_TARGET_DEVICES(func) \ - func(MMC, mmc, 0) \ - func(SATA, sata, 0) \ - func(USB, usb, 0) \ - func(PXE, pxe, na) \ - func(DHCP, dhcp, na) - -#include <config_distro_bootcmd.h> - -#else -#define CONFIG_EXTRA_ENV_SETTINGS -#endif /* CONFIG_SPL_BUILD */ - -/* Physical Memory Map */ -#define CONFIG_SYS_SDRAM_BASE MMDC0_ARB_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE - -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - -/* Environment organization */ -#define CONFIG_ENV_SIZE (8 * 1024) -#define CONFIG_ENV_OFFSET (SZ_1M - CONFIG_ENV_SIZE) - -#endif /* __MX6CUBOXI_CONFIG_H */ |