diff options
Diffstat (limited to 'include/configs/mx6sxsabresd.h')
| -rw-r--r-- | include/configs/mx6sxsabresd.h | 210 |
1 files changed, 0 insertions, 210 deletions
diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h deleted file mode 100644 index dc4181d..0000000 --- a/include/configs/mx6sxsabresd.h +++ /dev/null @@ -1,210 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2014 Freescale Semiconductor, Inc. - * - * Configuration settings for the Freescale i.MX6SX Sabresd board. - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include "mx6_common.h" - -#ifdef CONFIG_SPL -#include "imx6_spl.h" -#endif - -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (3 * SZ_1M) - -#define CONFIG_MXC_UART -#define CONFIG_MXC_UART_BASE UART1_BASE - -#ifdef CONFIG_IMX_BOOTAUX -/* Set to QSPI2 B flash at default */ -#define CONFIG_SYS_AUXCORE_BOOTDATA 0x78000000 - -#define UPDATE_M4_ENV \ - "m4image=m4_qspi.bin\0" \ - "loadm4image=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${m4image}\0" \ - "update_m4_from_sd=" \ - "if sf probe 1:0; then " \ - "if run loadm4image; then " \ - "setexpr fw_sz ${filesize} + 0xffff; " \ - "setexpr fw_sz ${fw_sz} / 0x10000; " \ - "setexpr fw_sz ${fw_sz} * 0x10000; " \ - "sf erase 0x0 ${fw_sz}; " \ - "sf write ${loadaddr} 0x0 ${filesize}; " \ - "fi; " \ - "fi\0" \ - "m4boot=sf probe 1:0; bootaux "__stringify(CONFIG_SYS_AUXCORE_BOOTDATA)"\0" -#else -#define UPDATE_M4_ENV "" -#endif - -#define CONFIG_EXTRA_ENV_SETTINGS \ - UPDATE_M4_ENV \ - "script=boot.scr\0" \ - "image=zImage\0" \ - "console=ttymxc0\0" \ - "fdt_high=0xffffffff\0" \ - "initrd_high=0xffffffff\0" \ - "fdt_file=imx6sx-sdb.dtb\0" \ - "fdt_addr=0x88000000\0" \ - "boot_fdt=try\0" \ - "ip_dyn=yes\0" \ - "videomode=video=ctfb:x:800,y:480,depth:24,pclk:29850,le:89,ri:164,up:23,lo:10,hs:10,vs:10,sync:0,vmode:0\0" \ - "mmcdev=2\0" \ - "mmcpart=1\0" \ - "finduuid=part uuid mmc 2:2 uuid\0" \ - "mmcargs=setenv bootargs console=${console},${baudrate} " \ - "root=PARTUUID=${uuid} rootwait rw\0" \ - "loadbootscript=" \ - "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ - "bootscript=echo Running bootscript from mmc ...; " \ - "source\0" \ - "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ - "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ - "mmcboot=echo Booting from mmc ...; " \ - "run finduuid; " \ - "run mmcargs; " \ - "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ - "if run loadfdt; then " \ - "bootz ${loadaddr} - ${fdt_addr}; " \ - "else " \ - "if test ${boot_fdt} = try; then " \ - "bootz; " \ - "else " \ - "echo WARN: Cannot load the DT; " \ - "fi; " \ - "fi; " \ - "else " \ - "bootz; " \ - "fi;\0" \ - "netargs=setenv bootargs console=${console},${baudrate} " \ - "root=/dev/nfs " \ - "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ - "netboot=echo Booting from net ...; " \ - "run netargs; " \ - "if test ${ip_dyn} = yes; then " \ - "setenv get_cmd dhcp; " \ - "else " \ - "setenv get_cmd tftp; " \ - "fi; " \ - "${get_cmd} ${image}; " \ - "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ - "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ - "bootz ${loadaddr} - ${fdt_addr}; " \ - "else " \ - "if test ${boot_fdt} = try; then " \ - "bootz; " \ - "else " \ - "echo WARN: Cannot load the DT; " \ - "fi; " \ - "fi; " \ - "else " \ - "bootz; " \ - "fi;\0" \ - "findfdt="\ - "if test test $board_rev = REVA ; then " \ - "setenv fdt_file imx6sx-sdb-reva.dtb; fi; " \ - -#define CONFIG_BOOTCOMMAND \ - "run findfdt; " \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "else run netboot; fi" - -/* Miscellaneous configurable options */ -#define CONFIG_SYS_MEMTEST_START 0x80000000 -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x10000) - -/* Physical Memory Map */ -#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE - -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - -/* MMC Configuration */ -#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC4_BASE_ADDR - -/* I2C Configs */ -#define CONFIG_SYS_I2C_MXC -#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ -#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ -#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ -#define CONFIG_SYS_I2C_SPEED 100000 - -/* Network */ -#define CONFIG_FEC_MXC - -#define IMX_FEC_BASE ENET_BASE_ADDR -#define CONFIG_FEC_MXC_PHYADDR 0x1 - -#define CONFIG_FEC_XCV_TYPE RGMII -#define CONFIG_ETHPRIME "FEC" - -#define CONFIG_PHY_ATHEROS - -#ifdef CONFIG_CMD_USB -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 -#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 -#endif - -#ifdef CONFIG_CMD_PCI -#define CONFIG_PCI_SCAN_SHOW -#define CONFIG_PCIE_IMX -#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(2, 0) -#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(2, 1) -#endif - -#define CONFIG_IMX_THERMAL - -#ifdef CONFIG_FSL_QSPI -#define CONFIG_SYS_FSL_QSPI_LE -#define CONFIG_SYS_FSL_QSPI_AHB -#ifdef CONFIG_MX6SX_SABRESD_REVA -#define FSL_QSPI_FLASH_SIZE SZ_16M -#else -#define FSL_QSPI_FLASH_SIZE SZ_32M -#endif -#define FSL_QSPI_FLASH_NUM 2 -#endif - -#ifndef CONFIG_SPL_BUILD -#ifdef CONFIG_VIDEO -#define CONFIG_VIDEO_MXS -#define CONFIG_VIDEO_LOGO -#define CONFIG_SPLASH_SCREEN -#define CONFIG_SPLASH_SCREEN_ALIGN -#define CONFIG_BMP_16BPP -#define CONFIG_VIDEO_BMP_RLE8 -#define CONFIG_VIDEO_BMP_LOGO -#define MXS_LCDIF_BASE MX6SX_LCDIF1_BASE_ADDR -#endif -#endif - -#define CONFIG_ENV_OFFSET (14 * SZ_64K) -#define CONFIG_ENV_SIZE SZ_8K - -#define CONFIG_SYS_FSL_USDHC_NUM 3 -#if defined(CONFIG_ENV_IS_IN_MMC) -#define CONFIG_SYS_MMC_ENV_DEV 2 /*USDHC4*/ -#endif - -#endif /* __CONFIG_H */ |