diff options
Diffstat (limited to 'include/configs/mx6ul_14x14_evk.h')
| -rw-r--r-- | include/configs/mx6ul_14x14_evk.h | 212 |
1 files changed, 0 insertions, 212 deletions
diff --git a/include/configs/mx6ul_14x14_evk.h b/include/configs/mx6ul_14x14_evk.h deleted file mode 100644 index 87f8869..0000000 --- a/include/configs/mx6ul_14x14_evk.h +++ /dev/null @@ -1,212 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2015 Freescale Semiconductor, Inc. - * - * Configuration settings for the Freescale i.MX6UL 14x14 EVK board. - */ -#ifndef __MX6UL_14X14_EVK_CONFIG_H -#define __MX6UL_14X14_EVK_CONFIG_H - -#include <asm/arch/imx-regs.h> -#include <linux/sizes.h> -#include "mx6_common.h" -#include <asm/mach-imx/gpio.h> - -#define is_mx6ul_9x9_evk() CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK) - -/* SPL options */ -#include "imx6_spl.h" - -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (16 * SZ_1M) - -#define CONFIG_MXC_UART -#define CONFIG_MXC_UART_BASE UART1_BASE - -/* MMC Configs */ -#ifdef CONFIG_FSL_USDHC -#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR - -/* NAND pin conflicts with usdhc2 */ -#ifdef CONFIG_NAND_MXS -#define CONFIG_SYS_FSL_USDHC_NUM 1 -#else -#define CONFIG_SYS_FSL_USDHC_NUM 2 -#endif - -#endif - -/* I2C configs */ -#ifdef CONFIG_CMD_I2C -#define CONFIG_SYS_I2C_MXC -#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ -#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ -#define CONFIG_SYS_I2C_SPEED 100000 -#endif - -#ifdef CONFIG_DM_GPIO -#define CONFIG_DM_74X164 -#endif - -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "script=boot.scr\0" \ - "image=zImage\0" \ - "console=ttymxc0\0" \ - "fdt_high=0xffffffff\0" \ - "initrd_high=0xffffffff\0" \ - "fdt_file=undefined\0" \ - "fdt_addr=0x83000000\0" \ - "boot_fdt=try\0" \ - "ip_dyn=yes\0" \ - "splashimage=" __stringify(CONFIG_LOADADDR) "\0" \ - "videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \ - "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ - "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ - "mmcautodetect=yes\0" \ - "mmcargs=setenv bootargs console=${console},${baudrate} " \ - "root=${mmcroot}\0" \ - "loadbootscript=" \ - "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ - "bootscript=echo Running bootscript from mmc ...; " \ - "source\0" \ - "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ - "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ - "mmcboot=echo Booting from mmc ...; " \ - "run mmcargs; " \ - "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ - "if run loadfdt; then " \ - "bootz ${loadaddr} - ${fdt_addr}; " \ - "else " \ - "if test ${boot_fdt} = try; then " \ - "bootz; " \ - "else " \ - "echo WARN: Cannot load the DT; " \ - "fi; " \ - "fi; " \ - "else " \ - "bootz; " \ - "fi;\0" \ - "netargs=setenv bootargs console=${console},${baudrate} " \ - "root=/dev/nfs " \ - "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ - "netboot=echo Booting from net ...; " \ - "run netargs; " \ - "if test ${ip_dyn} = yes; then " \ - "setenv get_cmd dhcp; " \ - "else " \ - "setenv get_cmd tftp; " \ - "fi; " \ - "${get_cmd} ${image}; " \ - "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ - "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ - "bootz ${loadaddr} - ${fdt_addr}; " \ - "else " \ - "if test ${boot_fdt} = try; then " \ - "bootz; " \ - "else " \ - "echo WARN: Cannot load the DT; " \ - "fi; " \ - "fi; " \ - "else " \ - "bootz; " \ - "fi;\0" \ - "findfdt="\ - "if test $fdt_file = undefined; then " \ - "if test $board_name = EVK && test $board_rev = 9X9; then " \ - "setenv fdt_file imx6ul-9x9-evk.dtb; fi; " \ - "if test $board_name = EVK && test $board_rev = 14X14; then " \ - "setenv fdt_file imx6ul-14x14-evk.dtb; fi; " \ - "if test $fdt_file = undefined; then " \ - "echo WARNING: Could not determine dtb to use; fi; " \ - "fi;\0" \ - -#define CONFIG_BOOTCOMMAND \ - "run findfdt;" \ - "mmc dev ${mmcdev};" \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "else run netboot; fi" - -/* Miscellaneous configurable options */ -#define CONFIG_SYS_MEMTEST_START 0x80000000 -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x8000000) - -#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000 - -/* Physical Memory Map */ -#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE - -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - -/* environment organization */ -#define CONFIG_ENV_SIZE SZ_8K -#define CONFIG_ENV_OFFSET (8 * SZ_64K) -#define CONFIG_SYS_MMC_ENV_DEV 1 /* USDHC2 */ -#define CONFIG_SYS_MMC_ENV_PART 0 /* user area */ -#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */ - -#ifdef CONFIG_FSL_QSPI -#define CONFIG_SYS_FSL_QSPI_AHB -#define FSL_QSPI_FLASH_NUM 1 -#define FSL_QSPI_FLASH_SIZE SZ_32M -#endif - -/* USB Configs */ -#ifdef CONFIG_CMD_USB -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 -#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 -#endif - -#ifdef CONFIG_CMD_NET -#define CONFIG_FEC_MXC -#define CONFIG_FEC_ENET_DEV 1 - -#if (CONFIG_FEC_ENET_DEV == 0) -#define IMX_FEC_BASE ENET_BASE_ADDR -#define CONFIG_FEC_MXC_PHYADDR 0x2 -#define CONFIG_FEC_XCV_TYPE RMII -#define CONFIG_ETHPRIME "eth0" -#elif (CONFIG_FEC_ENET_DEV == 1) -#define IMX_FEC_BASE ENET2_BASE_ADDR -#define CONFIG_FEC_MXC_PHYADDR 0x1 -#define CONFIG_FEC_XCV_TYPE RMII -#define CONFIG_ETHPRIME "eth1" -#endif -#endif - -#define CONFIG_IMX_THERMAL - -#ifndef CONFIG_SPL_BUILD -#if defined(CONFIG_DM_VIDEO) -#define CONFIG_VIDEO_MXS -#define CONFIG_VIDEO_LOGO -#define CONFIG_SPLASH_SCREEN -#define CONFIG_SPLASH_SCREEN_ALIGN -#define CONFIG_BMP_16BPP -#define CONFIG_VIDEO_BMP_RLE8 -#define CONFIG_VIDEO_BMP_LOGO -#define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR -#endif -#endif - -#endif |