1 files changed, 0 insertions, 229 deletions
diff --git a/include/configs/mx7dsabresd.h b/include/configs/mx7dsabresd.h
deleted file mode 100644
index e1f92da..0000000
--- a/include/configs/mx7dsabresd.h
+++ /dev/null
@@ -1,229 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2015 Freescale Semiconductor, Inc.
- *
- * Configuration settings for the Freescale i.MX7D SABRESD board.
- */
-
-#ifndef __MX7D_SABRESD_CONFIG_H
-#define __MX7D_SABRESD_CONFIG_H
-
-#include "mx7_common.h"
-
-#define PHYS_SDRAM_SIZE			SZ_1G
-
-#define CONFIG_MXC_UART_BASE            UART1_IPS_BASE_ADDR
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		(32 * SZ_1M)
-
-/* Network */
-#define CONFIG_FEC_MXC
-#define CONFIG_FEC_XCV_TYPE             RGMII
-#define CONFIG_ETHPRIME                 "FEC"
-#define CONFIG_FEC_MXC_PHYADDR          0
-
-#define CONFIG_PHY_BROADCOM
-/* ENET1 */
-#define IMX_FEC_BASE			ENET_IPS_BASE_ADDR
-
-/* MMC Config*/
-#define CONFIG_SYS_FSL_ESDHC_ADDR       0
-
-/* I2C configs */
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_SPEED		100000
-
-#define CONFIG_SYS_MMC_IMG_LOAD_PART	1
-
-#ifdef CONFIG_IMX_BOOTAUX
-/* Set to QSPI1 A flash at default */
-#define CONFIG_SYS_AUXCORE_BOOTDATA 0x60000000
-
-#define UPDATE_M4_ENV \
-	"m4image=m4_qspi.bin\0" \
-	"loadm4image=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${m4image}\0" \
-	"update_m4_from_sd=" \
-		"if sf probe 0:0; then " \
-			"if run loadm4image; then " \
-				"setexpr fw_sz ${filesize} + 0xffff; " \
-				"setexpr fw_sz ${fw_sz} / 0x10000; "	\
-				"setexpr fw_sz ${fw_sz} * 0x10000; "	\
-				"sf erase 0x0 ${fw_sz}; " \
-				"sf write ${loadaddr} 0x0 ${filesize}; " \
-			"fi; " \
-		"fi\0" \
-	"m4boot=sf probe 0:0; bootaux "__stringify(CONFIG_SYS_AUXCORE_BOOTDATA)"\0"
-#else
-#define UPDATE_M4_ENV ""
-#endif
-
-#define CONFIG_MFG_ENV_SETTINGS \
-	"mfgtool_args=setenv bootargs console=${console},${baudrate} " \
-		"rdinit=/linuxrc " \
-		"g_mass_storage.stall=0 g_mass_storage.removable=1 " \
-		"g_mass_storage.idVendor=0x066F g_mass_storage.idProduct=0x37FF "\
-		"g_mass_storage.iSerialNumber=\"\" "\
-		"clk_ignore_unused "\
-		"\0" \
-	"initrd_addr=0x83800000\0" \
-	"initrd_high=0xffffffff\0" \
-	"bootcmd_mfg=run mfgtool_args;bootz ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \
-
-#define CONFIG_DFU_ENV_SETTINGS \
-	"dfu_alt_info=image raw 0 0x800000;"\
-		"u-boot raw 0 0x4000;"\
-		"bootimg part 0 1;"\
-		"rootfs part 0 2\0" \
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	UPDATE_M4_ENV \
-	CONFIG_MFG_ENV_SETTINGS \
-	CONFIG_DFU_ENV_SETTINGS \
-	"script=boot.scr\0" \
-	"image=zImage\0" \
-	"console=ttymxc0\0" \
-	"fdt_high=0xffffffff\0" \
-	"initrd_high=0xffffffff\0" \
-	"fdt_file=imx7d-sdb.dtb\0" \
-	"fdt_addr=0x83000000\0" \
-	"boot_fdt=try\0" \
-	"ip_dyn=yes\0" \
-	"videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \
-	"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
-	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
-	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
-	"mmcautodetect=yes\0" \
-	"mmcargs=setenv bootargs console=${console},${baudrate} " \
-		"root=${mmcroot}\0" \
-	"loadbootscript=" \
-		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
-	"bootscript=echo Running bootscript from mmc ...; " \
-		"source\0" \
-	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
-	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
-	"mmcboot=echo Booting from mmc ...; " \
-		"run mmcargs; " \
-		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-			"if run loadfdt; then " \
-				"bootz ${loadaddr} - ${fdt_addr}; " \
-			"else " \
-				"if test ${boot_fdt} = try; then " \
-					"bootz; " \
-				"else " \
-					"echo WARN: Cannot load the DT; " \
-				"fi; " \
-			"fi; " \
-		"else " \
-			"bootz; " \
-		"fi;\0" \
-	"netargs=setenv bootargs console=${console},${baudrate} " \
-		"root=/dev/nfs " \
-	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
-		"netboot=echo Booting from net ...; " \
-		"run netargs; " \
-		"if test ${ip_dyn} = yes; then " \
-			"setenv get_cmd dhcp; " \
-		"else " \
-			"setenv get_cmd tftp; " \
-		"fi; " \
-		"${get_cmd} ${image}; " \
-		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
-				"bootz ${loadaddr} - ${fdt_addr}; " \
-			"else " \
-				"if test ${boot_fdt} = try; then " \
-					"bootz; " \
-				"else " \
-					"echo WARN: Cannot load the DT; " \
-				"fi; " \
-			"fi; " \
-		"else " \
-			"bootz; " \
-		"fi;\0"
-
-#define CONFIG_BOOTCOMMAND \
-	   "mmc dev ${mmcdev};" \
-	   "mmc dev ${mmcdev}; if mmc rescan; then " \
-		   "if run loadbootscript; then " \
-			   "run bootscript; " \
-		   "else " \
-			   "if run loadimage; then " \
-				   "run mmcboot; " \
-			   "else run netboot; " \
-			   "fi; " \
-		   "fi; " \
-	   "else run netboot; fi"
-
-#define CONFIG_SYS_MEMTEST_START	0x80000000
-#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x20000000)
-
-#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
-#define CONFIG_SYS_HZ			1000
-
-/* Physical Memory Map */
-#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
-
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
-#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
-#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
-
-#define CONFIG_SYS_INIT_SP_OFFSET \
-	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
-/* environment organization */
-#define CONFIG_ENV_SIZE			SZ_8K
-
-/*
- * If want to use nand, define CONFIG_NAND_MXS and rework board
- * to support nand, since emmc has pin conflicts with nand
- */
-#ifdef CONFIG_NAND_MXS
-/* NAND stuff */
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_SYS_NAND_BASE		0x40000000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-
-/* DMA stuff, needed for GPMI/MXS NAND support */
-#endif
-
-#define CONFIG_ENV_OFFSET		(12 * SZ_64K)
-#ifdef CONFIG_NAND_MXS
-#define CONFIG_SYS_FSL_USDHC_NUM	1
-#else
-#define CONFIG_SYS_FSL_USDHC_NUM	2
-#endif
-
-#define CONFIG_SYS_MMC_ENV_DEV		0   /* USDHC1 */
-#define CONFIG_SYS_MMC_ENV_PART		0	/* user area */
-#define CONFIG_MMCROOT			"/dev/mmcblk0p2"  /* USDHC1 */
-
-/* USB Configs */
-#define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
-
-#define CONFIG_IMX_THERMAL
-
-#define CONFIG_USBD_HS
-
-#ifdef CONFIG_VIDEO
-#define CONFIG_VIDEO_MXS
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
-#define CONFIG_BMP_16BPP
-#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_VIDEO_BMP_LOGO
-#endif
-
-#ifdef CONFIG_FSL_QSPI
-#define CONFIG_SYS_FSL_QSPI_AHB
-#define FSL_QSPI_FLASH_NUM		1
-#define FSL_QSPI_FLASH_SIZE		SZ_64M
-#define QSPI0_BASE_ADDR			QSPI1_IPS_BASE_ADDR
-#define QSPI0_AMBA_BASE			QSPI0_ARB_BASE_ADDR
-#endif
-
-#endif	/* __CONFIG_H */