diff options
Diffstat (limited to 'include/configs/mx7ulp_evk.h')
| -rw-r--r-- | include/configs/mx7ulp_evk.h | 163 |
1 files changed, 0 insertions, 163 deletions
diff --git a/include/configs/mx7ulp_evk.h b/include/configs/mx7ulp_evk.h deleted file mode 100644 index 3b02362..0000000 --- a/include/configs/mx7ulp_evk.h +++ /dev/null @@ -1,163 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2016 Freescale Semiconductor, Inc. - * - * Configuration settings for the Freescale i.MX7ULP EVK board. - */ - -#ifndef __MX7ULP_EVK_CONFIG_H -#define __MX7ULP_EVK_CONFIG_H - -#include <linux/sizes.h> -#include <asm/arch/imx-regs.h> - -#define CONFIG_BOARD_POSTCLK_INIT -#define CONFIG_SYS_BOOTM_LEN 0x1000000 - -#define SRC_BASE_ADDR CMC1_RBASE -#define IRAM_BASE_ADDR OCRAM_0_BASE -#define IOMUXC_BASE_ADDR IOMUXC1_RBASE - -#define CONFIG_SYS_FSL_USDHC_NUM 1 - -#define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_MMC_ENV_DEV 0 /* USDHC1 */ -#define CONFIG_SYS_MMC_ENV_PART 0 /* user area */ -#define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USDHC1 */ -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - -#define CONFIG_ENV_OFFSET (12 * SZ_64K) -#define CONFIG_ENV_SIZE SZ_8K - -/* Using ULP WDOG for reset */ -#define WDOG_BASE_ADDR WDG1_RBASE - -#define CONFIG_SYS_HZ_CLOCK 1000000 /* Fixed at 1Mhz from TSTMR */ - -#define CONFIG_INITRD_TAG -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -/*#define CONFIG_REVISION_TAG*/ - -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (8 * SZ_1M) - -#define CONFIG_BOARD_EARLY_INIT_F - -/* UART */ -#define LPUART_BASE LPUART4_RBASE - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_SYS_CACHELINE_SIZE 64 - -/* Miscellaneous configurable options */ -#define CONFIG_SYS_PROMPT "=> " -#define CONFIG_SYS_CBSIZE 512 - -#define CONFIG_SYS_MAXARGS 256 - -/* Physical Memory Map */ - -#define PHYS_SDRAM 0x60000000 -#define PHYS_SDRAM_SIZE SZ_1G -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM - -#define CONFIG_LOADADDR 0x60800000 - -#define CONFIG_SYS_MEMTEST_END 0x9E000000 - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "script=boot.scr\0" \ - "image=zImage\0" \ - "console=ttyLP0\0" \ - "fdt_high=0xffffffff\0" \ - "initrd_high=0xffffffff\0" \ - "fdt_file=imx7ulp-evk.dtb\0" \ - "fdt_addr=0x63000000\0" \ - "boot_fdt=try\0" \ - "earlycon=lpuart32,0x402D0010\0" \ - "ip_dyn=yes\0" \ - "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ - "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ - "mmcautodetect=yes\0" \ - "mmcargs=setenv bootargs console=${console},${baudrate} " \ - "root=${mmcroot}\0" \ - "loadbootscript=" \ - "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ - "bootscript=echo Running bootscript from mmc ...; " \ - "source\0" \ - "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ - "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ - "mmcboot=echo Booting from mmc ...; " \ - "run mmcargs; " \ - "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ - "if run loadfdt; then " \ - "bootz ${loadaddr} - ${fdt_addr}; " \ - "else " \ - "if test ${boot_fdt} = try; then " \ - "bootz; " \ - "else " \ - "echo WARN: Cannot load the DT; " \ - "fi; " \ - "fi; " \ - "else " \ - "bootz; " \ - "fi;\0" \ - "netargs=setenv bootargs console=${console},${baudrate} " \ - "root=/dev/nfs " \ - "ip=:::::eth0:dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ - "netboot=echo Booting from net ...; " \ - "run netargs; " \ - "if test ${ip_dyn} = yes; then " \ - "setenv get_cmd dhcp; " \ - "else " \ - "setenv get_cmd tftp; " \ - "fi; " \ - "usb start; "\ - "${get_cmd} ${image}; " \ - "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ - "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ - "bootz ${loadaddr} - ${fdt_addr}; " \ - "else " \ - "if test ${boot_fdt} = try; then " \ - "bootz; " \ - "else " \ - "echo WARN: Cannot load the DT; " \ - "fi; " \ - "fi; " \ - "else " \ - "bootz; " \ - "fi;\0" \ - -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "fi; " \ - "fi; " \ - "fi" - -#define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR - -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE SZ_256K - -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - -#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF) -#define CONFIG_CMD_CACHE -#endif - -#endif /* __CONFIG_H */ |