diff options
Diffstat (limited to 'include/configs/novena.h')
| -rw-r--r-- | include/configs/novena.h | 205 |
1 files changed, 0 insertions, 205 deletions
diff --git a/include/configs/novena.h b/include/configs/novena.h deleted file mode 100644 index cdc437c..0000000 --- a/include/configs/novena.h +++ /dev/null @@ -1,205 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Configuration settings for the Novena U-Boot. - * - * Copyright (C) 2014 Marek Vasut <marex@denx.de> - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* System configurations */ -#define CONFIG_KEYBOARD - -#include "mx6_common.h" - -/* U-Boot Commands */ - -/* U-Boot general configurations */ - -/* U-Boot environment */ -#define CONFIG_ENV_SIZE (16 * 1024) -/* - * Environment is on MMC, starting at offset 512KiB from start of the card. - * Please place first partition at offset 1MiB from the start of the card - * as recommended by GNU/fdisk. See below for details: - * http://homepage.ntlworld.com./jonathan.deboynepollard/FGA/disc-partition-alignment.html - */ -#ifdef CONFIG_CMD_MMC -#define CONFIG_SYS_MMC_ENV_DEV 0 -#define CONFIG_ENV_OFFSET (512 * 1024) -#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE -#define CONFIG_ENV_OFFSET_REDUND \ - (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) -#endif - -/* Booting Linux */ -#define CONFIG_BOOTFILE "fitImage" -#define CONFIG_HOSTNAME "novena" - -/* Physical Memory Map */ -#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE - -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - -#define CONFIG_SYS_MEMTEST_START 0x10000000 -#define CONFIG_SYS_MEMTEST_END 0x20000000 - -#define CONFIG_SYS_MALLOC_LEN (64 * 1024 * 1024) - -/* SPL */ -#include "imx6_spl.h" /* common IMX6 SPL configuration */ - -/* Ethernet Configuration */ -#ifdef CONFIG_CMD_NET -#define CONFIG_FEC_MXC -#define IMX_FEC_BASE ENET_BASE_ADDR -#define CONFIG_FEC_XCV_TYPE RGMII -#define CONFIG_ETHPRIME "FEC" -#define CONFIG_FEC_MXC_PHYADDR 0x7 -#define CONFIG_ARP_TIMEOUT 200UL -#endif - -/* I2C */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_MXC -#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ -#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ -#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ -#define CONFIG_I2C_MULTI_BUS -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_SPD_BUS_NUM 0 - -/* I2C EEPROM */ -#ifdef CONFIG_CMD_EEPROM -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#define CONFIG_SYS_I2C_EEPROM_BUS 2 -#endif - -/* MMC Configs */ -#define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_FSL_USDHC_NUM 2 - -/* PCI express */ -#ifdef CONFIG_CMD_PCI -#define CONFIG_PCI_SCAN_SHOW -#define CONFIG_PCIE_IMX -#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(3, 29) -#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(7, 12) -#endif - -/* PMIC */ -#define CONFIG_POWER -#define CONFIG_POWER_I2C -#define CONFIG_POWER_PFUZE100 -#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 - -/* SATA Configs */ -#define CONFIG_LBA48 - -/* UART */ -#define CONFIG_MXC_UART -#define CONFIG_MXC_UART_BASE UART2_BASE - -/* USB Configs */ -#ifdef CONFIG_CMD_USB -#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 -/* Gadget part */ -#define CONFIG_USBD_HS -#define CONFIG_NETCONSOLE -#endif - -/* Video output */ -#define CONFIG_VIDEO_BMP_RLE8 -#define CONFIG_SPLASH_SCREEN -#define CONFIG_BMP_16BPP -#define CONFIG_VIDEO_LOGO -#define CONFIG_IMX_HDMI -#define CONFIG_IMX_VIDEO_SKIP - -/* Extra U-Boot environment. */ -#ifndef CONFIG_SPL_BUILD -#define CONFIG_EXTRA_ENV_SETTINGS \ - "fdt_high=0xffffffff\0" \ - "initrd_high=0xffffffff\0" \ - "consdev=ttymxc1\0" \ - "baudrate=115200\0" \ - "bootdev=/dev/mmcblk0p1\0" \ - "rootdev=/dev/mmcblk0p2\0" \ - "netdev=eth0\0" \ - "kernel_addr_r="__stringify(CONFIG_LOADADDR)"\0" \ - "pxefile_addr_r="__stringify(CONFIG_LOADADDR)"\0" \ - "scriptaddr="__stringify(CONFIG_LOADADDR)"\0" \ - "ramdisk_addr_r=0x28000000\0" \ - "fdt_addr_r=0x18000000\0" \ - "fdtfile=imx6q-novena.dtb\0" \ - "stdout=serial,vidconsole\0" \ - "stderr=serial,vidconsole\0" \ - "addcons=" \ - "setenv bootargs ${bootargs} " \ - "console=${consdev},${baudrate}\0" \ - "addip=" \ - "setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:" \ - "${netmask}:${hostname}:${netdev}:off\0" \ - "addmisc=" \ - "setenv bootargs ${bootargs} ${miscargs}\0" \ - "addargs=run addcons addmisc\0" \ - "mmcload=" \ - "mmc rescan ; " \ - "ext4load mmc 0:1 ${kernel_addr_r} ${bootfile}\0" \ - "netload=" \ - "tftp ${kernel_addr_r} ${hostname}/${bootfile}\0" \ - "miscargs=nohlt panic=1\0" \ - "mmcargs=setenv bootargs root=${rootdev} rw rootwait\0" \ - "nfsargs=" \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath},v3,tcp\0" \ - "mmc_mmc=" \ - "run mmcload mmcargs addargs ; " \ - "bootm ${kernel_addr_r}\0" \ - "mmc_nfs=" \ - "run mmcload nfsargs addip addargs ; " \ - "bootm ${kernel_addr_r}\0" \ - "net_mmc=" \ - "run netload mmcargs addargs ; " \ - "bootm ${kernel_addr_r}\0" \ - "net_nfs=" \ - "run netload nfsargs addip addargs ; " \ - "bootm ${kernel_addr_r}\0" \ - "update_sd_spl_filename=SPL\0" \ - "update_sd_uboot_filename=u-boot.img\0" \ - "update_sd_firmware=" /* Update the SD firmware partition */ \ - "if mmc rescan ; then " \ - "if dhcp ${update_sd_spl_filename} ; then " \ - "mmc write ${loadaddr} 2 0x200 ; " \ - "fi ; " \ - "if dhcp ${update_sd_uboot_filename} ; then " \ - "fatwrite mmc 0:1 ${loadaddr} u-boot.img ${filesize} ; "\ - "fi ; " \ - "fi\0" \ - BOOTENV - -#define BOOT_TARGET_DEVICES(func) \ - func(MMC, mmc, 0) \ - func(USB, usb, 0) \ - func(SATA, sata, 0) \ - func(PXE, pxe, na) \ - func(DHCP, dhcp, na) - -#include <config_distro_bootcmd.h> - -#else -#define CONFIG_EXTRA_ENV_SETTINGS -#endif /* CONFIG_SPL_BUILD */ - -#endif /* __CONFIG_H */ |