diff options
Diffstat (limited to 'include/configs/omap3_beagle.h')
| -rw-r--r-- | include/configs/omap3_beagle.h | 225 |
1 files changed, 0 insertions, 225 deletions
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h deleted file mode 100644 index e8c6083..0000000 --- a/include/configs/omap3_beagle.h +++ /dev/null @@ -1,225 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2006-2008 - * Texas Instruments. - * Richard Woodruff <r-woodruff2@ti.com> - * Syed Mohammed Khasim <x0khasim@ti.com> - * - * Configuration settings for the TI OMAP3530 Beagle board. - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include <configs/ti_omap3_common.h> - -/* - * We are only ever GP parts and will utilize all of the "downloaded image" - * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB). - */ - -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG -#define CONFIG_REVISION_TAG - -/* NAND */ -#if defined(CONFIG_NAND) -#define CONFIG_SYS_FLASH_BASE NAND_BASE -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_5_ADDR_CYCLE -#define CONFIG_SYS_NAND_PAGE_COUNT 64 -#define CONFIG_SYS_NAND_PAGE_SIZE 2048 -#define CONFIG_SYS_NAND_OOBSIZE 64 -#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) -#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS -#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\ - 10, 11, 12, 13} -#define CONFIG_SYS_NAND_ECCSIZE 512 -#define CONFIG_SYS_NAND_ECCBYTES 3 -#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW_DETECTION_SW -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 -#define CONFIG_SYS_ENV_SECT_SIZE SZ_128K -#define CONFIG_ENV_ADDR 0x260000 -#define CONFIG_ENV_OVERWRITE -/* NAND: SPL falcon mode configs */ -#if defined(CONFIG_SPL_OS_BOOT) -#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x2a0000 -#endif /* CONFIG_SPL_OS_BOOT */ -#endif /* CONFIG_NAND */ - -/* USB EHCI */ -#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 147 - -/* Enable Multi Bus support for I2C */ -#define CONFIG_I2C_MULTI_BUS - -/* DSS Support */ - -/* TWL4030 LED Support */ - -#define MEM_LAYOUT_ENV_SETTINGS \ - DEFAULT_LINUX_BOOT_ENV - -#define BOOTENV_DEV_LEGACY_MMC(devtypeu, devtypel, instance) \ - "bootcmd_" #devtypel #instance "=" \ - "setenv mmcdev " #instance "; " \ - "run mmcboot\0" -#define BOOTENV_DEV_NAME_LEGACY_MMC(devtypeu, devtypel, instance) \ - #devtypel #instance " " - -#if defined(CONFIG_NAND) - -#define BOOTENV_DEV_NAND(devtypeu, devtypel, instance) \ - "bootcmd_" #devtypel #instance "=" \ - "if test ${mtdids} = '' || test ${mtdparts} = '' ; then " \ - "echo NAND boot disabled: No mtdids and/or mtdparts; " \ - "else " \ - "run nandboot; " \ - "fi\0" -#define BOOTENV_DEV_NAME_NAND(devtypeu, devtypel, instance) \ - #devtypel #instance " " - -#define BOOT_TARGET_DEVICES(func) \ - func(MMC, mmc, 0) \ - func(LEGACY_MMC, legacy_mmc, 0) \ - func(UBIFS, ubifs, 0) \ - func(NAND, nand, 0) - -#else /* !CONFIG_NAND */ - -#define BOOT_TARGET_DEVICES(func) \ - func(MMC, mmc, 0) \ - func(LEGACY_MMC, legacy_mmc, 0) - -#endif /* CONFIG_NAND */ - -#include <config_distro_bootcmd.h> - -#define CONFIG_EXTRA_ENV_SETTINGS \ - MEM_LAYOUT_ENV_SETTINGS \ - "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \ - "fdt_high=0xffffffff\0" \ - "console=ttyO2,115200n8\0" \ - "bootdir=/boot\0" \ - "bootenv=uEnv.txt\0" \ - "bootfile=zImage\0" \ - "bootpart=0:2\0" \ - "bootubivol=rootfs\0" \ - "bootubipart=rootfs\0" \ - "usbtty=cdc_acm\0" \ - "mpurate=auto\0" \ - "buddy=none\0" \ - "camera=none\0" \ - "vram=12M\0" \ - "dvimode=640x480MR-16@60\0" \ - "defaultdisplay=dvi\0" \ - "defaultargs=setenv defargs " \ - "mpurate=${mpurate} " \ - "buddy=${buddy} "\ - "camera=${camera} "\ - "vram=${vram} " \ - "omapfb.mode=dvi:${dvimode} " \ - "omapdss.def_disp=${defaultdisplay}\0" \ - "optargs=\0" \ - "findfdt=" \ - "if test $beaglerev = AxBx; then " \ - "setenv fdtfile omap3-beagle.dtb; fi; " \ - "if test $beaglerev = Cx; then " \ - "setenv fdtfile omap3-beagle.dtb; fi; " \ - "if test $beaglerev = C4; then " \ - "setenv fdtfile omap3-beagle.dtb; fi; " \ - "if test $beaglerev = xMAB; then " \ - "setenv fdtfile omap3-beagle-xm-ab.dtb; fi; " \ - "if test $beaglerev = xMC; then " \ - "setenv fdtfile omap3-beagle-xm.dtb; fi; " \ - "if test $fdtfile = undefined; then " \ - "echo WARNING: Could not determine device tree to use; fi\0" \ - "mmcdev=0\0" \ - "mmcpart=2\0" \ - "mmcroot=/dev/mmcblk0p2 rw\0" \ - "mmcrootfstype=ext4 rootwait\0" \ - "mmcargs=run defaultargs; setenv bootargs console=${console} " \ - "${mtdparts} " \ - "${defargs} " \ - "${optargs} " \ - "root=${mmcroot} " \ - "rootfstype=${mmcrootfstype}\0" \ - "userbutton_xm=gpio input 4;\0" \ - "userbutton_nonxm=gpio input 7;\0" \ - "userbutton=if gpio input 173; then " \ - "run userbutton_xm; " \ - "else " \ - "run userbutton_nonxm; " \ - "fi;\0" \ - "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ - "ext4bootenv=ext4load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootenv}\0" \ - "importbootenv=echo Importing environment from mmc${mmcdev} ...; " \ - "env import -t ${loadaddr} ${filesize}\0" \ - "mmcbootenv=setenv bootpart ${mmcdev}:${mmcpart}; " \ - "mmc dev ${mmcdev}; " \ - "if mmc rescan; then " \ - "if run userbutton; then " \ - "setenv bootenv uEnv.txt;" \ - "else " \ - "setenv bootenv user.txt;" \ - "fi;" \ - "run loadbootenv && run importbootenv; " \ - "run ext4bootenv && run importbootenv; " \ - "if test -n $uenvcmd; then " \ - "echo Running uenvcmd ...; " \ - "run uenvcmd; " \ - "fi; " \ - "fi\0" \ - "validatefdt=" \ - "if test $beaglerev = xMAB; then " \ - "if test ! -e mmc ${bootpart} ${bootdir}/${fdtfile}; then " \ - "setenv fdtfile omap3-beagle-xm.dtb; " \ - "fi; " \ - "fi; \0" \ - "loadimage=ext4load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ - "loaddtb=run validatefdt; ext4load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ - "mmcboot=run mmcbootenv; " \ - "if run loadimage && run loaddtb; then " \ - "echo Booting ${bootdir}/${bootfile} from mmc ${bootpart} ...; " \ - "run mmcargs; " \ - "if test ${bootfile} = uImage; then " \ - "bootm ${loadaddr} - ${fdtaddr}; " \ - "fi; " \ - "if test ${bootfile} = zImage; then " \ - "bootz ${loadaddr} - ${fdtaddr}; " \ - "fi; " \ - "fi\0" \ - "nandroot=ubi0:rootfs ubi.mtd=rootfs rw\0" \ - "nandrootfstype=ubifs rootwait\0" \ - "nandargs=run defaultargs; setenv bootargs console=${console} " \ - "${mtdparts} " \ - "${defargs} " \ - "${optargs} " \ - "root=${nandroot} " \ - "rootfstype=${nandrootfstype}\0" \ - "nandboot=if nand read ${loadaddr} kernel && nand read ${fdtaddr} dtb; then " \ - "echo Booting uImage from NAND MTD 'kernel' partition ...; " \ - "run nandargs; " \ - "bootm ${loadaddr} - ${fdtaddr}; " \ - "fi\0" \ - "loadramdisk=ext4load mmc ${bootpart} ${rdaddr} ${bootdir}/${ramdisk}\0" \ - "ramdisk=rootfs.ext2.gz.uboot\0" \ - "ramdisk_size=16384\0" \ - "ramroot=/dev/ram rw\0" \ - "ramrootfstype=ext2\0" \ - "ramargs=run defaultargs; setenv bootargs console=${console} " \ - "${mtdparts} " \ - "${defargs} " \ - "${optargs} " \ - "root=${ramroot} ramdisk_size=${ramdisk_size} " \ - "rootfstype=${ramrootfstype}\0" \ - "ramboot=run mmcbootenv; " \ - "if run loadimage && run loaddtb && run loadramdisk; then " \ - "echo Booting ${bootdir}/${bootfile} from mmc ${bootpart} w/ramdisk ...; " \ - "run ramargs; " \ - "bootz ${loadaddr} ${rdaddr} ${fdtaddr}; " \ - "fi\0" \ - BOOTENV - -#endif /* __CONFIG_H */ |