diff options
Diffstat (limited to 'include/configs/omap3_cairo.h')
| -rw-r--r-- | include/configs/omap3_cairo.h | 217 |
1 files changed, 0 insertions, 217 deletions
diff --git a/include/configs/omap3_cairo.h b/include/configs/omap3_cairo.h deleted file mode 100644 index 9e2b752..0000000 --- a/include/configs/omap3_cairo.h +++ /dev/null @@ -1,217 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Configuration settings for the QUIPOS Cairo board. - * - * Copyright (C) DENX GmbH - * - * Author : - * Albert ARIBAUD <albert.aribaud@3adev.fr> - * - * Derived from EVM code by - * Manikandan Pillai <mani.pillai@ti.com> - * Itself derived from Beagle Board and 3430 SDP code by - * Richard Woodruff <r-woodruff2@ti.com> - * Syed Mohammed Khasim <khasim@ti.com> - * - * Also derived from include/configs/omap3_beagle.h - */ - -#ifndef __OMAP3_CAIRO_CONFIG_H -#define __OMAP3_CAIRO_CONFIG_H - -/* - * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM - * 64 bytes before this address should be set aside for u-boot.img's - * header. That is 0x800FFFC0--0x80100000 should not be used for any - * other needs. We use this rather than the inherited defines from - * ti_armv7_common.h for backwards compatibility. - */ -#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE -#define CONFIG_SPL_BSS_START_ADDR 0x80000000 -#define CONFIG_SPL_BSS_MAX_SIZE (512 << 10) /* 512 KB */ -#define CONFIG_SYS_SPL_MALLOC_START 0x80208000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 - -#include <configs/ti_omap3_common.h> - -#define CONFIG_REVISION_TAG 1 -#define CONFIG_ENV_OVERWRITE - -/* Enable Multi Bus support for I2C */ -#define CONFIG_I2C_MULTI_BUS 1 - -/* Probe all devices */ -#define CONFIG_SYS_I2C_NOPROBES { {0x0, 0x0} } - -/* - * TWL4030 - */ - -/* - * Board NAND Info. - */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ - /* devices */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "machid=ffffffff\0" \ - "fdt_high=0x87000000\0" \ - "baudrate=115200\0" \ - "fec_addr=00:50:C2:7E:90:F0\0" \ - "netmask=255.255.255.0\0" \ - "ipaddr=192.168.2.9\0" \ - "gateway=192.168.2.1\0" \ - "serverip=192.168.2.10\0" \ - "nfshost=192.168.2.10\0" \ - "stdin=serial\0" \ - "stdout=serial\0" \ - "stderr=serial\0" \ - "bootargs_mmc_ramdisk=mem=128M " \ - "console=ttyO1,115200n8 " \ - "root=/dev/ram0 rw " \ - "initrd=0x81600000,16M " \ - "mpurate=600 ramdisk_size=16384 omapfb.rotate=1 " \ - "omapfb.rotate_type=1 omap_vout.vid1_static_vrfb_alloc=y\0" \ - "mmcboot=mmc init; " \ - "fatload mmc 0 0x80000000 uImage; " \ - "fatload mmc 0 0x81600000 ramdisk.gz; " \ - "setenv bootargs ${bootargs_mmc_ramdisk}; " \ - "bootm 0x80000000\0" \ - "bootargs_nfs=mem=99M console=ttyO0,115200n8 noinitrd rw ip=dhcp " \ - "root=/dev/nfs " \ - "nfsroot=192.168.2.10:/home/spiid/workdir/Quipos/rootfs,nolock " \ - "mpurate=600 omapfb.rotate=1 omapfb.rotate_type=1 " \ - "omap_vout.vid1_static_vrfb_alloc=y\0" \ - "boot_nfs=run get_kernel; setenv bootargs ${bootargs_nfs}; " \ - "bootm 0x80000000\0" \ - "bootargs_nand=mem=128M console=ttyO1,115200n8 noinitrd " \ - "root=/dev/mtdblock4 rw rootfstype=jffs2 mpurate=600 " \ - "omap_vout.vid1_static_vrfb_alloc=y omapfb.rotate=1 " \ - "omapfb.rotate_type=1\0" \ - "boot_nand=nand read.i 0x80000000 280000 300000; setenv " \ - "bootargs ${bootargs_nand}; bootm 0x80000000\0" \ - "ledorange=i2c dev 1; i2c mw 60 00 00 1; i2c mw 60 14 FF 1; " \ - "i2c mw 60 15 FF 1; i2c mw 60 16 FF 1; i2c mw 60 17 FF 1; " \ - "i2c mw 60 09 10 1; i2c mw 60 06 10 1\0" \ - "ledgreen=i2c dev 1; i2c mw 60 00 00 1; i2c mw 60 14 FF 1; " \ - "i2c mw 60 15 FF 1; i2c mw 60 16 FF 1; i2c mw 60 17 FF 1; i2c " \ - "mw 60 09 00 1; i2c mw 60 06 10 1\0" \ - "ledoff=i2c dev 1; i2c mw 60 00 00 1; i2c mw 60 14 FF 1; " \ - "i2c mw 60 15 FF 1; i2c mw 60 16 FF 1; i2c mw 60 17 FF 1; " \ - "i2c mw 60 09 00 1; i2c mw 60 06 0 1\0" \ - "ledred=i2c dev 1; i2c mw 60 00 00 1; i2c mw 60 14 FF 1; " \ - "i2c mw 60 15 FF 1; i2c mw 60 16 FF 1; i2c mw 60 17 FF 1; " \ - "i2c mw 60 09 10 1; i2c mw 60 06 0 1\0" \ - "flash_xloader=mw.b 0x81600000 0xff 0x20000; " \ - "nand erase 0 20000; " \ - "fatload mmc 0 0x81600000 MLO; " \ - "nandecc hw; " \ - "nand write.i 0x81600000 0 20000;\0" \ - "flash_uboot=mw.b 0x81600000 0xff 0x40000; " \ - "nand erase 80000 40000; " \ - "fatload mmc 0 0x81600000 u-boot.bin; " \ - "nandecc sw; " \ - "nand write.i 0x81600000 80000 40000;\0" \ - "flash_kernel=mw.b 0x81600000 0xff 0x300000; " \ - "nand erase 280000 300000; " \ - "fatload mmc 0 0x81600000 uImage; " \ - "nandecc sw; " \ - "nand write.i 0x81600000 280000 300000;\0" \ - "flash_rootfs=fatload mmc 0 0x81600000 rootfs.jffs2; " \ - "nandecc sw; " \ - "nand write.jffs2 0x680000 0xFF ${filesize}; " \ - "nand erase 680000 ${filesize}; " \ - "nand write.jffs2 81600000 680000 ${filesize};\0" \ - "flash_scrub=nand scrub; " \ - "run flash_xloader; " \ - "run flash_uboot; " \ - "run flash_kernel; " \ - "run flash_rootfs;\0" \ - "flash_all=run ledred; " \ - "nand erase.chip; " \ - "run ledorange; " \ - "run flash_xloader; " \ - "run flash_uboot; " \ - "run flash_kernel; " \ - "run flash_rootfs; " \ - "run ledgreen; " \ - "run boot_nand; \0" \ - -#define CONFIG_BOOTCOMMAND \ - "if fatload mmc 0 0x81600000 MLO; then run flash_all; " \ - "else run boot_nand; fi" - -/* - * OMAP3 has 12 GP timers, they can be driven by the system clock - * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). - * This rate is divided by a local divisor. - */ -#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ - -/* **** PISMO SUPPORT *** */ -#if defined(CONFIG_CMD_NAND) -#define CONFIG_SYS_FLASH_BASE NAND_BASE -#endif - -/* Monitor at start of flash */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP - -#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ -#define CONFIG_ENV_ADDR 0x260000 - -/* Defines for SPL */ - -/* NAND boot config */ -#define CONFIG_SYS_NAND_5_ADDR_CYCLE -#define CONFIG_SYS_NAND_PAGE_COUNT 64 -#define CONFIG_SYS_NAND_PAGE_SIZE 2048 -#define CONFIG_SYS_NAND_OOBSIZE 64 -#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) -#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 -#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\ - 10, 11, 12, 13} -#define CONFIG_SYS_NAND_ECCSIZE 512 -#define CONFIG_SYS_NAND_ECCBYTES 3 -#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 -/* NAND: SPL falcon mode configs */ -#ifdef CONFIG_SPL_OS_BOOT -#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 -#endif - -/* env defaults */ -#define CONFIG_BOOTFILE "uImage" - -/* Provide the MACH_TYPE value the vendor kernel requires */ -#define CONFIG_MACH_TYPE 3063 - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ - -/* **** PISMO SUPPORT *** */ - -#define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors */ - /* on one chip */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ - -/*----------------------------------------------------------------------- - * CFI FLASH driver setup - */ -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ) -#define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ) - -/* Flash banks JFFS2 should use */ -#define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \ - CONFIG_SYS_MAX_NAND_DEVICE) -#define CONFIG_SYS_JFFS2_MEM_NAND -/* use flash_info[2] */ -#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS -#define CONFIG_SYS_JFFS2_NUM_BANKS 1 - -#endif /* __OMAP3_CAIRO_CONFIG_H */ |