diff options
Diffstat (limited to 'include/configs/omap3_evm.h')
-rw-r--r-- | include/configs/omap3_evm.h | 157 |
1 files changed, 0 insertions, 157 deletions
diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h deleted file mode 100644 index 8e98977..0000000 --- a/include/configs/omap3_evm.h +++ /dev/null @@ -1,157 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Configuration settings for the TI OMAP3 EVM board. - * - * Copyright (C) 2006-2011 Texas Instruments Incorporated - http://www.ti.com/ - * - * Author : - * Manikandan Pillai <mani.pillai@ti.com> - * Derived from Beagle Board and 3430 SDP code by - * Richard Woodruff <r-woodruff2@ti.com> - * Syed Mohammed Khasim <khasim@ti.com> - * - * Manikandan Pillai <mani.pillai@ti.com> - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include <configs/ti_omap3_common.h> - -/* - * We are only ever GP parts and will utilize all of the "downloaded image" - * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB). - */ - -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG -#define CONFIG_REVISION_TAG - -/* NAND */ -#if defined(CONFIG_NAND) -#define CONFIG_SYS_FLASH_BASE NAND_BASE -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_5_ADDR_CYCLE -#define CONFIG_SYS_NAND_PAGE_COUNT 64 -#define CONFIG_SYS_NAND_PAGE_SIZE 2048 -#define CONFIG_SYS_NAND_OOBSIZE 64 -#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) -#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS -#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\ - 10, 11, 12, 13} -#define CONFIG_SYS_NAND_ECCSIZE 512 -#define CONFIG_SYS_NAND_ECCBYTES 3 -#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW_DETECTION_SW -#define CONFIG_SYS_ENV_SECT_SIZE SZ_128K -#define CONFIG_ENV_ADDR 0x260000 -#define CONFIG_ENV_OVERWRITE -/* NAND: SPL falcon mode configs */ -#if defined(CONFIG_SPL_OS_BOOT) -#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x2a0000 -#endif /* CONFIG_SPL_OS_BOOT */ -#endif /* CONFIG_NAND */ - -#define MEM_LAYOUT_ENV_SETTINGS \ - DEFAULT_LINUX_BOOT_ENV - -#define BOOTENV_DEV_LEGACY_MMC(devtypeu, devtypel, instance) \ - "bootcmd_" #devtypel #instance "=" \ - "setenv mmcdev " #instance "; " \ - "run mmcboot\0" -#define BOOTENV_DEV_NAME_LEGACY_MMC(devtypeu, devtypel, instance) \ - #devtypel #instance " " - -#if defined(CONFIG_NAND) - -#define BOOTENV_DEV_NAND(devtypeu, devtypel, instance) \ - "bootcmd_" #devtypel #instance "=" \ - "if test ${mtdids} = '' || test ${mtdparts} = '' ; then " \ - "echo NAND boot disabled: No mtdids and/or mtdparts; " \ - "else " \ - "run nandboot; " \ - "fi\0" -#define BOOTENV_DEV_NAME_NAND(devtypeu, devtypel, instance) \ - #devtypel #instance " " - -#define BOOT_TARGET_DEVICES(func) \ - func(MMC, mmc, 0) \ - func(LEGACY_MMC, legacy_mmc, 0) \ - func(UBIFS, ubifs, 0) \ - func(NAND, nand, 0) - -#else /* !CONFIG_NAND */ - -#define BOOT_TARGET_DEVICES(func) \ - func(MMC, mmc, 0) \ - func(LEGACY_MMC, legacy_mmc, 0) - -#endif /* CONFIG_NAND */ - -#include <config_distro_bootcmd.h> - -#define CONFIG_EXTRA_ENV_SETTINGS \ - MEM_LAYOUT_ENV_SETTINGS \ - "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \ - "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \ - "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ - "fdt_high=0xffffffff\0" \ - "console=ttyO0,115200n8\0" \ - "bootdir=/boot\0" \ - "bootenv=uEnv.txt\0" \ - "bootfile=zImage\0" \ - "bootpart=0:2\0" \ - "bootubivol=rootfs\0" \ - "bootubipart=rootfs\0" \ - "optargs=\0" \ - "mmcdev=0\0" \ - "mmcpart=2\0" \ - "mmcroot=/dev/mmcblk0p2 rw\0" \ - "mmcrootfstype=ext4 rootwait\0" \ - "mmcargs=setenv bootargs console=${console} " \ - "${mtdparts} " \ - "${optargs} " \ - "root=${mmcroot} " \ - "rootfstype=${mmcrootfstype}\0" \ - "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ - "ext4bootenv=ext4load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootenv}\0" \ - "importbootenv=echo Importing environment from mmc${mmcdev} ...; " \ - "env import -t ${loadaddr} ${filesize}\0" \ - "mmcbootenv=setenv bootpart ${mmcdev}:${mmcpart}; " \ - "mmc dev ${mmcdev}; " \ - "if mmc rescan; then " \ - "run loadbootenv && run importbootenv; " \ - "run ext4bootenv && run importbootenv; " \ - "if test -n $uenvcmd; then " \ - "echo Running uenvcmd ...; " \ - "run uenvcmd; " \ - "fi; " \ - "fi\0" \ - "loadimage=ext4load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ - "loaddtb=ext4load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ - "mmcboot=run mmcbootenv; " \ - "if run loadimage && run loaddtb; then " \ - "echo Booting ${bootdir}/${bootfile} from mmc ${bootpart} ...; " \ - "run mmcargs; " \ - "if test ${bootfile} = uImage; then " \ - "bootm ${loadaddr} - ${fdtaddr}; " \ - "fi; " \ - "if test ${bootfile} = zImage; then " \ - "bootz ${loadaddr} - ${fdtaddr}; " \ - "fi; " \ - "fi\0" \ - "nandroot=ubi0:rootfs ubi.mtd=rootfs rw noinitrd\0" \ - "nandrootfstype=ubifs rootwait\0" \ - "nandargs=setenv bootargs console=${console} " \ - "${mtdparts} " \ - "${optargs} " \ - "root=${nandroot} " \ - "rootfstype=${nandrootfstype}\0" \ - "nandboot=if nand read ${loadaddr} kernel && nand read ${fdtaddr} dtb; then " \ - "echo Booting uImage from NAND MTD 'kernel' partition ...; " \ - "run nandargs; " \ - "bootm ${loadaddr} - ${fdtaddr}; " \ - "fi\0" \ - BOOTENV - -#endif /* __CONFIG_H */ |