1 files changed, 0 insertions, 97 deletions
diff --git a/include/configs/origen.h b/include/configs/origen.h
deleted file mode 100644
index 44561ac..0000000
--- a/include/configs/origen.h
+++ /dev/null
@@ -1,97 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2011 Samsung Electronics
- *
- * Configuration settings for the SAMSUNG ORIGEN (EXYNOS4210) board.
- */
-
-#ifndef __CONFIG_ORIGEN_H
-#define __CONFIG_ORIGEN_H
-
-#include <configs/exynos4-common.h>
-
-/* High Level Configuration Options */
-#define CONFIG_EXYNOS4210		1	/* which is a EXYNOS4210 SoC */
-#define CONFIG_ORIGEN			1	/* working with ORIGEN*/
-
-/* ORIGEN has 4 bank of DRAM */
-#define CONFIG_SYS_SDRAM_BASE		0x40000000
-#define PHYS_SDRAM_1			CONFIG_SYS_SDRAM_BASE
-#define SDRAM_BANK_SIZE			(256 << 20)	/* 256 MB */
-
-/* memtest works on */
-#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x6000000)
-#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x3E00000)
-
-#define CONFIG_MACH_TYPE		MACH_TYPE_ORIGEN
-
-/* select serial console configuration */
-
-/* Console configuration */
-#define CONFIG_DEFAULT_CONSOLE		"console=ttySAC1,115200n8\0"
-
-#define CONFIG_SYS_MEM_TOP_HIDE	(1 << 20)	/* ram console */
-
-#define CONFIG_SYS_MONITOR_BASE	0x00000000
-
-/* Power Down Modes */
-#define S5P_CHECK_SLEEP			0x00000BAD
-#define S5P_CHECK_DIDLE			0xBAD00000
-#define S5P_CHECK_LPA			0xABAD0000
-
-/* MMC SPL */
-#define COPY_BL2_FNPTR_ADDR	0x02020030
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"loadaddr=0x40007000\0" \
-	"rdaddr=0x48000000\0" \
-	"kerneladdr=0x40007000\0" \
-	"ramdiskaddr=0x48000000\0" \
-	"console=ttySAC2,115200n8\0" \
-	"mmcdev=0\0" \
-	"bootenv=uEnv.txt\0" \
-	"loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
-	"importbootenv=echo Importing environment from mmc ...; " \
-		"env import -t $loadaddr $filesize\0" \
-        "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
-        "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
-                "source ${loadaddr}\0"
-#define CONFIG_BOOTCOMMAND \
-	"if mmc rescan; then " \
-		"echo SD/MMC found on device ${mmcdev};" \
-		"if run loadbootenv; then " \
-			"echo Loaded environment from ${bootenv};" \
-			"run importbootenv;" \
-		"fi;" \
-		"if test -n $uenvcmd; then " \
-			"echo Running uenvcmd ...;" \
-			"run uenvcmd;" \
-		"fi;" \
-		"if run loadbootscript; then " \
-			"run bootscript; " \
-		"fi; " \
-	"fi;" \
-	"load mmc ${mmcdev} ${loadaddr} uImage; bootm ${loadaddr} "
-
-#define CONFIG_CLK_1000_400_200
-
-/* MIU (Memory Interleaving Unit) */
-#define CONFIG_MIU_2BIT_21_7_INTERLEAVED
-
-#define CONFIG_SYS_MMC_ENV_DEV		0
-#define CONFIG_ENV_SIZE			(16 << 10)	/* 16 KB */
-#define RESERVE_BLOCK_SIZE		(512)
-#define BL1_SIZE			(16 << 10) /*16 K reserved for BL1*/
-#define CONFIG_ENV_OFFSET		(RESERVE_BLOCK_SIZE + BL1_SIZE)
-
-#define CONFIG_SPL_MAX_FOOTPRINT	(14 * 1024)
-
-#define CONFIG_SYS_INIT_SP_ADDR		0x02040000
-
-/* U-Boot copy size from boot Media to DRAM.*/
-#define COPY_BL2_SIZE		0x80000
-#define BL2_START_OFFSET	((CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)/512)
-#define BL2_SIZE_BLOC_COUNT	(COPY_BL2_SIZE/512)
-
-#endif	/* __CONFIG_H */