diff options
Diffstat (limited to 'include/configs/ot1200.h')
| -rw-r--r-- | include/configs/ot1200.h | 103 |
1 files changed, 0 insertions, 103 deletions
diff --git a/include/configs/ot1200.h b/include/configs/ot1200.h deleted file mode 100644 index 4efef89..0000000 --- a/include/configs/ot1200.h +++ /dev/null @@ -1,103 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2010-2013 Freescale Semiconductor, Inc. - * Copyright (C) 2014 Bachmann electronic GmbH - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include "mx6_common.h" - -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) - -/* UART Configs */ -#define CONFIG_MXC_UART -#define CONFIG_MXC_UART_BASE UART1_BASE - -/* SF Configs */ - -/* IO expander */ -#define CONFIG_PCA953X -#define CONFIG_SYS_I2C_PCA953X_ADDR 0x20 -#define CONFIG_SYS_I2C_PCA953X_WIDTH { {0x20, 16} } - -/* I2C Configs */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_MXC -#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ -#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ -#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ -#define CONFIG_SYS_I2C_SPEED 100000 - -/* OCOTP Configs */ -#define CONFIG_IMX_OTP -#define IMX_OTP_BASE OCOTP_BASE_ADDR -#define IMX_OTP_ADDR_MAX 0x7F -#define IMX_OTP_DATA_ERROR_VAL 0xBADABADA -#define IMX_OTPWRITE_ENABLED - -/* MMC Configs */ -#define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_FSL_USDHC_NUM 2 - -/* USB Configs */ -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 - -/* - * SATA Configs - */ -#ifdef CONFIG_CMD_SATA -#define CONFIG_SYS_SATA_MAX_DEVICE 1 -#define CONFIG_DWC_AHSATA_PORT_ID 0 -#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR -#define CONFIG_LBA48 -#endif - -/* SPL */ -#ifdef CONFIG_SPL -#include "imx6_spl.h" -#endif - -#define CONFIG_FEC_MXC -#define IMX_FEC_BASE ENET_BASE_ADDR -#define CONFIG_FEC_XCV_TYPE MII100 -#define CONFIG_ETHPRIME "FEC" -#define CONFIG_FEC_MXC_PHYADDR 0x5 -#define CONFIG_PHY_SMSC - -#ifndef CONFIG_SPL -#define CONFIG_ENV_EEPROM_IS_ON_I2C -#define CONFIG_SYS_I2C_EEPROM_BUS 1 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 -#endif - -/* Thermal support */ -#define CONFIG_IMX_THERMAL - -/* Physical Memory Map */ -#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE - -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - -/* Environment organization */ -#define CONFIG_ENV_SIZE (64 * 1024) /* 64 kb */ -#define CONFIG_ENV_OFFSET (1024 * 1024) -/* M25P16 has an erase size of 64 KiB */ -#define CONFIG_ENV_SECT_SIZE (64 * 1024) - -#define CONFIG_BOOTP_SERVERIP -#define CONFIG_BOOTP_BOOTFILE - -#endif /* __CONFIG_H */ |