diff options
Diffstat (limited to 'include/configs/pcl063_ull.h')
| -rw-r--r-- | include/configs/pcl063_ull.h | 116 |
1 files changed, 0 insertions, 116 deletions
diff --git a/include/configs/pcl063_ull.h b/include/configs/pcl063_ull.h deleted file mode 100644 index 650caaa..0000000 --- a/include/configs/pcl063_ull.h +++ /dev/null @@ -1,116 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Board configuration file for Phytec phyBOARD-i.MX6ULL-Segin SBC - * Copyright (C) 2019 Parthiban Nallathambi <parthitce@gmail.com> - * - * Based on include/configs/xpress.h: - * Copyright (C) 2015-2016 Stefan Roese <sr@denx.de> - */ -#ifndef __PCL063_ULL_H -#define __PCL063_ULL_H - -#include <linux/sizes.h> -#include "mx6_common.h" - -/* SPL options */ -#include "imx6_spl.h" - -#define CONFIG_SYS_FSL_USDHC_NUM 2 - -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (16 * SZ_1M) - -/* Environment settings */ -#define CONFIG_ENV_SIZE (0x4000) -#define CONFIG_ENV_OFFSET (0x80000) -#define CONFIG_SYS_REDUNDAND_ENVIRONMENT -#define CONFIG_ENV_OFFSET_REDUND \ - (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) - -/* Environment in SD */ -#define CONFIG_SYS_MMC_ENV_DEV 0 -#define CONFIG_SYS_MMC_ENV_PART 0 -#define MMC_ROOTFS_DEV 0 -#define MMC_ROOTFS_PART 2 - -/* Console configs */ -#define CONFIG_MXC_UART_BASE UART1_BASE - -/* MMC Configs */ - -#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR -#define CONFIG_SUPPORT_EMMC_BOOT - -/* I2C configs */ -#ifdef CONFIG_CMD_I2C -#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ -#define CONFIG_SYS_I2C_SPEED 100000 -#endif - -/* Miscellaneous configurable options */ -#define CONFIG_SYS_MEMTEST_START 0x80000000 -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x10000000) - -#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000 - -/* Physical Memory Map */ -#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR -#define PHYS_SDRAM_SIZE SZ_256M - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE - -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - -/* NAND */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE 0x40000000 - -/* USB Configs */ -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 -#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 - -#define CONFIG_IMX_THERMAL - -#define ENV_MMC \ - "mmcdev=" __stringify(MMC_ROOTFS_DEV) "\0" \ - "mmcpart=" __stringify(MMC_ROOTFS_PART) "\0" \ - "fitpart=1\0" \ - "bootdelay=3\0" \ - "silent=1\0" \ - "optargs=rw rootwait\0" \ - "mmcautodetect=yes\0" \ - "mmcrootfstype=ext4\0" \ - "mmcfit_name=fitImage\0" \ - "mmcloadfit=fatload mmc ${mmcdev}:${fitpart} ${fit_addr} " \ - "${mmcfit_name}\0" \ - "mmcargs=setenv bootargs " \ - "root=/dev/mmcblk${mmcdev}p${mmcpart} ${optargs} " \ - "console=${console} rootfstype=${mmcrootfstype}\0" \ - "mmc_mmc_fit=run mmcloadfit;run mmcargs addcon; bootm ${fit_addr}\0" \ - -/* Default environment */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "fdt_high=0xffffffff\0" \ - "console=ttymxc0,115200n8\0" \ - "addcon=setenv bootargs ${bootargs} console=${console},${baudrate}\0" \ - "fit_addr=0x82000000\0" \ - ENV_MMC - -#define CONFIG_BOOTCOMMAND "run mmc_mmc_fit" - -#define BOOT_TARGET_DEVICES(func) \ - func(MMC, mmc, 0) \ - func(MMC, mmc, 1) \ - func(DHCP, dhcp, na) - -#include <config_distro_bootcmd.h> - -#endif /* __PCL063_ULL_H */ |