diff options
Diffstat (limited to 'include/configs/pengwyn.h')
| -rw-r--r-- | include/configs/pengwyn.h | 170 |
1 files changed, 0 insertions, 170 deletions
diff --git a/include/configs/pengwyn.h b/include/configs/pengwyn.h deleted file mode 100644 index a535d0c..0000000 --- a/include/configs/pengwyn.h +++ /dev/null @@ -1,170 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * pengwyn.h - * - * Copyright (C) 2013 Lothar Felten <lothar.felten@gmail.com> - * - * based on am335x_evm.h, Copyright (C) 2011 Texas Instruments Inc. - */ - -#ifndef __CONFIG_PENGWYN_H -#define __CONFIG_PENGWYN_H - - -#include <configs/ti_am335x_common.h> - -/* Clock Defines */ -#define V_OSCK 24000000 -#define V_SCLK V_OSCK - -/* set env size */ -#define CONFIG_ENV_SIZE 0x4000 - -#ifndef CONFIG_SPL_BUILD -#define CONFIG_EXTRA_ENV_SETTINGS \ - "loadaddr=0x80200000\0" \ - "fdtaddr=0x80F80000\0" \ - "bootpart=0:2\0" \ - "bootdir=/boot\0" \ - "bootfile=zImage\0" \ - "fdtfile=am335x-pengwyn.dtb\0" \ - "console=ttyO0,115200n8\0" \ - "optargs=\0" \ - "mmcdev=0\0" \ - "mmcroot=/dev/mmcblk0p2 ro\0" \ - "mmcrootfstype=ext4 rootwait\0" \ - "rootpath=/export/rootfs\0" \ - "nfsopts=nolock\0" \ - "static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \ - "::off\0" \ - "mmcargs=setenv bootargs console=${console} " \ - "${optargs} " \ - "root=${mmcroot} " \ - "rootfstype=${mmcrootfstype}\0" \ - "netargs=setenv bootargs console=${console} " \ - "${optargs} " \ - "root=/dev/nfs " \ - "nfsroot=${serverip}:${rootpath},${nfsopts} rw " \ - "ip=dhcp\0" \ - "bootenv=uEnv.txt\0" \ - "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ - "importbootenv=echo Importing environment from mmc ...; " \ - "env import -t $loadaddr $filesize\0" \ - "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ - "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ - "mmcloados=run mmcargs; " \ - "bootz ${loadaddr} - ${fdtaddr};\0" \ - "mmcboot=mmc dev ${mmcdev}; " \ - "if mmc rescan; then " \ - "echo SD/MMC found on device ${mmcdev};" \ - "if run loadbootenv; then " \ - "echo Loaded environment from ${bootenv};" \ - "run importbootenv;" \ - "fi;" \ - "if test -n $uenvcmd; then " \ - "echo Running uenvcmd ...;" \ - "run uenvcmd;" \ - "fi;" \ - "if run loadimage; then " \ - "run loadfdt;" \ - "run mmcloados;" \ - "fi;" \ - "fi;\0" \ - "netboot=echo Booting from network ...; " \ - "setenv autoload no; " \ - "dhcp; " \ - "tftp ${loadaddr} ${bootfile}; " \ - "tftp ${fdtaddr} ${fdtfile}; " \ - "run netargs; " \ - "bootz ${loadaddr} - ${fdtaddr}\0" \ - "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \ - "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ - "nandargs=setenv bootargs console=${console} " \ - "${optargs} " \ - "root=${nandroot} " \ - "rootfstype=${nandrootfstype}\0" \ - "nandroot=ubi0:rootfs rw ubi.mtd=7,2048\0" \ - "nandrootfstype=ubifs rootwait=1\0" \ - "nandboot=echo Booting from nand ...; " \ - "run nandargs; " \ - "nand read ${fdtaddr} u-boot-spl-os; " \ - "nand read ${loadaddr} kernel; " \ - "bootz ${loadaddr} - ${fdtaddr}\0" -#endif - -#define CONFIG_BOOTCOMMAND \ - "run mmcboot;" \ - "run nandboot;" - -/* NS16550 Configuration: primary UART via FTDI */ -#define CONFIG_SYS_NS16550_COM1 0x44e09000 - -/* I2C Configuration */ -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_ENV_EEPROM_IS_ON_I2C -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 - -/* SPL */ - -/* NAND support */ - -/* NAND Configuration. */ -#define CONFIG_SYS_NAND_5_ADDR_CYCLE -#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ - CONFIG_SYS_NAND_PAGE_SIZE) -#define CONFIG_SYS_NAND_PAGE_SIZE 4096 -#define CONFIG_SYS_NAND_OOBSIZE 224 -#define CONFIG_SYS_NAND_ONFI_DETECTION -#define CONFIG_SYS_NAND_BLOCK_SIZE (128*4096) -#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS -#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17,\ - 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33,\ - 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49,\ - 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65,\ - 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81,\ - 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97,\ - 98, 99, 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, 110, 111, 112, 113,\ - 114, 115, 116, 117, 118, 119, 120, 121, 122, 123, 124, 125, 126, 127, 128, 129, 130, 131, 132, 133,\ - 134, 135, 136, 137, 138, 139, 140, 141, 142, 143, 144, 145, 146, 147, 148, 149, 150, 151, 152, 153,\ - 154, 155, 156, 157, 158, 159, 160, 161, 162, 163, 164, 165, 166, 167, 168, 169, 170, 171, 172, 173,\ - 174, 175, 176, 177, 178, 179, 180, 181, 182, 183, 184, 185, 186, 187, 188, 189, 190, 191, 192, 193,\ - 194, 195, 196, 197, 198, 199, 200, 201, 202, 203, 204, 205, 206, 207, 208, 209} - -#define CONFIG_SYS_NAND_ECCSIZE 512 -#define CONFIG_SYS_NAND_ECCBYTES 26 -#define CONFIG_SYS_NAND_ECCSTEPS 8 -#define CONFIG_SYS_NAND_ECCTOTAL (CONFIG_SYS_NAND_ECCBYTES * \ - CONFIG_SYS_NAND_ECCSTEPS) -#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH16_CODE_HW -/* END NAND Configuration. */ - -#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE -/* #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 */ -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x200000 - -/* Size must be a multiple of Nand erase size (524288 b) */ -#define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */ -#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ -/* NAND: SPL falcon mode configs */ -#ifdef CONFIG_SPL_OS_BOOT -#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 -#endif - -/* - * USB configuration. We enable MUSB support, both for host and for - * gadget. We set USB0 as peripheral and USB1 as host, based on the - * board schematic and physical port wired to each. Then for host we - * add mass storage support. - */ -#define CONFIG_AM335X_USB0 -#define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL -#define CONFIG_AM335X_USB1 -#define CONFIG_AM335X_USB1_MODE MUSB_HOST - -/* Network */ -#define CONFIG_PHY_RESET 1 -#define CONFIG_PHY_NATSEMI -#define CONFIG_PHY_REALTEK - -#endif /* ! __CONFIG_PENGWYN_H */ |