diff options
Diffstat (limited to 'include/configs/pico-imx6.h')
| -rw-r--r-- | include/configs/pico-imx6.h | 164 |
1 files changed, 0 insertions, 164 deletions
diff --git a/include/configs/pico-imx6.h b/include/configs/pico-imx6.h deleted file mode 100644 index 5bbb9ea..0000000 --- a/include/configs/pico-imx6.h +++ /dev/null @@ -1,164 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2013 Freescale Semiconductor, Inc. - * - * Configuration settings for the pico-imx6 board. - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include "mx6_common.h" - -#include "imx6_spl.h" - -#ifdef CONFIG_SPL_OS_BOOT -/* Falcon Mode */ -#define CONFIG_SPL_FS_LOAD_ARGS_NAME "args" -#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage" -#define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000 - -/* Falcon Mode - MMC support: args@1MB kernel@2MB */ -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x800 /* 1MB */ -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512) -#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000 /* 2MB */ -#endif - -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (35 * SZ_1M) /* Increase due to DFU */ - -#define CONFIG_MXC_UART -#define CONFIG_MXC_UART_BASE UART1_BASE - -#define CONFIG_SYS_MEMTEST_START 0x10000000 -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M) - -/* MMC Configuration */ -#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC3_BASE_ADDR -#define CONFIG_SUPPORT_EMMC_BOOT -#define CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE - -/* USB Configs */ -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 - -#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M -#define DFU_DEFAULT_POLL_TIMEOUT 300 - -#define CONFIG_DFU_ENV_SETTINGS \ - "dfu_alt_info=" \ - "spl raw 0x2 0x400;" \ - "u-boot raw 0x8a 0x1000;" \ - "/boot/zImage ext4 0 1;" \ - "rootfs part 0 1\0" \ - -#define BOOTMENU_ENV \ - "bootmenu_0=Boot using PICO-Hobbit baseboard=" \ - "setenv baseboard hobbit; saveenv; run base_boot\0" \ - "bootmenu_1=Boot using PICO-Pi baseboard=" \ - "setenv baseboard pi; saveenv; run base_boot\0" \ - "bootmenu_2=Boot using PICO-Dwarf baseboard=" \ - "setenv baseboard dwarf; saveenv; run base_boot\0" \ - "bootmenu_3=Boot using PICO-Nymph baseboard=" \ - "setenv baseboard nymph; saveenv; run base_boot\0" \ - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "console=ttymxc0\0" \ - "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \ - BOOTMENU_ENV \ - "fdt_high=0xffffffff\0" \ - "initrd_high=0xffffffff\0" \ - "fdt_addr_r=0x18000000\0" \ - "fdt_addr=0x18000000\0" \ - "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ - CONFIG_DFU_ENV_SETTINGS \ - "finduuid=part uuid mmc 0:1 uuid\0" \ - "findfdt="\ - "if test $baseboard = hobbit && test $board_rev = MX6Q ; then " \ - "setenv fdtfile imx6q-pico-hobbit.dtb; fi; " \ - "if test $baseboard = pi && test $board_rev = MX6Q ; then " \ - "setenv fdtfile imx6q-pico-pi.dtb; fi; " \ - "if test $baseboard = dwarf && test $board_rev = MX6Q ; then " \ - "setenv fdtfile imx6q-pico-dwarf.dtb; fi; " \ - "if test $baseboard = nymph && test $board_rev = MX6Q ; then " \ - "setenv fdtfile imx6q-pico-nymph.dtb; fi; " \ - "if test $baseboard = hobbit && test $board_rev = MX6DL ; then " \ - "setenv fdtfile imx6dl-pico-hobbit.dtb; fi; " \ - "if test $baseboard = pi && test $board_rev = MX6DL ; then " \ - "setenv fdtfile imx6dl-pico-pi.dtb; fi; " \ - "if test $baseboard = dwarf && test $board_rev = MX6DL ; then " \ - "setenv fdtfile imx6dl-pico-dwarf.dtb; fi; " \ - "if test $baseboard = nymph && test $board_rev = MX6DL ; then " \ - "setenv fdtfile imx6dl-pico-nymph.dtb; fi; " \ - "if test $fdtfile = ask; then " \ - "echo WARNING: Could not determine dtb to use; fi; \0" \ - "default_boot=" \ - "if test $baseboard = ask ; then " \ - "bootmenu -1; " \ - "else " \ - "run base_boot;" \ - "fi; \0" \ - "base_boot=run findfdt; run finduuid; run distro_bootcmd\0" \ - "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ - "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ - "ramdisk_addr_r=0x13000000\0" \ - "ramdiskaddr=0x13000000\0" \ - "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \ - BOOTENV - -#define BOOT_TARGET_DEVICES(func) \ - func(MMC, mmc, 0) \ - func(USB, usb, 0) - -#include <config_distro_bootcmd.h> - -/* Physical Memory Map */ -#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE - -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - -/* Environment organization */ -#define CONFIG_ENV_SIZE (8 * 1024) - -/* Environment starts at 768k = 768 * 1024 = 786432 */ -#define CONFIG_ENV_OFFSET 786432 -/* - * Detect overlap between U-Boot image and environment area in build-time - * - * CONFIG_BOARD_SIZE_LIMIT = CONFIG_ENV_OFFSET - u-boot.img offset - * CONFIG_BOARD_SIZE_LIMIT = 768k - 69k = 699k = 715776 - * - * Currently CONFIG_BOARD_SIZE_LIMIT does not handle expressions, so - * write the direct value here - */ -#define CONFIG_BOARD_SIZE_LIMIT 715776 -#define CONFIG_SYS_MMC_ENV_DEV 0 - -/* Ethernet Configuration */ -#define CONFIG_FEC_MXC -#define CONFIG_MII -#define IMX_FEC_BASE ENET_BASE_ADDR -#define CONFIG_FEC_XCV_TYPE RGMII -#define CONFIG_ETHPRIME "FEC" -#define CONFIG_FEC_MXC_PHYADDR 1 -#define CONFIG_PHYLIB -#define CONFIG_PHY_ATHEROS - -/* Framebuffer */ -#define CONFIG_VIDEO_BMP_RLE8 -#define CONFIG_SPLASH_SCREEN -#define CONFIG_SPLASH_SCREEN_ALIGN -#define CONFIG_BMP_16BPP -#define CONFIG_VIDEO_LOGO -#define CONFIG_VIDEO_BMP_LOGO -#define CONFIG_IMX_HDMI -#define CONFIG_IMX_VIDEO_SKIP - -#endif /* __CONFIG_H * */ |