diff options
Diffstat (limited to 'include/configs/picosam9g45.h')
| -rw-r--r-- | include/configs/picosam9g45.h | 129 |
1 files changed, 0 insertions, 129 deletions
diff --git a/include/configs/picosam9g45.h b/include/configs/picosam9g45.h deleted file mode 100644 index ad41d16..0000000 --- a/include/configs/picosam9g45.h +++ /dev/null @@ -1,129 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Configuration settings for the mini-box PICOSAM9G45 board. - * (C) Copyright 2015 Inter Act B.V. - * - * Based on: - * U-Boot file: include/configs/at91sam9m10g45ek.h - * (C) Copyright 2007-2008 - * Stelian Pop <stelian@popies.net> - * Lead Tech Design <www.leadtechdesign.com> - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include <asm/hardware.h> - -#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ - -/* ARM asynchronous clock */ -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 -#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ - -#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG -#define CONFIG_SKIP_LOWLEVEL_INIT - -/* general purpose I/O */ -#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ -#define CONFIG_AT91_GPIO -#define CONFIG_AT91_GPIO_PULLUP 1 /* keep pullups on peripheral pins */ - -/* serial console */ -#define CONFIG_ATMEL_USART -#define CONFIG_USART_BASE ATMEL_BASE_DBGU -#define CONFIG_USART_ID ATMEL_ID_SYS - -/* LCD */ -#define LCD_BPP LCD_COLOR8 -#define CONFIG_LCD_LOGO -#undef LCD_TEST_PATTERN -#define CONFIG_LCD_INFO -#define CONFIG_LCD_INFO_BELOW_LOGO -#define CONFIG_ATMEL_LCD -#define CONFIG_ATMEL_LCD_RGB565 -/* board specific(not enough SRAM) */ -#define CONFIG_AT91SAM9G45_LCD_BASE 0x23E00000 - -/* LED */ -#define CONFIG_AT91_LED -#define CONFIG_GREEN_LED AT91_PIN_PD31 /* this is the user1 led */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE - -/* - * Command line configuration. - */ - -/* SDRAM */ -#define PHYS_SDRAM_1 ATMEL_BASE_CS1 /* on DDRSDRC1 */ -#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */ -#define PHYS_SDRAM_2 ATMEL_BASE_CS6 /* on DDRSDRC0 */ -#define PHYS_SDRAM_2_SIZE 0x08000000 /* 128 MB */ -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 - -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE) - -/* MMC */ - -#ifdef CONFIG_CMD_MMC -#define CONFIG_GENERIC_ATMEL_MCI -#endif - -/* Ethernet */ -#define CONFIG_MACB -#define CONFIG_RMII -#define CONFIG_NET_RETRY_COUNT 20 -#define CONFIG_RESET_PHY_R -#define CONFIG_AT91_WANTS_COMMON_PHY - -#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ - -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_MEMTEST_END 0x23e00000 - -#ifdef CONFIG_SYS_USE_MMC -/* bootstrap + u-boot + env + linux in mmc */ -#define CONFIG_ENV_SIZE 0x4000 - -#define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x21000000 dtb; " \ - "fatload mmc 0:1 0x22000000 zImage; " \ - "bootz 0x22000000 - 0x21000000" -#endif - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) - -/* Defines for SPL */ -#define CONFIG_SPL_MAX_SIZE 0x010000 -#define CONFIG_SPL_STACK 0x310000 - -#define CONFIG_SYS_MONITOR_LEN 0x80000 - -#ifdef CONFIG_SYS_USE_MMC - -#define CONFIG_SPL_BSS_START_ADDR 0x20000000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x00080000 -#define CONFIG_SYS_SPL_MALLOC_START 0x20080000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00080000 - -#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 -#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" - -#define CONFIG_SPL_ATMEL_SIZE -#define CONFIG_SYS_MASTER_CLOCK 132096000 -#define CONFIG_SYS_AT91_PLLA 0x20c73f03 -#define CONFIG_SYS_MCKR 0x1301 -#define CONFIG_SYS_MCKR_CSS 0x1302 - -#endif -#endif |