diff options
Diffstat (limited to 'include/configs/pm9261.h')
| -rw-r--r-- | include/configs/pm9261.h | 270 |
1 files changed, 0 insertions, 270 deletions
diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h deleted file mode 100644 index 99ca1f7..0000000 --- a/include/configs/pm9261.h +++ /dev/null @@ -1,270 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2007-2008 - * Stelian Pop <stelian@popies.net> - * Lead Tech Design <www.leadtechdesign.com> - * Ilko Iliev <www.ronetix.at> - * - * Configuation settings for the RONETIX PM9261 board. - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * SoC must be defined first, before hardware.h is included. - * In this case SoC is defined in boards.cfg. - */ - -#include <asm/hardware.h> -/* ARM asynchronous clock */ - -#define MASTER_PLL_DIV 15 -#define MASTER_PLL_MUL 162 -#define MAIN_PLL_DIV 2 -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ -#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 - -#define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9261" - -#define CONFIG_MACH_TYPE MACH_TYPE_PM9261 - -/* clocks */ -/* CKGR_MOR - enable main osc. */ -#define CONFIG_SYS_MOR_VAL \ - (AT91_PMC_MOR_MOSCEN | \ - (255 << 8)) /* Main Oscillator Start-up Time */ -#define CONFIG_SYS_PLLAR_VAL \ - (AT91_PMC_PLLAR_29 | /* Bit 29 must be 1 when prog */ \ - AT91_PMC_PLLXR_OUT(3) | \ - ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV)) - -/* PCK/2 = MCK Master Clock from PLLA */ -#define CONFIG_SYS_MCKR1_VAL \ - (AT91_PMC_MCKR_CSS_SLOW | \ - AT91_PMC_MCKR_PRES_1 | \ - AT91_PMC_MCKR_MDIV_2) - -/* PCK/2 = MCK Master Clock from PLLA */ -#define CONFIG_SYS_MCKR2_VAL \ - (AT91_PMC_MCKR_CSS_PLLA | \ - AT91_PMC_MCKR_PRES_1 | \ - AT91_PMC_MCKR_MDIV_2) - -/* define PDC[31:16] as DATA[31:16] */ -#define CONFIG_SYS_PIOC_PDR_VAL1 0xFFFF0000 -/* no pull-up for D[31:16] */ -#define CONFIG_SYS_PIOC_PPUDR_VAL 0xFFFF0000 - -/* EBI_CSA, no pull-ups for D[15:0], CS1 SDRAM, CS3 NAND Flash */ -#define CONFIG_SYS_MATRIX_EBICSA_VAL \ - (AT91_MATRIX_CSA_DBPUC | AT91_MATRIX_CSA_EBI_CS1A) - -/* SDRAM */ -/* SDRAMC_MR Mode register */ -#define CONFIG_SYS_SDRC_MR_VAL1 AT91_SDRAMC_MODE_NORMAL -/* SDRAMC_TR - Refresh Timer register */ -#define CONFIG_SYS_SDRC_TR_VAL1 0x13C -/* SDRAMC_CR - Configuration register*/ -#define CONFIG_SYS_SDRC_CR_VAL \ - (AT91_SDRAMC_NC_9 | \ - AT91_SDRAMC_NR_13 | \ - AT91_SDRAMC_NB_4 | \ - AT91_SDRAMC_CAS_3 | \ - AT91_SDRAMC_DBW_32 | \ - (1 << 8) | /* Write Recovery Delay */ \ - (7 << 12) | /* Row Cycle Delay */ \ - (3 << 16) | /* Row Precharge Delay */ \ - (2 << 20) | /* Row to Column Delay */ \ - (5 << 24) | /* Active to Precharge Delay */ \ - (1 << 28)) /* Exit Self Refresh to Active Delay */ - -/* Memory Device Register -> SDRAM */ -#define CONFIG_SYS_SDRC_MDR_VAL AT91_SDRAMC_MD_SDRAM -#define CONFIG_SYS_SDRC_MR_VAL2 AT91_SDRAMC_MODE_PRECHARGE -#define CONFIG_SYS_SDRAM_VAL1 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRC_MR_VAL3 AT91_SDRAMC_MODE_REFRESH -#define CONFIG_SYS_SDRAM_VAL2 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRAM_VAL3 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRAM_VAL4 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRAM_VAL5 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRAM_VAL6 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRAM_VAL7 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRAM_VAL8 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRAM_VAL9 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRC_MR_VAL4 AT91_SDRAMC_MODE_LMR -#define CONFIG_SYS_SDRAM_VAL10 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRC_MR_VAL5 AT91_SDRAMC_MODE_NORMAL -#define CONFIG_SYS_SDRAM_VAL11 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRC_TR_VAL2 1200 /* SDRAM_TR */ -#define CONFIG_SYS_SDRAM_VAL12 0 /* SDRAM_BASE */ - -/* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */ -#define CONFIG_SYS_SMC0_SETUP0_VAL \ - (AT91_SMC_SETUP_NWE(10) | AT91_SMC_SETUP_NCS_WR(10) | \ - AT91_SMC_SETUP_NRD(10) | AT91_SMC_SETUP_NCS_RD(10)) -#define CONFIG_SYS_SMC0_PULSE0_VAL \ - (AT91_SMC_PULSE_NWE(11) | AT91_SMC_PULSE_NCS_WR(11) | \ - AT91_SMC_PULSE_NRD(11) | AT91_SMC_PULSE_NCS_RD(11)) -#define CONFIG_SYS_SMC0_CYCLE0_VAL \ - (AT91_SMC_CYCLE_NWE(22) | AT91_SMC_CYCLE_NRD(22)) -#define CONFIG_SYS_SMC0_MODE0_VAL \ - (AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | \ - AT91_SMC_MODE_DBW_16 | \ - AT91_SMC_MODE_TDF | \ - AT91_SMC_MODE_TDF_CYCLE(6)) - -/* user reset enable */ -#define CONFIG_SYS_RSTC_RMR_VAL \ - (AT91_RSTC_KEY | \ - AT91_RSTC_CR_PROCRST | \ - AT91_RSTC_MR_ERSTL(1) | \ - AT91_RSTC_MR_ERSTL(2)) - -/* Disable Watchdog */ -#define CONFIG_SYS_WDTC_WDMR_VAL \ - (AT91_WDT_MR_WDIDLEHLT | AT91_WDT_MR_WDDBGHLT | \ - AT91_WDT_MR_WDV(0xfff) | \ - AT91_WDT_MR_WDDIS | \ - AT91_WDT_MR_WDD(0xfff)) - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - -#undef CONFIG_SKIP_LOWLEVEL_INIT - -/* - * Hardware drivers - */ - -/* LCD */ -#define LCD_BPP LCD_COLOR8 -#define CONFIG_LCD_LOGO 1 -#undef LCD_TEST_PATTERN -#define CONFIG_LCD_INFO 1 -#define CONFIG_LCD_INFO_BELOW_LOGO 1 -#define CONFIG_ATMEL_LCD 1 -#define CONFIG_ATMEL_LCD_BGR555 1 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE 1 - -/* SDRAM */ -#define PHYS_SDRAM 0x20000000 -#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */ - -/* NAND flash */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE 0x40000000 -#define CONFIG_SYS_NAND_DBW_8 1 -/* our ALE is AD22 */ -#define CONFIG_SYS_NAND_MASK_ALE (1 << 22) -/* our CLE is AD21 */ -#define CONFIG_SYS_NAND_MASK_CLE (1 << 21) -#define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PC(14) -#define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PA(16) - -/* NOR flash */ -#define PHYS_FLASH_1 0x10000000 -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 -#define CONFIG_SYS_MAX_FLASH_SECT 256 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 - -/* Ethernet */ -#define CONFIG_DRIVER_DM9000 1 -#define CONFIG_DM9000_BASE 0x30000000 -#define DM9000_IO CONFIG_DM9000_BASE -#define DM9000_DATA (CONFIG_DM9000_BASE + 4) -#define CONFIG_DM9000_USE_16BIT 1 -#define CONFIG_NET_RETRY_COUNT 20 -#define CONFIG_RESET_PHY_R 1 - -/* USB */ -#define CONFIG_USB_ATMEL -#define CONFIG_USB_ATMEL_CLK_SEL_PLLB -#define CONFIG_USB_OHCI_NEW 1 -#define CONFIG_SYS_USB_OHCI_CPU_INIT 1 -#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9261" -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 - -#define CONFIG_SYS_LOAD_ADDR 0x22000000 - -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM -#define CONFIG_SYS_MEMTEST_END 0x23e00000 - -#undef CONFIG_SYS_USE_DATAFLASH_CS0 -#undef CONFIG_SYS_USE_NANDFLASH -#define CONFIG_SYS_USE_FLASH 1 - -#ifdef CONFIG_SYS_USE_DATAFLASH_CS0 - -/* bootstrap + u-boot + env + linux in dataflash on CS0 */ -#define CONFIG_ENV_OFFSET 0x4200 -#define CONFIG_ENV_SIZE 0x4200 -#define CONFIG_ENV_SECT_SIZE 0x210 -#define CONFIG_BOOTCOMMAND "sf probe 0; " \ - "sf read 0x22000000 0x84000 0x210000; " \ - "bootm 0x22000000" - -#elif defined(CONFIG_SYS_USE_NANDFLASH) /* CONFIG_SYS_USE_NANDFLASH */ - -/* bootstrap + u-boot + env + linux in nandflash */ -#define CONFIG_ENV_OFFSET 0x60000 -#define CONFIG_ENV_OFFSET_REDUND 0x80000 -#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ -#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm" - -#elif defined (CONFIG_SYS_USE_FLASH) - -#define CONFIG_ENV_OFFSET 0x40000 -#define CONFIG_ENV_SECT_SIZE 0x10000 -#define CONFIG_ENV_SIZE 0x10000 -#define CONFIG_ENV_OVERWRITE 1 - -/* JFFS Partition offset set */ -#define CONFIG_SYS_JFFS2_FIRST_BANK 0 -#define CONFIG_SYS_JFFS2_NUM_BANKS 1 - -/* 512k reserved for u-boot */ -#define CONFIG_SYS_JFFS2_FIRST_SECTOR 11 - -#define CONFIG_BOOTCOMMAND "run flashboot" - -#define CONFIG_CON_ROT "fbcon=rotate:3 " - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \ - "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ - "partition=nand0,0\0" \ - "ramargs=setenv bootargs $(bootargs) $(mtdparts)\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - CONFIG_CON_ROT \ - "nfsroot=$(serverip):$(rootpath) $(mtdparts)\0" \ - "addip=setenv bootargs $(bootargs) " \ - "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"\ - ":$(hostname):eth0:off\0" \ - "ramboot=tftpboot 0x22000000 vmImage;" \ - "run ramargs;run addip;bootm 22000000\0" \ - "nfsboot=tftpboot 0x22000000 vmImage;" \ - "run nfsargs;run addip;bootm 22000000\0" \ - "flashboot=run ramargs;run addip;bootm 0x10050000\0" \ - "" -#else -#error "Undefined memory device" -#endif - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN \ - ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000) - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - \ - GENERATED_GBL_DATA_SIZE) - -#endif |