diff options
Diffstat (limited to 'include/configs/r7780mp.h')
| -rw-r--r-- | include/configs/r7780mp.h | 116 |
1 files changed, 0 insertions, 116 deletions
diff --git a/include/configs/r7780mp.h b/include/configs/r7780mp.h deleted file mode 100644 index 6ea7f38..0000000 --- a/include/configs/r7780mp.h +++ /dev/null @@ -1,116 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Configuation settings for the Renesas R7780MP board - * - * Copyright (C) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> - * Copyright (C) 2008 Yusuke Goda <goda.yusuke@renesas.com> - */ - -#ifndef __R7780RP_H -#define __R7780RP_H - -#define CONFIG_CPU_SH7780 1 -#define CONFIG_R7780MP 1 -#define CONFIG_SYS_R7780MP_OLD_FLASH 1 -#define __LITTLE_ENDIAN__ 1 - -#define CONFIG_DISPLAY_BOARDINFO - -#define CONFIG_CONS_SCIF0 1 - -#define CONFIG_ENV_OVERWRITE 1 - -#define CONFIG_SYS_SDRAM_BASE (0x08000000) -#define CONFIG_SYS_SDRAM_SIZE (128 * 1024 * 1024) - -#define CONFIG_SYS_PBSIZE 256 - -#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE) -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_TEXT_BASE - 0x100000) - -/* Flash board support */ -#define CONFIG_SYS_FLASH_BASE (0xA0000000) -#ifdef CONFIG_SYS_R7780MP_OLD_FLASH -/* NOR Flash (S29PL127J60TFI130) */ -# define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_32BIT -# define CONFIG_SYS_MAX_FLASH_BANKS (2) -# define CONFIG_SYS_MAX_FLASH_SECT 270 -# define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE,\ - CONFIG_SYS_FLASH_BASE + 0x100000,\ - CONFIG_SYS_FLASH_BASE + 0x400000,\ - CONFIG_SYS_FLASH_BASE + 0x700000, } -#else /* CONFIG_SYS_R7780MP_OLD_FLASH */ -/* NOR Flash (Spantion S29GL256P) */ -# define CONFIG_SYS_MAX_FLASH_BANKS (1) -# define CONFIG_SYS_MAX_FLASH_SECT 256 -# define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } -#endif /* CONFIG_SYS_R7780MP_OLD_FLASH */ - -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 4 * 1024 * 1024) -/* Address of u-boot image in Flash */ -#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE) -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) -/* Size of DRAM reserved for malloc() use */ -#define CONFIG_SYS_MALLOC_LEN (1204 * 1024) - -#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) -#define CONFIG_SYS_RX_ETH_BUFFER (8) - -#undef CONFIG_SYS_FLASH_CFI_BROKEN_TABLE -#undef CONFIG_SYS_FLASH_QUIET_TEST -/* print 'E' for empty sector on flinfo */ -#define CONFIG_SYS_FLASH_EMPTY_INFO - -#define CONFIG_ENV_SECT_SIZE (256 * 1024) -#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 - -/* Board Clock */ -#define CONFIG_SYS_CLK_FREQ 33333333 -#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ - -/* PCI Controller */ -#if defined(CONFIG_CMD_PCI) -#define CONFIG_SH4_PCI -#define CONFIG_SH7780_PCI -#define CONFIG_SH7780_PCI_LSR 0x07f00001 -#define CONFIG_SH7780_PCI_LAR CONFIG_SYS_SDRAM_SIZE -#define CONFIG_SH7780_PCI_BAR CONFIG_SYS_SDRAM_SIZE -#define CONFIG_PCI_SCAN_SHOW 1 -#define __mem_pci - -#define CONFIG_PCI_MEM_BUS 0xFD000000 /* Memory space base addr */ -#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS -#define CONFIG_PCI_MEM_SIZE 0x01000000 /* Size of Memory window */ - -#define CONFIG_PCI_IO_BUS 0xFE200000 /* IO space base address */ -#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS -#define CONFIG_PCI_IO_SIZE 0x00200000 /* Size of IO window */ -#define CONFIG_PCI_SYS_PHYS CONFIG_SYS_SDRAM_BASE -#define CONFIG_PCI_SYS_BUS CONFIG_SYS_SDRAM_BASE -#define CONFIG_PCI_SYS_SIZE CONFIG_SYS_SDRAM_SIZE -#endif /* CONFIG_CMD_PCI */ - -#if defined(CONFIG_CMD_NET) -/* AX88796L Support(NE2000 base chip) */ -#define CONFIG_DRIVER_AX88796L -#define CONFIG_DRIVER_NE2000_BASE 0xA4100000 -#endif - -/* Compact flash Support */ -#if defined(CONFIG_IDE) -#define CONFIG_IDE_RESET 1 -#define CONFIG_SYS_PIO_MODE 1 -#define CONFIG_SYS_IDE_MAXBUS 1 /* IDE bus */ -#define CONFIG_SYS_IDE_MAXDEVICE 1 -#define CONFIG_SYS_ATA_BASE_ADDR 0xb4000000 -#define CONFIG_SYS_ATA_STRIDE 2 /* 1bit shift */ -#define CONFIG_SYS_ATA_DATA_OFFSET 0x1000 /* data reg offset */ -#define CONFIG_SYS_ATA_REG_OFFSET 0x1000 /* reg offset */ -#define CONFIG_SYS_ATA_ALT_OFFSET 0x800 /* alternate register offset */ -#define CONFIG_IDE_SWAP_IO -#endif /* CONFIG_IDE */ - -#endif /* __R7780RP_H */ |