diff options
Diffstat (limited to 'include/configs/rut.h')
| -rw-r--r-- | include/configs/rut.h | 124 |
1 files changed, 0 insertions, 124 deletions
diff --git a/include/configs/rut.h b/include/configs/rut.h deleted file mode 100644 index 296bdc2..0000000 --- a/include/configs/rut.h +++ /dev/null @@ -1,124 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * siemens rut - * (C) Copyright 2013 Siemens Schweiz AG - * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. - * - * Based on: - * U-Boot file:/include/configs/am335x_evm.h - * - * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ - */ - -#ifndef __CONFIG_RUT_H -#define __CONFIG_RUT_H - -#define CONFIG_SIEMENS_MACH_TYPE MACH_TYPE_RUT - -#include "siemens-am33x-common.h" - -#define RUT_IOCTRL_VAL 0x18b -#define DDR_PLL_FREQ 303 - - /* Physical Memory Map */ -#define CONFIG_MAX_RAM_BANK_SIZE (256 << 20) /* 256 MiB */ - -/* I2C Configuration */ -#define CONFIG_SYS_I2C_SPEED 100000 - -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 /* 64 byte pages */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* take up to 10 msec */ - -#define CONFIG_PHY_NATSEMI - -#define CONFIG_FACTORYSET - -/* Watchdog */ -#define WATCHDOG_TRIGGER_GPIO 14 - -#ifndef CONFIG_SPL_BUILD - -/* Use common default */ - -/* Default env settings */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "hostname=rut\0" \ - "ubi_off=2048\0"\ - "nand_img_size=0x500000\0" \ - "splashpos=m,m\0" \ - "optargs=fixrtc --no-log consoleblank=0 \0" \ - CONFIG_ENV_SETTINGS_V1 \ - CONFIG_ENV_SETTINGS_NAND_V1 \ - "mmc_dev=0\0" \ - "mmc_root=/dev/mmcblk0p2 rw\0" \ - "mmc_root_fs_type=ext4 rootwait\0" \ - "mmc_load_uimage=" \ - "mmc rescan; " \ - "setenv bootfile uImage;" \ - "fatload mmc ${mmc_dev} ${kloadaddr} ${bootfile}\0" \ - "loadbootenv=fatload mmc ${mmc_dev} ${loadaddr} ${bootenv}\0" \ - "importbootenv=echo Importing environment from mmc ...; " \ - "env import -t $loadaddr $filesize\0" \ - "mmc_args=run bootargs_defaults;" \ - "mtdparts default;" \ - "setenv bootargs ${bootargs} " \ - "root=${mmc_root} ${mtdparts}" \ - "rootfstype=${mmc_root_fs_type} ip=${ip_method} " \ - "eth=${ethaddr} " \ - "\0" \ - "mmc_boot=run mmc_args; " \ - "run mmc_load_uimage; " \ - "bootm ${kloadaddr}\0" \ - "" - -#ifndef CONFIG_RESTORE_FLASH -/* set to negative value for no autoboot */ - -#define CONFIG_BOOTCOMMAND \ - "if mmc rescan; then " \ - "echo SD/MMC found on device ${mmc_dev};" \ - "if run loadbootenv; then " \ - "echo Loaded environment from ${bootenv};" \ - "run importbootenv;" \ - "fi;" \ - "if test -n $uenvcmd; then " \ - "echo Running uenvcmd ...;" \ - "run uenvcmd;" \ - "fi;" \ - "if run mmc_load_uimage; then " \ - "run mmc_args;" \ - "bootm ${kloadaddr};" \ - "fi;" \ - "fi;" \ - "run nand_boot;" \ - "reset;" - -#else - -#define CONFIG_BOOTCOMMAND \ - "setenv autoload no; " \ - "dhcp; " \ - "if tftp 80000000 debrick.scr; then " \ - "source 80000000; " \ - "fi" -#endif - -#endif /* CONFIG_SPL_BUILD */ - -#if defined(CONFIG_VIDEO) -#define CONFIG_VIDEO_DA8XX -#define CONFIG_SPLASH_SCREEN -#define CONFIG_SPLASH_SCREEN_ALIGN -#define CONFIG_VIDEO_LOGO -#define CONFIG_VIDEO_BMP_RLE8 -#define CONFIG_VIDEO_BMP_LOGO -#define DA8XX_LCD_CNTL_BASE LCD_CNTL_BASE - -#define BOARD_LCD_RESET 115 /* Bank 3 pin 19 */ -#define CONFIG_FORMIKE -#define DISPL_PLL_SPREAD_SPECTRUM -#endif - -#endif /* ! __CONFIG_RUT_H */ |