diff options
Diffstat (limited to 'include/configs/s32v234evb.h')
| -rw-r--r-- | include/configs/s32v234evb.h | 189 |
1 files changed, 0 insertions, 189 deletions
diff --git a/include/configs/s32v234evb.h b/include/configs/s32v234evb.h deleted file mode 100644 index cc6d920..0000000 --- a/include/configs/s32v234evb.h +++ /dev/null @@ -1,189 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2015-2016 Freescale Semiconductor, Inc. - * - * Configuration settings for the Freescale S32V234 EVB board. - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include <asm/arch/imx-regs.h> - -#define CONFIG_S32V234 - -/* Config GIC */ -#define CONFIG_GICV2 -#define GICD_BASE 0x7D001000 -#define GICC_BASE 0x7D002000 - -#define CONFIG_REMAKE_ELF -#undef CONFIG_RUN_FROM_IRAM_ONLY - -#define CONFIG_RUN_FROM_DDR1 -#undef CONFIG_RUN_FROM_DDR0 - -/* Run by default from DDR1 */ -#ifdef CONFIG_RUN_FROM_DDR0 -#define DDR_BASE_ADDR 0x80000000 -#else -#define DDR_BASE_ADDR 0xC0000000 -#endif - -#define CONFIG_MACH_TYPE 4146 - -#define CONFIG_SKIP_LOWLEVEL_INIT - -/* Config CACHE */ -#define CONFIG_CMD_CACHE - -#define CONFIG_SYS_FULL_VA - -/* Enable passing of ATAGs */ -#define CONFIG_CMDLINE_TAG - -/* SMP Spin Table Definitions */ -#define CPU_RELEASE_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) - -/* Generic Timer Definitions */ -#define COUNTER_FREQUENCY (1000000000) /* 1000MHz */ -#define CONFIG_SYS_FSL_ERRATUM_A008585 - -/* Size of malloc() pool */ -#ifdef CONFIG_RUN_FROM_IRAM_ONLY -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1 * 1024 * 1024) -#else -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) -#endif - -#define LINFLEXUART_BASE LINFLEXD0_BASE_ADDR - -#define CONFIG_DEBUG_UART_LINFLEXUART -#define CONFIG_DEBUG_UART_BASE LINFLEXUART_BASE - -/* Allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_SYS_UART_PORT (1) - -#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC_BASE_ADDR -#define CONFIG_SYS_FSL_ESDHC_NUM 1 - -#define CONFIG_CMD_MMC -/* #define CONFIG_CMD_EXT2 EXT2 Support */ - -#if 0 - -/* Ethernet config */ -#define CONFIG_CMD_MII -#define CONFIG_FEC_MXC -#define IMX_FEC_BASE ENET_BASE_ADDR -#define CONFIG_FEC_XCV_TYPE RMII -#define CONFIG_FEC_MXC_PHYADDR 0 -#endif - -#if 0 /* Disable until the FLASH will be implemented */ -#define CONFIG_SYS_USE_NAND -#endif - -#ifdef CONFIG_SYS_USE_NAND -/* Nand Flash Configs */ -#define CONFIG_JFFS2_NAND -#define MTD_NAND_FSL_NFC_SWECC 1 -#define CONFIG_NAND_FSL_NFC -#define CONFIG_SYS_NAND_BASE 0x400E0000 -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define NAND_MAX_CHIPS CONFIG_SYS_MAX_NAND_DEVICE -#define CONFIG_SYS_NAND_SELECT_DEVICE -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ -#endif - -#define CONFIG_LOADADDR 0xC307FFC0 - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "boot_scripts=boot.scr.uimg boot.scr\0" \ - "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \ - "console=ttyLF0,115200\0" \ - "fdt_file=s32v234-evb.dtb\0" \ - "fdt_high=0xffffffff\0" \ - "initrd_high=0xffffffff\0" \ - "fdt_addr_r=0xC2000000\0" \ - "kernel_addr_r=0xC307FFC0\0" \ - "ramdisk_addr_r=0xC4000000\0" \ - "ramdisk=rootfs.uimg\0"\ - "ip_dyn=yes\0" \ - "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ - "update_sd_firmware_filename=u-boot.imx\0" \ - "update_sd_firmware=" \ - "if test ${ip_dyn} = yes; then " \ - "setenv get_cmd dhcp; " \ - "else " \ - "setenv get_cmd tftp; " \ - "fi; " \ - "if mmc dev ${mmcdev}; then " \ - "if ${get_cmd} ${update_sd_firmware_filename}; then " \ - "setexpr fw_sz ${filesize} / 0x200; " \ - "setexpr fw_sz ${fw_sz} + 1; " \ - "mmc write ${loadaddr} 0x2 ${fw_sz}; " \ - "fi; " \ - "fi\0" \ - "loadramdisk=fatload mmc ${mmcdev}:${mmcpart} ${ramdisk_addr} ${ramdisk}\0" \ - "jtagboot=echo Booting using jtag...; " \ - "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ - "jtagsdboot=echo Booting loading Linux with ramdisk from SD...; " \ - "run loaduimage; run loadramdisk; run loadfdt;"\ - "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ - "boot_net_usb_start=true\0" \ - BOOTENV - -#define BOOT_TARGET_DEVICES(func) \ - func(MMC, mmc, 1) \ - func(MMC, mmc, 0) \ - func(DHCP, dhcp, na) - -#define CONFIG_BOOTCOMMAND \ - "run distro_bootcmd" - -#include <config_distro_bootcmd.h> - -/* Miscellaneous configurable options */ -#define CONFIG_SYS_PROMPT "=> " - -#define CONFIG_SYS_MEMTEST_START (DDR_BASE_ADDR) -#define CONFIG_SYS_MEMTEST_END (DDR_BASE_ADDR + 0x7C00000) - -#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000 - -#ifdef CONFIG_RUN_FROM_IRAM_ONLY -#define CONFIG_SYS_MALLOC_BASE (DDR_BASE_ADDR) -#endif - -#if 0 -/* Configure PXE */ -#define CONFIG_BOOTP_PXE_CLIENTARCH 0x100 -#endif - -/* Physical memory map */ -/* EVB board has 2x256 MB DDR chips, DDR0 and DDR1, u-boot is using just one */ -#define PHYS_SDRAM (DDR_BASE_ADDR) -#define PHYS_SDRAM_SIZE (256 * 1024 * 1024) - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE - -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - -/* environment organization */ -#define CONFIG_ENV_SIZE (8 * 1024) - -#define CONFIG_ENV_OFFSET (12 * 64 * 1024) -#define CONFIG_SYS_MMC_ENV_DEV 0 - - -#define CONFIG_BOOTP_BOOTFILESIZE - -#endif |