diff options
Diffstat (limited to 'include/configs/sama5d3xek.h')
| -rw-r--r-- | include/configs/sama5d3xek.h | 98 |
1 files changed, 0 insertions, 98 deletions
diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h deleted file mode 100644 index 3a712b5..0000000 --- a/include/configs/sama5d3xek.h +++ /dev/null @@ -1,98 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Configuation settings for the SAMA5D3xEK board. - * - * Copyright (C) 2012 - 2013 Atmel - * - * based on at91sam9m10g45ek.h by: - * Stelian Pop <stelian@popies.net> - * Lead Tech Design <www.leadtechdesign.com> - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include "at91-sama5_common.h" - -/* - * This needs to be defined for the OHCI code to work but it is defined as - * ATMEL_ID_UHPHS in the CPU specific header files. - */ -#define ATMEL_ID_UHP 32 - -/* - * Specify the clock enable bit in the PMC_SCER register. - */ -#define ATMEL_PMC_UHP (1 << 6) - -/* board specific (not enough SRAM) */ -#define CONFIG_SAMA5D3_LCD_BASE 0x23E00000 - -/* NOR flash */ -#ifdef CONFIG_MTD_NOR_FLASH -#define CONFIG_SYS_FLASH_BASE 0x10000000 -#define CONFIG_SYS_MAX_FLASH_SECT 131 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#endif - -/* SDRAM */ -#define CONFIG_SYS_SDRAM_BASE 0x20000000 -#define CONFIG_SYS_SDRAM_SIZE 0x20000000 - -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_INIT_SP_ADDR 0x318000 -#else -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE) -#endif - -/* SerialFlash */ - -/* NAND flash */ -#ifdef CONFIG_CMD_NAND -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE 0x60000000 -/* our ALE is AD21 */ -#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) -/* our CLE is AD22 */ -#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) -#define CONFIG_SYS_NAND_ONFI_DETECTION -#endif - -/* USB */ -#ifdef CONFIG_CMD_USB -#define CONFIG_USB_ATMEL_CLK_SEL_UPLL -#define CONFIG_USB_OHCI_NEW -#define CONFIG_SYS_USB_OHCI_CPU_INIT -#define CONFIG_SYS_USB_OHCI_REGS_BASE ATMEL_BASE_OHCI -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "sama5d3" -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 3 -#endif - -#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ - -/* SPL */ -#define CONFIG_SPL_MAX_SIZE 0x18000 -#define CONFIG_SPL_BSS_START_ADDR 0x20000000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 -#define CONFIG_SYS_SPL_MALLOC_START 0x20080000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 - -#define CONFIG_SYS_MONITOR_LEN (512 << 10) - -#ifdef CONFIG_SD_BOOT -#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 -#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -#elif CONFIG_NAND_BOOT -#define CONFIG_SPL_NAND_DRIVERS -#define CONFIG_SPL_NAND_BASE -#endif -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000 -#define CONFIG_SYS_NAND_5_ADDR_CYCLE -#define CONFIG_SYS_NAND_PAGE_SIZE 0x800 -#define CONFIG_SYS_NAND_PAGE_COUNT 64 -#define CONFIG_SYS_NAND_OOBSIZE 64 -#define CONFIG_SYS_NAND_BLOCK_SIZE 0x20000 -#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0x0 - -#endif |