diff options
Diffstat (limited to 'include/configs/siemens-am33x-common.h')
| -rw-r--r-- | include/configs/siemens-am33x-common.h | 468 |
1 files changed, 0 insertions, 468 deletions
diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h deleted file mode 100644 index ea6cc38..0000000 --- a/include/configs/siemens-am33x-common.h +++ /dev/null @@ -1,468 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * siemens am33x common board options - * (C) Copyright 2013 Siemens Schweiz AG - * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. - * - * Based on: - * U-Boot file:/include/configs/am335x_evm.h - * - * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ - */ - -#ifndef __CONFIG_SIEMENS_AM33X_COMMON_H -#define __CONFIG_SIEMENS_AM33X_COMMON_H - -#include <asm/arch/omap.h> - -#define CONFIG_DMA_COHERENT -#define CONFIG_DMA_COHERENT_SIZE (1 << 20) - -#define CONFIG_SYS_MALLOC_LEN (16 * 1024 * 1024) -#ifdef CONFIG_SIEMENS_MACH_TYPE -#define CONFIG_MACH_TYPE CONFIG_SIEMENS_MACH_TYPE -#endif - -#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG - -/* commands to include */ - -#ifndef CONFIG_SPL_BUILD -#define CONFIG_ROOTPATH "/opt/eldk" -#endif - -#define CONFIG_ENV_OVERWRITE 1 - -#define CONFIG_SYS_AUTOLOAD "yes" - -/* Clock Defines */ -#define V_OSCK 24000000 /* Clock output from T2 */ -#define V_SCLK (V_OSCK) - -/* We set the max number of command args high to avoid HUSH bugs. */ -#define CONFIG_SYS_MAXARGS 32 - -/* Console I/O Buffer Size */ -#define CONFIG_SYS_CBSIZE 1024 - -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -/* - * memtest works on 8 MB in DRAM after skipping 32MB from - * start addr of ram disk - */ -#define CONFIG_SYS_MEMTEST_START (PHYS_DRAM_1 + (64 * 1024 * 1024)) -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START \ - + (8 * 1024 * 1024)) - -#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address */ - - /* Physical Memory Map */ -#define PHYS_DRAM_1 0x80000000 /* DRAM Bank #1 */ - -#define CONFIG_SYS_SDRAM_BASE PHYS_DRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \ - GENERATED_GBL_DATA_SIZE) - /* Platform/Board specific defs */ -#define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ -#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ - -/* NS16550 Configuration */ -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#endif -#define CONFIG_SYS_NS16550_CLK (48000000) -#define CONFIG_SYS_NS16550_COM1 0x44e09000 -#define CONFIG_SYS_NS16550_COM4 0x481a6000 - - -/* I2C Configuration */ -#define CONFIG_I2C -#define CONFIG_SYS_I2C - -/* Defines for SPL */ -#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ - CONFIG_SPL_TEXT_BASE) - -#define CONFIG_SPL_BSS_START_ADDR 0x80000000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ - -#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 -#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" - -#define CONFIG_SPL_NAND_BASE -#define CONFIG_SPL_NAND_DRIVERS -#define CONFIG_SPL_NAND_ECC -#define CONFIG_SYS_NAND_ONFI_DETECTION -#define CONFIG_SYS_NAND_5_ADDR_CYCLE -#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ - CONFIG_SYS_NAND_PAGE_SIZE) -#define CONFIG_SYS_NAND_PAGE_SIZE 2048 -#define CONFIG_SYS_NAND_OOBSIZE 64 -#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) -#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS -#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ - 10, 11, 12, 13, 14, 15, 16, 17, \ - 18, 19, 20, 21, 22, 23, 24, 25, \ - 26, 27, 28, 29, 30, 31, 32, 33, \ - 34, 35, 36, 37, 38, 39, 40, 41, \ - 42, 43, 44, 45, 46, 47, 48, 49, \ - 50, 51, 52, 53, 54, 55, 56, 57, } - -#define CONFIG_SYS_NAND_ECCSIZE 512 -#define CONFIG_SYS_NAND_ECCBYTES 14 -#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW - -#define CONFIG_SYS_NAND_ECCSTEPS 4 -#define CONFIG_SYS_NAND_ECCTOTAL (CONFIG_SYS_NAND_ECCBYTES * \ - CONFIG_SYS_NAND_ECCSTEPS) - -#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE - -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 - -/* - * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM - * 64 bytes before this address should be set aside for u-boot.img's - * header. That is 0x800FFFC0--0x80100000 should not be used for any - * other needs. - */ -#define CONFIG_SYS_SPL_MALLOC_START 0x80208000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 - -/* - * Since SPL did pll and ddr initialization for us, - * we don't need to do it twice. - */ -#ifndef CONFIG_SPL_BUILD -#define CONFIG_SKIP_LOWLEVEL_INIT -#endif - -#ifndef CONFIG_SPL_BUILD -/* - * USB configuration - */ -#define CONFIG_AM335X_USB0 -#define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL -#define CONFIG_AM335X_USB1 -#define CONFIG_AM335X_USB1_MODE MUSB_HOST - -/* USB DRACO ID as default */ -#define CONFIG_USBD_HS - -/* USB Device Firmware Update support */ -#define CONFIG_SYS_DFU_DATA_BUF_SIZE (1 << 20) -#define DFU_MANIFEST_POLL_TIMEOUT 25000 - -#endif /* CONFIG_SPL_BUILD */ - -/* - * Default to using SPI for environment, etc. We have multiple copies - * of SPL as the ROM will check these locations. - * 0x0 - 0x20000 : First copy of SPL - * 0x20000 - 0x40000 : Second copy of SPL - * 0x40000 - 0x60000 : Third copy of SPL - * 0x60000 - 0x80000 : Fourth copy of SPL - * 0x80000 - 0xDF000 : U-Boot - * 0xDF000 - 0xE0000 : U-Boot Environment - * 0xE0000 - 0x442000 : Linux Kernel - * 0x442000 - 0x800000 : Userland - */ -#if defined(CONFIG_SPI_BOOT) -# define CONFIG_ENV_OFFSET (892 << 10) /* 892 KiB in */ -# define CONFIG_ENV_SECT_SIZE (4 << 10) /* 4 KB sectors */ -#endif /* SPI support */ - -#define CONFIG_BOOTP_DEFAULT -#define CONFIG_BOOTP_DNS2 -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_NET_RETRY_COUNT 10 - -/* NAND support */ -#ifdef CONFIG_NAND -/* UBI Support */ - -/* Commen environment */ -#define COMMON_ENV_DFU_ARGS "dfu_args=run bootargs_defaults;" \ - "setenv bootargs ${bootargs};" \ - "mtdparts default;" \ - "draco_led 1;" \ - "dfu 0 nand 0;" \ - "draco_led 0;\0" \ - -#define COMMON_ENV_NAND_BOOT \ - "nand_boot=echo Booting from nand; " \ - "if test ${upgrade_available} -eq 1; then " \ - "if test ${bootcount} -gt ${bootlimit}; " \ - "then " \ - "setenv upgrade_available 0;" \ - "setenv ${partitionset_active} true;" \ - "if test -n ${A}; then " \ - "setenv partitionset_active B; " \ - "env delete A; " \ - "fi;" \ - "if test -n ${B}; then " \ - "setenv partitionset_active A; " \ - "env delete B; " \ - "fi;" \ - "saveenv; " \ - "fi;" \ - "fi;" \ - "echo set ${partitionset_active}...;" \ - "run nand_args; " - -#define COMMON_ENV_NAND_CMDS "flash_self=run nand_boot\0" \ - "flash_self_test=setenv testargs test; " \ - "run nand_boot\0" \ - "dfu_start=echo Preparing for dfu mode ...; " \ - "run dfu_args; \0" - -#define COMMON_ENV_SETTINGS \ - "verify=no \0" \ - "project_dir=targetdir\0" \ - "upgrade_available=0\0" \ - "altbootcmd=run bootcmd\0" \ - "partitionset_active=A\0" \ - "loadaddr=0x82000000\0" \ - "kloadaddr=0x81000000\0" \ - "script_addr=0x81900000\0" \ - "console=console=ttyMTD,mtdoops console=ttyO0,115200n8 panic=5\0" \ - "nfsopts=nolock rw\0" \ - "ip_method=none\0" \ - "bootenv=uEnv.txt\0" \ - "bootargs_defaults=setenv bootargs " \ - "console=${console} " \ - "${testargs} " \ - "${optargs}\0" \ - "siemens_help=echo; "\ - "echo Type 'run flash_self' to use kernel and root " \ - "filesystem on memory; echo Type 'run flash_self_test' to " \ - "use kernel and root filesystem on memory, boot in test " \ - "mode; echo Not ready yet: 'run flash_nfs' to use kernel " \ - "from memory and root filesystem over NFS; echo Type " \ - "'run net_nfs' to get Kernel over TFTP and mount root " \ - "filesystem over NFS; " \ - "echo Set partitionset_active variable to 'A' " \ - "or 'B' to select kernel and rootfs partition; " \ - "echo" \ - "\0" - -/* - * Variant 1 partition layout - * chip-size = 256MiB - *| name | size | address area | - *------------------------------------------------------- - *| spl | 128.000 KiB | 0x 0..0x 1ffff | - *| spl.backup1 | 128.000 KiB | 0x 20000..0x 3ffff | - *| spl.backup2 | 128.000 KiB | 0x 40000..0x 5ffff | - *| spl.backup3 | 128.000 KiB | 0x 60000..0x 7ffff | - *| u-boot | 1.875 MiB | 0x 80000..0x 25ffff | - *| uboot.env | 128.000 KiB | 0x 260000..0x 27ffff | - *| kernel_a | 5.000 MiB | 0x 280000..0x 77ffff | - *| kernel_b | 5.000 MiB | 0x 780000..0x c7ffff | - *| mtdoops | 8.000 MiB | 0x c80000..0x 147ffff | - *| rootfs | 235.500 MiB | 0x 1480000..0x fffffff | - *------------------------------------------------------- - - "mtdparts=omap2-nand.0:" \ - "128k(spl)," \ - "128k(spl.backup1)," \ - "128k(spl.backup2)," \ - "128k(spl.backup3)," \ - "1920k(u-boot)," \ - "128k(uboot.env)," \ - "5120k(kernel_a)," \ - "5120k(kernel_b)," \ - "8192k(mtdoops)," \ - "-(rootfs)" - */ - -#define DFU_ALT_INFO_NAND_V1 \ - "spl part 0 1;" \ - "spl.backup1 part 0 2;" \ - "spl.backup2 part 0 3;" \ - "spl.backup3 part 0 4;" \ - "u-boot part 0 5;" \ - "u-boot.env part 0 6;" \ - "kernel_a part 0 7;" \ - "kernel_b part 0 8;" \ - "rootfs partubi 0 10" - -#define CONFIG_ENV_SETTINGS_NAND_V1 \ - "nand_active_ubi_vol=rootfs_a\0" \ - "nand_active_ubi_vol_A=rootfs_a\0" \ - "nand_active_ubi_vol_B=rootfs_b\0" \ - "nand_root_fs_type=ubifs rootwait=1\0" \ - "nand_src_addr=0x280000\0" \ - "nand_src_addr_A=0x280000\0" \ - "nand_src_addr_B=0x780000\0" \ - "nand_args=run bootargs_defaults;" \ - "mtdparts default;" \ - "setenv ${partitionset_active} true;" \ - "if test -n ${A}; then " \ - "setenv nand_active_ubi_vol ${nand_active_ubi_vol_A};" \ - "setenv nand_src_addr ${nand_src_addr_A};" \ - "fi;" \ - "if test -n ${B}; then " \ - "setenv nand_active_ubi_vol ${nand_active_ubi_vol_B};" \ - "setenv nand_src_addr ${nand_src_addr_B};" \ - "fi;" \ - "setenv nand_root ubi0:${nand_active_ubi_vol} rw " \ - "ubi.mtd=9,${ubi_off};" \ - "setenv bootargs ${bootargs} " \ - "root=${nand_root} noinitrd ${mtdparts} " \ - "rootfstype=${nand_root_fs_type} ip=${ip_method} " \ - "console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \ - "=mtdoops\0" \ - COMMON_ENV_DFU_ARGS \ - "dfu_alt_info=" DFU_ALT_INFO_NAND_V1 "\0" \ - COMMON_ENV_NAND_BOOT \ - "nand read.i ${kloadaddr} ${nand_src_addr} " \ - "${nand_img_size}; bootm ${kloadaddr}\0" \ - COMMON_ENV_NAND_CMDS - -#define CONFIG_ENV_SETTINGS_V1 \ - COMMON_ENV_SETTINGS \ - "net_args=run bootargs_defaults;" \ - "mtdparts default;" \ - "setenv bootfile ${project_dir}/kernel/uImage;" \ - "setenv rootpath /home/projects/${project_dir}/rootfs;" \ - "setenv bootargs ${bootargs} " \ - "root=/dev/nfs ${mtdparts} " \ - "nfsroot=${serverip}:${rootpath},${nfsopts} " \ - "ip=${ipaddr}:${serverip}:" \ - "${gatewayip}:${netmask}:${hostname}:eth0:off\0" \ - "net_nfs=echo Booting from network ...; " \ - "run net_args; " \ - "tftpboot ${kloadaddr} ${serverip}:${bootfile}; " \ - "bootm ${kloadaddr}\0" - -/* - * Variant 2 partition layout (default) - * chip-size = 256MiB or 512 MiB - *| name | size | address area | - *------------------------------------------------------- - *| spl | 128.000 KiB | 0x 0..0x 1ffff | - *| spl.backup1 | 128.000 KiB | 0x 20000..0x 3ffff | - *| spl.backup2 | 128.000 KiB | 0x 40000..0x 5ffff | - *| spl.backup3 | 128.000 KiB | 0x 60000..0x 7ffff | - *| u-boot | 1.875 MiB | 0x 80000..0x 25ffff | - *| uboot.env0 | 512.000 KiB | 0x 260000..0x 2Dffff | - *| uboot.env1 | 512.000 KiB | 0x 2E0000..0x 35ffff | - *| mtdoops | 512.000 KiB | 0x 360000..0x 3dffff | - *| (256) rootfs | 252.125 MiB | 0x 3E0000..0x fffffff | - *| (512) rootfs | 508.125 MiB | 0x 3E0000..0x1fffffff | - *------------------------------------------------------- - */ - -#define DFU_ALT_INFO_NAND_V2 \ - "spl part 0 1;" \ - "spl.backup1 part 0 2;" \ - "spl.backup2 part 0 3;" \ - "spl.backup3 part 0 4;" \ - "u-boot part 0 5;" \ - "u-boot.env0 part 0 6;" \ - "u-boot.env1 part 0 7;" \ - "rootfs partubi 0 9" \ - -#define CONFIG_ENV_SETTINGS_NAND_V2 \ - "nand_active_ubi_vol=rootfs_a\0" \ - "rootfs_name=rootfs\0" \ - "kernel_name=uImage\0"\ - "nand_root_fs_type=ubifs rootwait=1\0" \ - "nand_args=run bootargs_defaults;" \ - "mtdparts default;" \ - "setenv ${partitionset_active} true;" \ - "if test -n ${A}; then " \ - "setenv nand_active_ubi_vol ${rootfs_name}_a;" \ - "fi;" \ - "if test -n ${B}; then " \ - "setenv nand_active_ubi_vol ${rootfs_name}_b;" \ - "fi;" \ - "setenv nand_root ubi0:${nand_active_ubi_vol} rw " \ - "ubi.mtd=rootfs,2048;" \ - "setenv bootargs ${bootargs} " \ - "root=${nand_root} noinitrd ${mtdparts} " \ - "rootfstype=${nand_root_fs_type} ip=${ip_method} " \ - "console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \ - "=mtdoops\0" \ - COMMON_ENV_DFU_ARGS \ - "dfu_alt_info=" DFU_ALT_INFO_NAND_V2 "\0" \ - COMMON_ENV_NAND_BOOT \ - "ubi part rootfs ${ubi_off};" \ - "ubifsmount ubi0:${nand_active_ubi_vol};" \ - "ubifsload ${kloadaddr} boot/${kernel_name};" \ - "ubifsload ${loadaddr} boot/${dtb_name}.dtb;" \ - "bootm ${kloadaddr} - ${loadaddr}\0" \ - "nand_boot_backup=ubifsload ${loadaddr} boot/am335x-draco.dtb;" \ - "bootm ${kloadaddr} - ${loadaddr}\0" \ - COMMON_ENV_NAND_CMDS - -#define CONFIG_ENV_SETTINGS_V2 \ - COMMON_ENV_SETTINGS \ - "net_args=run bootargs_defaults;" \ - "mtdparts default;" \ - "setenv bootfile ${project_dir}/kernel/uImage;" \ - "setenv bootdtb ${project_dir}/kernel/dtb;" \ - "setenv rootpath /home/projects/${project_dir}/rootfs;" \ - "setenv bootargs ${bootargs} " \ - "root=/dev/nfs ${mtdparts} " \ - "nfsroot=${serverip}:${rootpath},${nfsopts} " \ - "ip=${ipaddr}:${serverip}:" \ - "${gatewayip}:${netmask}:${hostname}:eth0:off\0" \ - "net_nfs=echo Booting from network ...; " \ - "run net_args; " \ - "tftpboot ${kloadaddr} ${serverip}:${bootfile}; " \ - "tftpboot ${loadaddr} ${serverip}:${bootdtb}; " \ - "bootm ${kloadaddr} - ${loadaddr}\0" - -/* - * Variant 3 partition layout - * chip-size = 512MiB - *| name | size | address area | - *------------------------------------------------------- - *| spl | 128.000 KiB | 0x 0..0x 1ffff | - *| spl.backup1 | 128.000 KiB | 0x 20000..0x 3ffff | - *| spl.backup2 | 128.000 KiB | 0x 40000..0x 5ffff | - *| spl.backup3 | 128.000 KiB | 0x 60000..0x 7ffff | - *| u-boot | 1.875 MiB | 0x 80000..0x 25ffff | - *| uboot.env0 | 512.000 KiB | 0x 260000..0x 2Dffff | - *| uboot.env1 | 512.000 KiB | 0x 2E0000..0x 35ffff | - *| rootfs | 300.000 MiB | 0x 360000..0x12f5ffff | - *| mtdoops | 512.000 KiB | 0x12f60000..0x12fdffff | - *|configuration | 104.125 MiB | 0x12fe0000..0x1fffffff | - *------------------------------------------------------- - - "mtdparts=omap2-nand.0:" \ - "128k(spl)," \ - "128k(spl.backup1)," \ - "128k(spl.backup2)," \ - "128k(spl.backup3)," \ - "1920k(u-boot)," \ - "512k(u-boot.env0)," \ - "512k(u-boot.env1)," \ - "300m(rootfs)," \ - "512k(mtdoops)," \ - "-(configuration)" - - */ - -#define CONFIG_SYS_NAND_BASE (0x08000000) /* physical address */ - /* to access nand at */ - /* CS0 */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND - devices */ -#if !defined(CONFIG_SPI_BOOT) -#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ -#endif -#endif - -/* Reboot after 60 sec if bootcmd fails */ -#define CONFIG_RESET_TO_RETRY -#define CONFIG_BOOT_RETRY_TIME 60 - -#endif /* ! __CONFIG_SIEMENS_AM33X_COMMON_H */ |