diff options
Diffstat (limited to 'include/configs/snapper9g45.h')
-rw-r--r-- | include/configs/snapper9g45.h | 109 |
1 files changed, 0 insertions, 109 deletions
diff --git a/include/configs/snapper9g45.h b/include/configs/snapper9g45.h deleted file mode 100644 index ffcfdca..0000000 --- a/include/configs/snapper9g45.h +++ /dev/null @@ -1,109 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Bluewater Systems Snapper 9G45 module - * - * (C) Copyright 2011 Bluewater Systems - * Author: Andre Renaud <andre@bluewatersys.com> - * Author: Ryan Mallon <ryan@bluewatersys.com> - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* SoC type is defined in boards.cfg */ -#include <asm/hardware.h> -#include <linux/sizes.h> - -/* ARM asynchronous clock */ -#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 - -/* CPU */ -#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG -#define CONFIG_SKIP_LOWLEVEL_INIT_ONLY - -/* SDRAM */ -#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS6 -#define CONFIG_SYS_SDRAM_SIZE (128 * 1024 * 1024) /* 64MB */ -#define CONFIG_SYS_INIT_SP_ADDR (ATMEL_BASE_SRAM + 0x1000 - \ - GENERATED_GBL_DATA_SIZE) - -/* Mem test settings */ -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + (1024 * 1024)) - -/* NAND Flash */ -#define CONFIG_SYS_NAND_ECC_BASE ATMEL_BASE_ECC -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 -#define CONFIG_SYS_NAND_DBW_8 -#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) /* AD21 */ -#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) /* AD22 */ -#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 -#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC8 - -/* Ethernet */ -#define CONFIG_MACB -#define CONFIG_RMII -#define CONFIG_NET_RETRY_COUNT 20 -#define CONFIG_RESET_PHY_R -#define CONFIG_AT91_WANTS_COMMON_PHY -#define CONFIG_TFTP_PORT -#define CONFIG_TFTP_TSIZE - -/* MMC */ -#define CONFIG_GENERIC_ATMEL_MCI - -/* LCD */ -#define CONFIG_ATMEL_LCD -#define CONFIG_GURNARD_SPLASH - -/* GPIOs and IO expander */ -#define CONFIG_ATMEL_LEGACY -#define CONFIG_AT91_GPIO -#define CONFIG_AT91_GPIO_PULLUP 1 - -/* UARTs/Serial console */ -#define CONFIG_ATMEL_USART - -/* Boot options */ -#define CONFIG_SYS_LOAD_ADDR 0x23000000 - -#define CONFIG_BOOTP_BOOTFILESIZE - -/* Environment settings */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "ethaddr=00:00:00:00:00:00\0" \ - "serial=0\0" \ - "stdout=serial_atmel\0" \ - "stderr=serial_atmel\0" \ - "stdin=serial_atmel\0" \ - "bootlimit=3\0" \ - "loadaddr=0x71000000\0" \ - "board_rev=2\0" \ - "bootfile=/tftpboot/uImage\0" \ - "bootargs_def=console=ttyS0,115200 panic=5 quiet lpj=997376\0" \ - "nfsroot=/export/root\0" \ - "boot_working=setenv bootargs $bootargs_def; nboot $loadaddr 0 0x20c0000 && bootm\0" \ - "boot_safe=setenv bootargs $bootargs_def; nboot $loadaddr 0 0xc0000 && bootm\0" \ - "boot_tftp=setenv bootargs $bootargs_def ip=any nfsroot=$nfsroot; setenv autoload y && bootp && bootm\0" \ - "boot_usb=setenv bootargs $bootargs_def; usb start && usb storage && fatload usb 0:1 $loadaddr dds-xm200.bin && bootm\0" \ - "boot_mmc=setenv bootargs $bootargs_def; mmc rescan && fatload mmc 0:1 $loadaddr dds-xm200.bin && bootm\0" \ - "bootcmd=run boot_mmc ; run boot_usb ; run boot_working ; run boot_safe\0" \ - "altbootcmd=run boot_mmc ; run boot_usb ; run boot_safe ; run boot_working\0" - -/* Console settings */ - -/* U-Boot memory settings */ -#define CONFIG_SYS_MALLOC_LEN (1 << 20) - -/* Command line configuration */ -#define CONFIG_CMD_MII -#define CONFIG_CMD_MMC -#define CONFIG_CMD_CACHE - -#endif /* __CONFIG_H */ |