diff options
Diffstat (limited to 'include/configs/stm32mp1.h')
| -rw-r--r-- | include/configs/stm32mp1.h | 173 |
1 files changed, 0 insertions, 173 deletions
diff --git a/include/configs/stm32mp1.h b/include/configs/stm32mp1.h deleted file mode 100644 index 988992b..0000000 --- a/include/configs/stm32mp1.h +++ /dev/null @@ -1,173 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause */ -/* - * Copyright (C) 2018, STMicroelectronics - All Rights Reserved - * - * Configuration settings for the STM32MP15x CPU - */ - -#ifndef __CONFIG_H -#define __CONFIG_H -#include <linux/sizes.h> -#include <asm/arch/stm32.h> - -#ifndef CONFIG_STM32MP1_TRUSTED -/* PSCI support */ -#define CONFIG_ARMV7_PSCI_1_0 -#define CONFIG_ARMV7_SECURE_BASE STM32_SYSRAM_BASE -#define CONFIG_ARMV7_SECURE_MAX_SIZE STM32_SYSRAM_SIZE -#endif - -/* - * Configuration of the external SRAM memory used by U-Boot - */ -#define CONFIG_SYS_SDRAM_BASE STM32_DDR_BASE -#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE - -#ifdef CONFIG_STM32MP1_OPTEE -#define CONFIG_SYS_MEM_TOP_HIDE SZ_32M -#endif /* CONFIG_STM32MP1_OPTEE */ - -/* - * Console I/O buffer size - */ -#define CONFIG_SYS_CBSIZE SZ_1K - -/* - * Needed by "loadb" - */ -#define CONFIG_SYS_LOAD_ADDR STM32_DDR_BASE - -/* ATAGs */ -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG - -/* Extend size of kernel image for uncompression */ -#define CONFIG_SYS_BOOTM_LEN SZ_32M - -/* SPL support */ -#ifdef CONFIG_SPL -/* SPL use DDR */ -#define CONFIG_SPL_BSS_START_ADDR 0xC0200000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x00100000 -#define CONFIG_SYS_SPL_MALLOC_START 0xC0300000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00100000 - -/* limit SYSRAM usage to first 128 KB */ -#define CONFIG_SPL_MAX_SIZE 0x00020000 -#define CONFIG_SPL_STACK (STM32_SYSRAM_BASE + \ - STM32_SYSRAM_SIZE) -#endif /* #ifdef CONFIG_SPL */ - -#define CONFIG_SYS_MEMTEST_START STM32_DDR_BASE -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + SZ_64M) -#define CONFIG_SYS_MEMTEST_SCRATCH (CONFIG_SYS_MEMTEST_END + 4) - -/*MMC SD*/ -#define CONFIG_SYS_MMC_MAX_DEVICE 3 - -/* NAND support */ -#define CONFIG_SYS_NAND_ONFI_DETECTION -#define CONFIG_SYS_MAX_NAND_DEVICE 1 - -/* Ethernet need */ -#ifdef CONFIG_DWC_ETH_QOS -#define CONFIG_SYS_NONCACHED_MEMORY (1 * SZ_1M) /* 1M */ -#define CONFIG_SERVERIP 192.168.1.1 -#define CONFIG_BOOTP_SERVERIP -#define CONFIG_SYS_AUTOLOAD "no" -#endif - -/* Dynamic MTD partition support */ -#if defined(CONFIG_STM32_QSPI) || defined(CONFIG_NAND_STM32_FMC2) -#define CONFIG_SYS_MTDPARTS_RUNTIME -#endif - -#ifdef CONFIG_DM_VIDEO -#define CONFIG_VIDEO_BMP_RLE8 -#define CONFIG_BMP_16BPP -#define CONFIG_BMP_24BPP -#define CONFIG_BMP_32BPP -#endif - -/*****************************************************************************/ -#ifdef CONFIG_DISTRO_DEFAULTS -/*****************************************************************************/ - -#if !defined(CONFIG_SPL_BUILD) - -#define BOOT_TARGET_DEVICES(func) \ - func(MMC, mmc, 1) \ - func(UBIFS, ubifs, 0) \ - func(MMC, mmc, 0) \ - func(MMC, mmc, 2) \ - func(PXE, pxe, na) - -/* - * bootcmd for stm32mp1: - * for serial/usb: execute the stm32prog command - * for mmc boot (eMMC, SD card), boot only on the same device - * for nand boot, boot with on ubifs partition on nand - * for nor boot, use the default order - */ -#define STM32MP_BOOTCMD "bootcmd_stm32mp=" \ - "echo \"Boot over ${boot_device}${boot_instance}!\";" \ - "if test ${boot_device} = serial || test ${boot_device} = usb;" \ - "then stm32prog ${boot_device} ${boot_instance}; " \ - "else " \ - "run env_check;" \ - "if test ${boot_device} = mmc;" \ - "then env set boot_targets \"mmc${boot_instance}\"; fi;" \ - "if test ${boot_device} = nand;" \ - "then env set boot_targets ubifs0; fi;" \ - "run distro_bootcmd;" \ - "fi;\0" - -#include <config_distro_bootcmd.h> - -#ifdef CONFIG_STM32MP1_OPTEE -/* with OPTEE: define specific MTD partitions = teeh, teed, teex */ -#define STM32MP_MTDPARTS \ - "mtdparts_nor0=256k(fsbl1),256k(fsbl2),2m(ssbl),256k(u-boot-env),256k(teeh),256k(teed),256k(teex),-(nor_user)\0" \ - "mtdparts_nand0=2m(fsbl),2m(ssbl1),2m(ssbl2),512k(teeh),512k(teed),512k(teex),-(UBI)\0" - -#else /* CONFIG_STM32MP1_OPTEE */ -#define STM32MP_MTDPARTS \ - "mtdparts_nor0=256k(fsbl1),256k(fsbl2),2m(ssbl),256k(u-boot-env),-(nor_user)\0" \ - "mtdparts_nand0=2m(fsbl),2m(ssbl1),2m(ssbl2),-(UBI)\0" - -#endif /* CONFIG_STM32MP1_OPTEE */ - -#ifndef CONFIG_SYS_MTDPARTS_RUNTIME -#undef STM32MP_MTDPARTS -#define STM32MP_MTDPARTS -#endif - -/* - * memory layout for 32M uncompressed/compressed kernel, - * 1M fdt, 1M script, 1M pxe and 1M for splashimage - * and the ramdisk at the end. - */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "bootdelay=1\0" \ - "kernel_addr_r=0xc2000000\0" \ - "fdt_addr_r=0xc4000000\0" \ - "scriptaddr=0xc4100000\0" \ - "pxefile_addr_r=0xc4200000\0" \ - "splashimage=0xc4300000\0" \ - "ramdisk_addr_r=0xc4400000\0" \ - "fdt_high=0xffffffff\0" \ - "initrd_high=0xffffffff\0" \ - "altbootcmd=run bootcmd\0" \ - "env_default=1\0" \ - "env_check=if test $env_default -eq 1;"\ - " then env set env_default 0;env save;fi\0" \ - STM32MP_BOOTCMD \ - STM32MP_MTDPARTS \ - BOOTENV \ - "boot_net_usb_start=true\0" - -#endif /* ifndef CONFIG_SPL_BUILD */ -#endif /* ifdef CONFIG_DISTRO_DEFAULTS*/ - -#endif /* __CONFIG_H */ |