diff options
Diffstat (limited to 'include/configs/sunxi-common.h')
| -rw-r--r-- | include/configs/sunxi-common.h | 509 |
1 files changed, 0 insertions, 509 deletions
diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h deleted file mode 100644 index 0ef289f..0000000 --- a/include/configs/sunxi-common.h +++ /dev/null @@ -1,509 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2012-2012 Henrik Nordstrom <henrik@henriknordstrom.net> - * - * (C) Copyright 2007-2011 - * Allwinner Technology Co., Ltd. <www.allwinnertech.com> - * Tom Cubie <tangliang@allwinnertech.com> - * - * Configuration settings for the Allwinner sunxi series of boards. - */ - -#ifndef _SUNXI_COMMON_CONFIG_H -#define _SUNXI_COMMON_CONFIG_H - -#include <asm/arch/cpu.h> -#include <linux/stringify.h> - -#ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT -/* - * The U-Boot workarounds bugs in the outdated buggy sunxi-3.4 kernels at the - * expense of restricting some features, so the regular machine id values can - * be used. - */ -# define CONFIG_MACH_TYPE_COMPAT_REV 0 -#else -/* - * A compatibility guard to prevent loading outdated buggy sunxi-3.4 kernels. - * Only sunxi-3.4 kernels with appropriate fixes applied are able to pass - * beyond the machine id check. - */ -# define CONFIG_MACH_TYPE_COMPAT_REV 1 -#endif - -#ifdef CONFIG_ARM64 -#define CONFIG_SYS_BOOTM_LEN (32 << 20) -#endif - -/* Serial & console */ -#define CONFIG_SYS_NS16550_SERIAL -/* ns16550 reg in the low bits of cpu reg */ -#define CONFIG_SYS_NS16550_CLK 24000000 -#ifndef CONFIG_DM_SERIAL -# define CONFIG_SYS_NS16550_REG_SIZE -4 -# define CONFIG_SYS_NS16550_COM1 SUNXI_UART0_BASE -# define CONFIG_SYS_NS16550_COM2 SUNXI_UART1_BASE -# define CONFIG_SYS_NS16550_COM3 SUNXI_UART2_BASE -# define CONFIG_SYS_NS16550_COM4 SUNXI_UART3_BASE -# define CONFIG_SYS_NS16550_COM5 SUNXI_R_UART_BASE -#endif - -/* CPU */ -#define COUNTER_FREQUENCY 24000000 - -/* - * The DRAM Base differs between some models. We cannot use macros for the - * CONFIG_FOO defines which contain the DRAM base address since they end - * up unexpanded in include/autoconf.mk . - * - * So we have to have this #ifdef #else #endif block for these. - */ -#ifdef CONFIG_MACH_SUN9I -#define SDRAM_OFFSET(x) 0x2##x -#define CONFIG_SYS_SDRAM_BASE 0x20000000 -#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* default load address */ -/* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here - * since it needs to fit in with the other values. By also #defining it - * we get warnings if the Kconfig value mismatches. */ -#define CONFIG_SPL_STACK_R_ADDR 0x2fe00000 -#define CONFIG_SPL_BSS_START_ADDR 0x2ff80000 -#else -#define SDRAM_OFFSET(x) 0x4##x -#define CONFIG_SYS_SDRAM_BASE 0x40000000 -#define CONFIG_SYS_LOAD_ADDR 0x42000000 /* default load address */ -/* V3s do not have enough memory to place code at 0x4a000000 */ -/* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here - * since it needs to fit in with the other values. By also #defining it - * we get warnings if the Kconfig value mismatches. */ -#define CONFIG_SPL_STACK_R_ADDR 0x4fe00000 -#define CONFIG_SPL_BSS_START_ADDR 0x4ff80000 -#endif - -#define CONFIG_SPL_BSS_MAX_SIZE 0x00080000 /* 512 KiB */ - -/* - * The A80's A1 sram starts at 0x00010000 rather then at 0x00000000 and is - * slightly bigger. Note that it is possible to map the first 32 KiB of the - * A1 at 0x00000000 like with older SoCs by writing 0x16aa0001 to the - * undocumented 0x008000e0 SYS_CTRL register. Where the 16aa is a key and - * the 1 actually activates the mapping of the first 32 KiB to 0x00000000. - * A64 and H5 also has SRAM A1 at 0x00010000, but no magic remap register - * is known yet. - * H6 has SRAM A1 at 0x00020000. - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SUNXI_SRAM_ADDRESS -/* FIXME: this may be larger on some SoCs */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* 32 KiB */ - -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - -#define PHYS_SDRAM_0 CONFIG_SYS_SDRAM_BASE -#define PHYS_SDRAM_0_SIZE 0x80000000 /* 2 GiB */ - -#ifdef CONFIG_AHCI -#define CONFIG_SYS_64BIT_LBA -#endif - -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_CMDLINE_TAG -#define CONFIG_INITRD_TAG -#define CONFIG_SERIAL_TAG - -#ifdef CONFIG_NAND_SUNXI -#define CONFIG_SYS_NAND_MAX_ECCPOS 1664 -#define CONFIG_SYS_NAND_ONFI_DETECTION -#define CONFIG_SYS_MAX_NAND_DEVICE 8 -#endif - -/* mmc config */ -#ifdef CONFIG_MMC -#define CONFIG_MMC_SUNXI_SLOT 0 -#endif - -#if defined(CONFIG_ENV_IS_IN_MMC) - -#ifdef CONFIG_ARM64 -/* - * This is actually (CONFIG_ENV_OFFSET - - * (CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)), but the value will be used - * directly in a makefile, without the preprocessor expansion. - */ -#define CONFIG_BOARD_SIZE_LIMIT 0x7e000 -#endif - -#if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1 -/* If we have two devices (most likely eMMC + MMC), favour the eMMC */ -#define CONFIG_SYS_MMC_ENV_DEV 1 -#else -/* Otherwise, use the only device we have */ -#define CONFIG_SYS_MMC_ENV_DEV 0 -#endif -#define CONFIG_SYS_MMC_MAX_DEVICE 4 -#endif - -#ifndef CONFIG_MACH_SUN8I_V3S -/* 64MB of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (64 << 20)) -#else -/* 2MB of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (2 << 20)) -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE 1024 /* Print Buffer Size */ - -/* standalone support */ -#define CONFIG_STANDALONE_LOAD_ADDR CONFIG_SYS_LOAD_ADDR - -/* FLASH and environment organization */ - -#define CONFIG_SYS_MONITOR_LEN (768 << 10) /* 768 KiB */ - -#ifndef CONFIG_ARM64 /* AArch64 FEL support is not ready yet */ -#define CONFIG_SPL_BOARD_LOAD_IMAGE -#endif - -/* - * We cannot use expressions here, because expressions won't be evaluated in - * autoconf.mk. - */ -#if CONFIG_SUNXI_SRAM_ADDRESS == 0x10000 -#define CONFIG_SPL_MAX_SIZE 0x7fa0 /* 32 KiB */ -#ifdef CONFIG_ARM64 -/* end of SRAM A2 for now, as SRAM A1 is pretty tight for an ARM64 build */ -#define LOW_LEVEL_SRAM_STACK 0x00054000 -#else -#define LOW_LEVEL_SRAM_STACK 0x00018000 -#endif /* !CONFIG_ARM64 */ -#elif CONFIG_SUNXI_SRAM_ADDRESS == 0x20000 -#define CONFIG_SPL_MAX_SIZE 0x7fa0 /* 32 KiB */ -/* end of SRAM A2 on H6 for now */ -#define LOW_LEVEL_SRAM_STACK 0x00118000 -#else -#define CONFIG_SPL_MAX_SIZE 0x5fa0 /* 24KB on sun4i/sun7i */ -#define LOW_LEVEL_SRAM_STACK 0x00008000 /* End of sram */ -#endif - -#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK - -#define CONFIG_SPL_PAD_TO 32768 /* decimal for 'dd' */ - - -/* I2C */ -#if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \ - defined CONFIG_SY8106A_POWER -#endif - -#if defined CONFIG_I2C0_ENABLE || defined CONFIG_I2C1_ENABLE || \ - defined CONFIG_I2C2_ENABLE || defined CONFIG_I2C3_ENABLE || \ - defined CONFIG_I2C4_ENABLE || defined CONFIG_R_I2C_ENABLE -#define CONFIG_SYS_I2C_MVTWSI -#ifndef CONFIG_DM_I2C -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_SPEED 400000 -#define CONFIG_SYS_I2C_SLAVE 0x7f -#endif -#endif - -#if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD) -#define CONFIG_SYS_I2C_SOFT -#define CONFIG_SYS_I2C_SOFT_SPEED 50000 -#define CONFIG_SYS_I2C_SOFT_SLAVE 0x00 -/* We use pin names in Kconfig and sunxi_name_to_gpio() */ -#define CONFIG_SOFT_I2C_GPIO_SDA soft_i2c_gpio_sda -#define CONFIG_SOFT_I2C_GPIO_SCL soft_i2c_gpio_scl -#ifndef __ASSEMBLY__ -extern int soft_i2c_gpio_sda; -extern int soft_i2c_gpio_scl; -#endif -#define CONFIG_VIDEO_LCD_I2C_BUS 0 /* The lcd panel soft i2c is bus 0 */ -#define CONFIG_SYS_SPD_BUS_NUM 1 /* And the axp209 i2c bus is bus 1 */ -#else -#define CONFIG_SYS_SPD_BUS_NUM 0 /* The axp209 i2c bus is bus 0 */ -#define CONFIG_VIDEO_LCD_I2C_BUS -1 /* NA, but necessary to compile */ -#endif - -/* PMU */ -#if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \ - defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER || \ - defined CONFIG_SY8106A_POWER -#endif - -#ifdef CONFIG_REQUIRE_SERIAL_CONSOLE -#if CONFIG_CONS_INDEX == 1 -#ifdef CONFIG_MACH_SUN9I -#define OF_STDOUT_PATH "/soc/serial@07000000:115200" -#else -#define OF_STDOUT_PATH "/soc@01c00000/serial@01c28000:115200" -#endif -#elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I) -#define OF_STDOUT_PATH "/soc@01c00000/serial@01c28400:115200" -#elif CONFIG_CONS_INDEX == 3 && defined(CONFIG_MACH_SUN8I) -#define OF_STDOUT_PATH "/soc@01c00000/serial@01c28800:115200" -#elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN8I) -#define OF_STDOUT_PATH "/soc@01c00000/serial@01f02800:115200" -#else -#error Unsupported console port nr. Please fix stdout-path in sunxi-common.h. -#endif -#endif /* ifdef CONFIG_REQUIRE_SERIAL_CONSOLE */ - -#ifdef CONFIG_VIDEO_SUNXI -/* - * The amount of RAM to keep free at the top of RAM when relocating u-boot, - * to use as framebuffer. This must be a multiple of 4096. - */ -#define CONFIG_SUNXI_MAX_FB_SIZE (16 << 20) - -#define CONFIG_VIDEO_LOGO -#define CONFIG_VIDEO_STD_TIMINGS -#define CONFIG_I2C_EDID -#define VIDEO_LINE_LEN (pGD->plnSizeX) - -/* allow both serial and cfb console. */ -/* stop x86 thinking in cfbconsole from trying to init a pc keyboard */ - -#endif /* CONFIG_VIDEO_SUNXI */ - -/* Ethernet support */ - -#ifdef CONFIG_SUN7I_GMAC -#define CONFIG_PHY_REALTEK -#endif - -#ifdef CONFIG_USB_EHCI_HCD -#define CONFIG_USB_OHCI_NEW -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 -#endif - -#ifndef CONFIG_SPL_BUILD - -#ifdef CONFIG_ARM64 -/* - * Boards seem to come with at least 512MB of DRAM. - * The kernel should go at 512K, which is the default text offset (that will - * be adjusted at runtime if needed). - * There is no compression for arm64 kernels (yet), so leave some space - * for really big kernels, say 256MB for now. - * Scripts, PXE and DTBs should go afterwards, leaving the rest for the initrd. - * Align the initrd to a 2MB page. - */ -#define BOOTM_SIZE __stringify(0xa000000) -#define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(0080000)) -#define FDT_ADDR_R __stringify(SDRAM_OFFSET(FA00000)) -#define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(FC00000)) -#define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(FD00000)) -#define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(FE00000)) - -#else -/* - * 160M RAM (256M minimum minus 64MB heap + 32MB for u-boot, stack, fb, etc. - * 32M uncompressed kernel, 16M compressed kernel, 1M fdt, - * 1M script, 1M pxe and the ramdisk at the end. - */ -#ifndef CONFIG_MACH_SUN8I_V3S -#define BOOTM_SIZE __stringify(0xa000000) -#define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(2000000)) -#define FDT_ADDR_R __stringify(SDRAM_OFFSET(3000000)) -#define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(3100000)) -#define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(3200000)) -#define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(3300000)) -#else -/* - * 64M RAM minus 2MB heap + 16MB for u-boot, stack, fb, etc. - * 16M uncompressed kernel, 8M compressed kernel, 1M fdt, - * 1M script, 1M pxe and the ramdisk at the end. - */ -#define BOOTM_SIZE __stringify(0x2e00000) -#define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(1000000)) -#define FDT_ADDR_R __stringify(SDRAM_OFFSET(1800000)) -#define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(1900000)) -#define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(1A00000)) -#define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(1B00000)) -#endif -#endif - -#define MEM_LAYOUT_ENV_SETTINGS \ - "bootm_size=" BOOTM_SIZE "\0" \ - "kernel_addr_r=" KERNEL_ADDR_R "\0" \ - "fdt_addr_r=" FDT_ADDR_R "\0" \ - "scriptaddr=" SCRIPT_ADDR_R "\0" \ - "pxefile_addr_r=" PXEFILE_ADDR_R "\0" \ - "ramdisk_addr_r=" RAMDISK_ADDR_R "\0" - -#define DFU_ALT_INFO_RAM \ - "dfu_alt_info_ram=" \ - "kernel ram " KERNEL_ADDR_R " 0x1000000;" \ - "fdt ram " FDT_ADDR_R " 0x100000;" \ - "ramdisk ram " RAMDISK_ADDR_R " 0x4000000\0" - -#ifdef CONFIG_MMC -#if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1 -#define BOOTENV_DEV_MMC_AUTO(devtypeu, devtypel, instance) \ - BOOTENV_DEV_MMC(MMC, mmc, 0) \ - BOOTENV_DEV_MMC(MMC, mmc, 1) \ - "bootcmd_mmc_auto=" \ - "if test ${mmc_bootdev} -eq 1; then " \ - "run bootcmd_mmc1; " \ - "run bootcmd_mmc0; " \ - "elif test ${mmc_bootdev} -eq 0; then " \ - "run bootcmd_mmc0; " \ - "run bootcmd_mmc1; " \ - "fi\0" - -#define BOOTENV_DEV_NAME_MMC_AUTO(devtypeu, devtypel, instance) \ - "mmc_auto " - -#define BOOT_TARGET_DEVICES_MMC(func) func(MMC_AUTO, mmc_auto, na) -#else -#define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0) -#endif -#else -#define BOOT_TARGET_DEVICES_MMC(func) -#endif - -#ifdef CONFIG_AHCI -#define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0) -#else -#define BOOT_TARGET_DEVICES_SCSI(func) -#endif - -#ifdef CONFIG_USB_STORAGE -#define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0) -#else -#define BOOT_TARGET_DEVICES_USB(func) -#endif - -#ifdef CONFIG_CMD_PXE -#define BOOT_TARGET_DEVICES_PXE(func) func(PXE, pxe, na) -#else -#define BOOT_TARGET_DEVICES_PXE(func) -#endif - -#ifdef CONFIG_CMD_DHCP -#define BOOT_TARGET_DEVICES_DHCP(func) func(DHCP, dhcp, na) -#else -#define BOOT_TARGET_DEVICES_DHCP(func) -#endif - -/* FEL boot support, auto-execute boot.scr if a script address was provided */ -#define BOOTENV_DEV_FEL(devtypeu, devtypel, instance) \ - "bootcmd_fel=" \ - "if test -n ${fel_booted} && test -n ${fel_scriptaddr}; then " \ - "echo '(FEL boot)'; " \ - "source ${fel_scriptaddr}; " \ - "fi\0" -#define BOOTENV_DEV_NAME_FEL(devtypeu, devtypel, instance) \ - "fel " - -#define BOOT_TARGET_DEVICES(func) \ - func(FEL, fel, na) \ - BOOT_TARGET_DEVICES_MMC(func) \ - BOOT_TARGET_DEVICES_SCSI(func) \ - BOOT_TARGET_DEVICES_USB(func) \ - BOOT_TARGET_DEVICES_PXE(func) \ - BOOT_TARGET_DEVICES_DHCP(func) - -#ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT -#define BOOTCMD_SUNXI_COMPAT \ - "bootcmd_sunxi_compat=" \ - "setenv root /dev/mmcblk0p3 rootwait; " \ - "if ext2load mmc 0 0x44000000 uEnv.txt; then " \ - "echo Loaded environment from uEnv.txt; " \ - "env import -t 0x44000000 ${filesize}; " \ - "fi; " \ - "setenv bootargs console=${console} root=${root} ${extraargs}; " \ - "ext2load mmc 0 0x43000000 script.bin && " \ - "ext2load mmc 0 0x48000000 uImage && " \ - "bootm 0x48000000\0" -#else -#define BOOTCMD_SUNXI_COMPAT -#endif - -#include <config_distro_bootcmd.h> - -#ifdef CONFIG_USB_KEYBOARD -#define CONSOLE_STDIN_SETTINGS \ - "preboot=usb start\0" \ - "stdin=serial,usbkbd\0" -#else -#define CONSOLE_STDIN_SETTINGS \ - "stdin=serial\0" -#endif - -#ifdef CONFIG_VIDEO -#define CONSOLE_STDOUT_SETTINGS \ - "stdout=serial,vga\0" \ - "stderr=serial,vga\0" -#elif CONFIG_DM_VIDEO -#define CONSOLE_STDOUT_SETTINGS \ - "stdout=serial,vidconsole\0" \ - "stderr=serial,vidconsole\0" -#else -#define CONSOLE_STDOUT_SETTINGS \ - "stdout=serial\0" \ - "stderr=serial\0" -#endif - -#ifdef CONFIG_MTDIDS_DEFAULT -#define SUNXI_MTDIDS_DEFAULT \ - "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" -#else -#define SUNXI_MTDIDS_DEFAULT -#endif - -#ifdef CONFIG_MTDPARTS_DEFAULT -#define SUNXI_MTDPARTS_DEFAULT \ - "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" -#else -#define SUNXI_MTDPARTS_DEFAULT -#endif - -#define PARTS_DEFAULT \ - "name=loader1,start=8k,size=32k,uuid=${uuid_gpt_loader1};" \ - "name=loader2,size=984k,uuid=${uuid_gpt_loader2};" \ - "name=esp,size=128M,bootable,uuid=${uuid_gpt_esp};" \ - "name=system,size=-,uuid=${uuid_gpt_system};" - -#define UUID_GPT_ESP "c12a7328-f81f-11d2-ba4b-00a0c93ec93b" - -#ifdef CONFIG_ARM64 -#define UUID_GPT_SYSTEM "b921b045-1df0-41c3-af44-4c6f280d3fae" -#else -#define UUID_GPT_SYSTEM "69dad710-2ce4-4e3c-b16c-21a1d49abed3" -#endif - -#define CONSOLE_ENV_SETTINGS \ - CONSOLE_STDIN_SETTINGS \ - CONSOLE_STDOUT_SETTINGS - -#ifdef CONFIG_ARM64 -#define FDTFILE "allwinner/" CONFIG_DEFAULT_DEVICE_TREE ".dtb" -#else -#define FDTFILE CONFIG_DEFAULT_DEVICE_TREE ".dtb" -#endif - -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONSOLE_ENV_SETTINGS \ - MEM_LAYOUT_ENV_SETTINGS \ - DFU_ALT_INFO_RAM \ - "fdtfile=" FDTFILE "\0" \ - "console=ttyS0,115200\0" \ - SUNXI_MTDIDS_DEFAULT \ - SUNXI_MTDPARTS_DEFAULT \ - "uuid_gpt_esp=" UUID_GPT_ESP "\0" \ - "uuid_gpt_system=" UUID_GPT_SYSTEM "\0" \ - "partitions=" PARTS_DEFAULT "\0" \ - BOOTCMD_SUNXI_COMPAT \ - BOOTENV - -#else /* ifndef CONFIG_SPL_BUILD */ -#define CONFIG_EXTRA_ENV_SETTINGS -#endif - -#endif /* _SUNXI_COMMON_CONFIG_H */ |