1 files changed, 0 insertions, 66 deletions
diff --git a/include/configs/syzygy_hub.h b/include/configs/syzygy_hub.h
deleted file mode 100644
index e31b77c..0000000
--- a/include/configs/syzygy_hub.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2012 Xilinx
- * (C) Copyright 2017 Opal Kelly Inc.
- *
- * Configuration settings for the SYZYGY Hub development board
- * See zynq-common.h for Zynq common configs
- */
-
-#ifndef __CONFIG_SYZYGY_HUB_H
-#define __CONFIG_SYZYGY_HUB_H
-
-#define CONFIG_EXTRA_ENV_SETTINGS       \
-	"fit_image=fit.itb\0"		\
-	"bitstream_image=download.bit\0"    \
-	"loadbit_addr=0x1000000\0"      \
-	"load_addr=0x2000000\0"		\
-	"fit_size=0x800000\0"		\
-	"flash_off=0x100000\0"		\
-	"nor_flash_off=0xE2100000\0"	\
-	"fdt_high=0x20000000\0"		\
-	"initrd_high=0x20000000\0"	\
-	"loadbootenv_addr=0x2000000\0"  \
-	"fdt_addr_r=0x1f00000\0"        \
-	"pxefile_addr_r=0x2000000\0"    \
-	"kernel_addr_r=0x2000000\0"     \
-	"scriptaddr=0x3000000\0"        \
-	"ramdisk_addr_r=0x3100000\0"    \
-	"bootenv=uEnv.txt\0" \
-	"bootenv_dev=mmc\0" \
-	"loadbootenv=load ${bootenv_dev} 0 ${loadbootenv_addr} ${bootenv}\0" \
-	"importbootenv=echo Importing environment from ${bootenv_dev} ...; " \
-		"env import -t ${loadbootenv_addr} $filesize\0" \
-	"bootenv_existence_test=test -e ${bootenv_dev} 0 /${bootenv}\0" \
-	"setbootenv=if env run bootenv_existence_test; then " \
-			"if env run loadbootenv; then " \
-				"env run importbootenv; " \
-			"fi; " \
-		"fi; \0" \
-	"sd_loadbootenv=set bootenv_dev mmc && " \
-			"run setbootenv \0" \
-	"usb_loadbootenv=set bootenv_dev usb && usb start && run setbootenv\0" \
-	"preboot=if test $modeboot = sdboot; then " \
-			"run sd_loadbootenv; " \
-			"echo Checking if uenvcmd is set ...; " \
-			"if test -n $uenvcmd; then " \
-				"echo Running uenvcmd ...; " \
-				"run uenvcmd; " \
-			"fi; " \
-		"fi; \0" \
-	"sdboot=echo Copying FPGA Bitstream from SD to RAM... && " \
-		"load mmc 0 ${loadbit_addr} ${bitstream_image} && " \
-		"echo Programming FPGA... && " \
-		"fpga loadb 0 ${loadbit_addr} ${filesize} && " \
-		"echo Copying FIT from SD to RAM... && " \
-		"load mmc 0 ${load_addr} ${fit_image} && " \
-		"bootm ${load_addr}\0" \
-	"jtagboot=echo TFTPing FIT to RAM... && " \
-		"tftpboot ${load_addr} ${fit_image} && " \
-		"bootm ${load_addr}\0" \
-		DFU_ALT_INFO \
-		BOOTENV
-
-#include <configs/zynq-common.h>
-
-#endif /* __CONFIG_SYZYGY_HUB_H */