diff options
Diffstat (limited to 'include/configs/tbs2910.h')
| -rw-r--r-- | include/configs/tbs2910.h | 117 |
1 files changed, 0 insertions, 117 deletions
diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h deleted file mode 100644 index 46d67a7..0000000 --- a/include/configs/tbs2910.h +++ /dev/null @@ -1,117 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2014 Soeren Moch <smoch@web.de> - * - * Configuration settings for the TBS2910 MatrixARM board. - */ - -#ifndef __TBS2910_CONFIG_H -#define __TBS2910_CONFIG_H - -#include "mx6_common.h" - -/* General configuration */ - -#define CONFIG_MACH_TYPE 3980 - -#define CONFIG_SYS_HZ 1000 - -#define CONFIG_IMX_THERMAL - -/* Physical Memory Map */ -#define CONFIG_SYS_SDRAM_BASE MMDC0_ARB_BASE_ADDR - -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - -#define CONFIG_SYS_MALLOC_LEN (128 * 1024 * 1024) - -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_MEMTEST_END \ - (CONFIG_SYS_MEMTEST_START + 500 * 1024 * 1024) - -#define CONFIG_SYS_BOOTMAPSZ 0x10000000 - -/* Serial console */ -#define CONFIG_MXC_UART -#define CONFIG_MXC_UART_BASE UART1_BASE /* select UART1/UART2 */ - -/* Framebuffer */ -#ifdef CONFIG_VIDEO -#define CONFIG_VIDEO_BMP_RLE8 -#define CONFIG_IMX_HDMI -#define CONFIG_IMX_VIDEO_SKIP -#endif - -/* PCI */ -#ifdef CONFIG_CMD_PCI -#define CONFIG_PCI_SCAN_SHOW -#define CONFIG_PCIE_IMX -#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12) -#endif - -/* SATA */ -#ifdef CONFIG_CMD_SATA -#define CONFIG_SYS_SATA_MAX_DEVICE 1 -#define CONFIG_DWC_AHSATA_PORT_ID 0 -#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR -#define CONFIG_LBA48 -#define CONFIG_SYS_64BIT_LBA -#endif - -/* USB */ -#ifdef CONFIG_CMD_USB -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#ifdef CONFIG_CMD_USB_MASS_STORAGE -#define CONFIG_USBD_HS -#endif /* CONFIG_CMD_USB_MASS_STORAGE */ -#endif /* CONFIG_CMD_USB */ - -/* Environment organization */ -#define CONFIG_SYS_MMC_ENV_DEV 2 /* overwritten on SD boot */ -#define CONFIG_SYS_MMC_ENV_PART 1 /* overwritten on SD boot */ -#define CONFIG_ENV_SIZE (8 * 1024) -#define CONFIG_ENV_OFFSET (384 * 1024) -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BOARD_SIZE_LIMIT 392192 /* (CONFIG_ENV_OFFSET - 1024) */ - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "bootargs_mmc1=console=ttymxc0,115200 di0_primary console=tty1\0" \ - "bootargs_mmc2=video=mxcfb0:dev=hdmi,1920x1080M@60 " \ - "video=mxcfb1:off video=mxcfb2:off fbmem=28M\0" \ - "bootargs_mmc3=root=/dev/mmcblk0p1 rootwait consoleblank=0 quiet\0" \ - "bootargs_mmc=setenv bootargs ${bootargs_mmc1} ${bootargs_mmc2} " \ - "${bootargs_mmc3}\0" \ - "bootargs_upd=setenv bootargs console=ttymxc0,115200 " \ - "rdinit=/sbin/init enable_wait_mode=off\0" \ - "bootcmd_mmc=run bootargs_mmc; mmc dev 2; " \ - "mmc read 0x10800000 0x800 0x4000; bootm 0x10800000\0" \ - "bootcmd_up1=load mmc 1 0x10800000 uImage\0" \ - "bootcmd_up2=load mmc 1 0x10d00000 uramdisk.img; " \ - "run bootargs_upd; " \ - "bootm 0x10800000 0x10d00000\0" \ - "console=ttymxc0\0" \ - "fan=gpio set 92\0" \ - "set_con_serial=setenv stdout serial; " \ - "setenv stderr serial\0" \ - "set_con_hdmi=setenv stdout serial,vga; " \ - "setenv stderr serial,vga\0" \ - "stderr=serial,vga\0" \ - "stdin=serial,usbkbd\0" \ - "stdout=serial,vga\0" - -#define CONFIG_BOOTCOMMAND \ - "mmc rescan; " \ - "if run bootcmd_up1; then " \ - "run bootcmd_up2; " \ - "else " \ - "run bootcmd_mmc; " \ - "fi" - -#endif /* __TBS2910_CONFIG_H * */ |