diff options
Diffstat (limited to 'include/configs/ti_omap4_common.h')
| -rw-r--r-- | include/configs/ti_omap4_common.h | 130 |
1 files changed, 0 insertions, 130 deletions
diff --git a/include/configs/ti_omap4_common.h b/include/configs/ti_omap4_common.h deleted file mode 100644 index 1e31622..0000000 --- a/include/configs/ti_omap4_common.h +++ /dev/null @@ -1,130 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2010 - * Texas Instruments Incorporated. - * Aneesh V <aneesh@ti.com> - * Steve Sakoman <steve@sakoman.com> - * - * TI OMAP4 common configuration settings - */ - -#ifndef __CONFIG_TI_OMAP4_COMMON_H -#define __CONFIG_TI_OMAP4_COMMON_H - -#ifndef CONFIG_SYS_L2CACHE_OFF -#define CONFIG_SYS_L2_PL310 1 -#define CONFIG_SYS_PL310_BASE 0x48242000 -#endif - -/* Get CPU defs */ -#include <asm/arch/cpu.h> -#include <asm/arch/omap.h> - -/* Use General purpose timer 1 */ -#define CONFIG_SYS_TIMERBASE GPT2_BASE - -/* - * For the DDR timing information we can either dynamically determine - * the timings to use or use pre-determined timings (based on using the - * dynamic method. Default to the static timing infomation. - */ -#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS -#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS -#define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION -#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS -#endif - -#include <configs/ti_armv7_omap.h> - -/* - * Hardware drivers - */ -#define CONFIG_SYS_NS16550_CLK 48000000 -#if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_DM_SERIAL) -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_COM3 UART3_BASE -#endif - -/* TWL6030 */ -#ifndef CONFIG_SPL_BUILD -#define CONFIG_TWL6030_POWER 1 -#endif - -/* USB */ - -/* USB device configuration */ -#define CONFIG_USB_DEVICE 1 -#define CONFIG_USB_TTY 1 - -/* - * Environment setup - */ -#define BOOTENV_DEV_LEGACY_MMC(devtypeu, devtypel, instance) \ - "bootcmd_" #devtypel #instance "=" \ - "setenv mmcdev " #instance"; "\ - "setenv bootpart " #instance":2 ; "\ - "run mmcboot\0" - -#define BOOTENV_DEV_NAME_LEGACY_MMC(devtypeu, devtypel, instance) \ - #devtypel #instance " " - -#define BOOTENV_DEV_NAME_NAND(devtypeu, devtypel, instance) \ - #devtypel #instance " " - -#define BOOT_TARGET_DEVICES(func) \ - func(MMC, mmc, 0) \ - func(LEGACY_MMC, legacy_mmc, 0) \ - func(MMC, mmc, 1) \ - func(LEGACY_MMC, legacy_mmc, 1) \ - func(PXE, pxe, na) \ - func(DHCP, dhcp, na) - -#include <config_distro_bootcmd.h> -#include <environment/ti/mmc.h> - -#define CONFIG_EXTRA_ENV_SETTINGS \ - DEFAULT_LINUX_BOOT_ENV \ - DEFAULT_MMC_TI_ARGS \ - DEFAULT_FIT_TI_ARGS \ - "console=ttyO2,115200n8\0" \ - "fdtfile=undefined\0" \ - "bootpart=0:2\0" \ - "bootdir=/boot\0" \ - "bootfile=zImage\0" \ - "usbtty=cdc_acm\0" \ - "vram=16M\0" \ - "loaduimage=load mmc ${mmcdev} ${loadaddr} uImage\0" \ - "uimageboot=echo Booting from mmc${mmcdev} ...; " \ - "run args_mmc; " \ - "bootm ${loadaddr}\0" \ - "findfdt="\ - "if test $board_name = sdp4430; then " \ - "setenv fdtfile omap4-sdp.dtb; fi; " \ - "if test $board_name = panda; then " \ - "setenv fdtfile omap4-panda.dtb; fi;" \ - "if test $board_name = panda-a4; then " \ - "setenv fdtfile omap4-panda-a4.dtb; fi;" \ - "if test $board_name = panda-es; then " \ - "setenv fdtfile omap4-panda-es.dtb; fi;" \ - "if test $board_name = duovero; then " \ - "setenv fdtfile omap4-duovero-parlor.dtb; fi;" \ - "if test $fdtfile = undefined; then " \ - "echo WARNING: Could not determine device tree to use; fi; \0" \ - BOOTENV - -/* - * Defines for SPL - * It is known that this will break HS devices. Since the current size of - * SPL is overlapped with public stack and breaking non HS devices to boot. - * So moving TEXT_BASE down to non-HS limit. - */ -#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ - (128 << 20)) - -#ifdef CONFIG_SPL_BUILD -/* No need for i2c in SPL mode as we will use SRI2C for PMIC access on OMAP4 */ -#undef CONFIG_SYS_I2C -#endif - -#endif /* __CONFIG_TI_OMAP4_COMMON_H */ |