diff options
Diffstat (limited to 'include/configs/titanium.h')
| -rw-r--r-- | include/configs/titanium.h | 165 |
1 files changed, 0 insertions, 165 deletions
diff --git a/include/configs/titanium.h b/include/configs/titanium.h deleted file mode 100644 index c24d657..0000000 --- a/include/configs/titanium.h +++ /dev/null @@ -1,165 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2013 Stefan Roese <sr@denx.de> - * - * Configuration settings for the ProjectionDesign / Barco - * Titanium board. - * - * Based on mx6qsabrelite.h which is: - * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include "mx6_common.h" - -#define CONFIG_MX6Q - -/* Provide the MACH_TYPE value that the vendor kernel requires. */ -#define CONFIG_MACH_TYPE 3769 - -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (2 * 1024 * 1024) - -#define CONFIG_MXC_UART -#define CONFIG_MXC_UART_BASE UART1_BASE - -/* I2C Configs */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_MXC -#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ -#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ -#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ -#define CONFIG_SYS_I2C_SPEED 100000 - -/* MMC Configs */ -#define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_FSL_USDHC_NUM 1 - -#define CONFIG_FEC_MXC -#define IMX_FEC_BASE ENET_BASE_ADDR -#define CONFIG_FEC_XCV_TYPE RGMII -#define CONFIG_FEC_MXC_PHYADDR 4 - -/* USB Configs */ -#define CONFIG_MXC_USB_PORT 1 -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 - -#define CONFIG_SYS_MEMTEST_START 0x10000000 -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (500 << 20)) - -#define CONFIG_HOSTNAME "titanium" -#define CONFIG_UBI_PART ubi -#define CONFIG_UBIFS_VOLUME rootfs0 - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "kernel=" CONFIG_HOSTNAME "/uImage\0" \ - "kernel_fs=/boot/uImage\0" \ - "kernel_addr=11000000\0" \ - "dtb=" CONFIG_HOSTNAME "/" \ - CONFIG_HOSTNAME ".dtb\0" \ - "dtb_fs=/boot/" CONFIG_HOSTNAME ".dtb\0" \ - "dtb_addr=12800000\0" \ - "script=boot.scr\0" \ - "uimage=uImage\0" \ - "console=ttymxc0\0" \ - "baudrate=115200\0" \ - "fdt_high=0xffffffff\0" \ - "initrd_high=0xffffffff\0" \ - "mmcdev=0\0" \ - "mmcpart=1\0" \ - "uimage=uImage\0" \ - "loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr}" \ - " ${script}\0" \ - "bootscript=echo Running bootscript from mmc ...; source\0" \ - "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \ - "mmcroot=/dev/mmcblk0p2\0" \ - "mmcargs=setenv bootargs console=${console},${baudrate} " \ - "root=${mmcroot} rootwait rw\0" \ - "bootmmc=run mmcargs; fatload mmc ${mmcdev}:${mmcpart} ${loadaddr}" \ - " ${uimage}; bootm\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "addcon=setenv bootargs ${bootargs} console=ttymxc0," \ - "${baudrate}\0" \ - "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ - "rootpath=/opt/eldk-5.3/armv7a/rootfs-minimal-mtdutils\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ubifs=" CONFIG_HOSTNAME "/ubifs.img\0" \ - "part=" __stringify(CONFIG_UBI_PART) "\0" \ - "boot_vol=0\0" \ - "vol=" __stringify(CONFIG_UBIFS_VOLUME) "\0" \ - "load_ubifs=tftp ${kernel_addr} ${ubifs}\0" \ - "update_ubifs=ubi part ${part};ubi write ${kernel_addr} ${vol}" \ - " ${filesize}\0" \ - "upd_ubifs=run load_ubifs update_ubifs\0" \ - "init_ubi=nand erase.part ubi;ubi part ${part};" \ - "ubi create ${vol} c800000\0" \ - "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \ - "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ - "nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip" \ - " addcon addmtd;" \ - "bootm ${kernel_addr} - ${dtb_addr}\0" \ - "ubifsargs=set bootargs ubi.mtd=ubi " \ - "root=ubi:rootfs${boot_vol} rootfstype=ubifs\0" \ - "ubifs_mount=ubi part ubi;ubifsmount ubi:rootfs${boot_vol}\0" \ - "ubifs_load=ubifsload ${kernel_addr} ${kernel_fs};" \ - "ubifsload ${dtb_addr} ${dtb_fs};\0" \ - "nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip addcon " \ - "addmtd;bootm ${kernel_addr} - ${dtb_addr}\0" \ - "load_kernel=tftp ${kernel_addr} ${kernel}\0" \ - "load_dtb=tftp ${dtb_addr} ${dtb}\0" \ - "net_nfs=run load_dtb load_kernel; " \ - "run nfsargs addip addcon addmtd;" \ - "bootm ${kernel_addr} - ${dtb_addr}\0" \ - "delenv=env default -a -f; saveenv; reset\0" - -#define CONFIG_BOOTCOMMAND "run nand_ubifs" - -/* Physical Memory Map */ -#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR -#define PHYS_SDRAM_SIZE (512 << 20) - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE - -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - -/* Enable NAND support */ -#ifdef CONFIG_CMD_NAND - -/* NAND stuff */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE 0x40000000 -#define CONFIG_SYS_NAND_5_ADDR_CYCLE -#define CONFIG_SYS_NAND_ONFI_DETECTION - -/* DMA stuff, needed for GPMI/MXS NAND support */ - -/* Environment in NAND */ -#define CONFIG_ENV_OFFSET (16 << 20) -#define CONFIG_ENV_SECT_SIZE (128 << 10) -#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE -#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + (512 << 10)) -#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE - -#else /* CONFIG_CMD_NAND */ - -/* Environment in MMC */ -#define CONFIG_ENV_SIZE (8 << 10) -#define CONFIG_ENV_OFFSET (6 * 64 * 1024) -#define CONFIG_SYS_MMC_ENV_DEV 0 - -#endif /* CONFIG_CMD_NAND */ - -/* UBI/UBIFS config options */ - -#endif /* __CONFIG_H */ |