diff options
Diffstat (limited to 'include/configs/topic_miami.h')
| -rw-r--r-- | include/configs/topic_miami.h | 123 |
1 files changed, 0 insertions, 123 deletions
diff --git a/include/configs/topic_miami.h b/include/configs/topic_miami.h deleted file mode 100644 index b98656d..0000000 --- a/include/configs/topic_miami.h +++ /dev/null @@ -1,123 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2014 Topic Embedded Products - * - * Configuration for Zynq Evaluation and Development Board - Miami - * See zynq-common.h for Zynq common configs - */ - -#ifndef __CONFIG_TOPIC_MIAMI_H -#define __CONFIG_TOPIC_MIAMI_H - - -/* Speed up boot time by ignoring the environment which we never used */ - -#include "zynq-common.h" - -/* Fixup settings */ -#undef CONFIG_ENV_SIZE -#define CONFIG_ENV_SIZE 0x8000 -#undef CONFIG_ENV_OFFSET -#define CONFIG_ENV_OFFSET 0x80000 - -/* SPL settings */ -#undef CONFIG_SPL_ETH_SUPPORT -#undef CONFIG_SPL_MAX_FOOTPRINT -#define CONFIG_SPL_MAX_FOOTPRINT CONFIG_SYS_SPI_U_BOOT_OFFS -#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" - -/* sspi command isn't useful */ -#undef CONFIG_CMD_SPI - -/* No useful gpio */ -#undef CONFIG_ZYNQ_GPIO -#undef CONFIG_CMD_GPIO - -/* No falcon support */ -#undef CONFIG_SPL_OS_BOOT -#undef CONFIG_SPL_FPGA_SUPPORT - -/* FPGA commands that we don't use */ - -/* Extras */ -#undef CONFIG_SYS_MEMTEST_START -#define CONFIG_SYS_MEMTEST_START 0 -#undef CONFIG_SYS_MEMTEST_END -#define CONFIG_SYS_MEMTEST_END 0x18000000 - -/* Faster flash, ours may run at 108 MHz */ -#undef CONFIG_SPI_FLASH_WINBOND - -/* Setup proper boot sequences for Miami boards */ - -#if defined(CONFIG_USB) -# define EXTRA_ENV_USB \ - "usbreset=i2c dev 1 && i2c mw 41 1 ff && i2c mw 41 3 fe && "\ - "i2c mw 41 1 fe && i2c mw 41 1 ff\0" \ - "usbboot=run usbreset && if usb start; then " \ - "echo Booting from USB... && " \ - "if load usb 0 0x1900000 ${bootscript}; then "\ - "source 0x1900000; fi; " \ - "load usb 0 ${kernel_addr} ${kernel_image} && " \ - "load usb 0 ${devicetree_addr} ${devicetree_image} && " \ - "load usb 0 ${ramdisk_load_address} ${ramdisk_image} && " \ - "bootm ${kernel_addr} ${ramdisk_load_address} "\ - "${devicetree_addr}; " \ - "fi\0" - /* Note that addresses here should match the addresses in the env */ -# undef DFU_ALT_INFO -# define DFU_ALT_INFO \ - "dfu_alt_info=" \ - "uImage ram 0x2080000 0x500000;" \ - "devicetree.dtb ram 0x2000000 0x20000;" \ - "uramdisk.image.gz ram 0x4000000 0x10000000\0" \ - "dfu_ram=run usbreset && dfu 0 ram 0\0" \ - "thor_ram=run usbreset && thordown 0 ram 0\0" -#else -# define EXTRA_ENV_USB -#endif - -#undef CONFIG_EXTRA_ENV_SETTINGS -#define CONFIG_EXTRA_ENV_SETTINGS \ - "kernel_image=uImage\0" \ - "kernel_addr=0x2080000\0" \ - "ramdisk_image=uramdisk.image.gz\0" \ - "ramdisk_load_address=0x4000000\0" \ - "devicetree_image=devicetree.dtb\0" \ - "devicetree_addr=0x2000000\0" \ - "bitstream_image=fpga.bin\0" \ - "bootscript=autorun.scr\0" \ - "loadbit_addr=0x100000\0" \ - "loadbootenv_addr=0x2000000\0" \ - "kernel_size=0x440000\0" \ - "devicetree_size=0x10000\0" \ - "boot_size=0xF00000\0" \ - "fdt_high=0x20000000\0" \ - "initrd_high=0x20000000\0" \ - "mmc_loadbit=echo Loading bitstream from SD/MMC/eMMC to RAM.. && " \ - "mmcinfo && " \ - "load mmc 0 ${loadbit_addr} ${bitstream_image} && " \ - "fpga load 0 ${loadbit_addr} ${filesize}\0" \ - "qspiboot=echo Booting from QSPI flash... && " \ - "sf probe && " \ - "sf read ${devicetree_addr} 0xA0000 ${devicetree_size} && " \ - "sf read ${kernel_addr} 0xC0000 ${kernel_size} && " \ - "bootm ${kernel_addr} - ${devicetree_addr}\0" \ - "sdboot=if mmcinfo; then " \ - "setenv bootargs console=ttyPS0,115200 " \ - "root=/dev/mmcblk0p2 rw rootfstype=ext4 " \ - "rootwait quiet ; " \ - "load mmc 0 ${kernel_addr} ${kernel_image}&& " \ - "load mmc 0 ${devicetree_addr} ${devicetree_image}&& " \ - "bootm ${kernel_addr} - ${devicetree_addr}; " \ - "fi\0" \ - EXTRA_ENV_USB \ - DFU_ALT_INFO - -#undef CONFIG_BOOTCOMMAND -#define CONFIG_BOOTCOMMAND "if mmcinfo; then " \ - "if fatload mmc 0 0x1900000 ${bootscript}; then source 0x1900000; " \ - "fi; fi; run $modeboot" -#undef CONFIG_DISPLAY_BOARDINFO - -#endif /* __CONFIG_TOPIC_MIAMI_H */ |