summaryrefslogtreecommitdiff
path: root/include/configs/tqma6.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs/tqma6.h')
-rw-r--r--include/configs/tqma6.h341
1 files changed, 0 insertions, 341 deletions
diff --git a/include/configs/tqma6.h b/include/configs/tqma6.h
deleted file mode 100644
index 13e3d60..0000000
--- a/include/configs/tqma6.h
+++ /dev/null
@@ -1,341 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2013, 2014, 2017 Markus Niebel <Markus.Niebel@tq-group.com>
- *
- * Configuration settings for the TQ Systems TQMa6<Q,D,DL,S> module.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <linux/kconfig.h>
-/* SPL */
-/* #if defined(CONFIG_SPL_BUILD) */
-/* common IMX6 SPL configuration */
-#include "imx6_spl.h"
-
-/* #endif */
-
-/* place code in last 4 MiB of RAM */
-
-#include "mx6_common.h"
-
-#if defined(CONFIG_TQMA6S)
-#define PHYS_SDRAM_SIZE (512u * SZ_1M)
-#elif defined(CONFIG_TQMA6DL)
-#define PHYS_SDRAM_SIZE (SZ_1G)
-#elif defined(CONFIG_TQMA6Q)
-#define PHYS_SDRAM_SIZE (SZ_1G)
-#endif
-
-#define CONFIG_MXC_UART
-
-/* SPI Flash */
-
-#define TQMA6_SPI_FLASH_SECTOR_SIZE SZ_64K
-
-/* I2C Configs */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_SPEED 100000
-
-/* I2C EEPROM (M24C64) */
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
-#define CONFIG_SYS_I2C_EEPROM_PAGE_WRITE_BITS 5 /* 32 Bytes */
-#define CONFIG_SYS_I2C_EEPROM_PAGE_WRITE_DELAY_MS 20
-
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
-#define CONFIG_POWER_PFUZE100
-#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
-#define TQMA6_PFUZE100_I2C_BUS 2
-
-/* MMC Configs */
-#define CONFIG_SYS_FSL_ESDHC_ADDR 0
-
-/* USB Configs */
-#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
-
-#define CONFIG_FEC_MXC
-#define IMX_FEC_BASE ENET_BASE_ADDR
-
-#define CONFIG_ARP_TIMEOUT 200UL
-
-#define CONFIG_ENV_SIZE (SZ_8K)
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * SZ_1M)
-
-#if defined(CONFIG_TQMA6X_MMC_BOOT)
-
-#define TQMA6_UBOOT_OFFSET SZ_1K
-#define TQMA6_UBOOT_SECTOR_START 0x2
-#define TQMA6_UBOOT_SECTOR_COUNT 0x7fe
-
-#define CONFIG_ENV_OFFSET SZ_1M
-#define CONFIG_SYS_MMC_ENV_DEV 0
-
-#define TQMA6_FDT_OFFSET (2 * SZ_1M)
-#define TQMA6_FDT_SECTOR_START 0x1000
-#define TQMA6_FDT_SECTOR_COUNT 0x800
-
-#define TQMA6_KERNEL_SECTOR_START 0x2000
-#define TQMA6_KERNEL_SECTOR_COUNT 0x2000
-
-#define TQMA6_EXTRA_BOOTDEV_ENV_SETTINGS \
- "uboot_start="__stringify(TQMA6_UBOOT_SECTOR_START)"\0" \
- "uboot_size="__stringify(TQMA6_UBOOT_SECTOR_COUNT)"\0" \
- "fdt_start="__stringify(TQMA6_FDT_SECTOR_START)"\0" \
- "fdt_size="__stringify(TQMA6_FDT_SECTOR_COUNT)"\0" \
- "kernel_start="__stringify(TQMA6_KERNEL_SECTOR_START)"\0" \
- "kernel_size="__stringify(TQMA6_KERNEL_SECTOR_COUNT)"\0" \
- "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
- "loadimage=mmc dev ${mmcdev}; " \
- "mmc read ${loadaddr} ${kernel_start} ${kernel_size};\0" \
- "loadfdt=mmc dev ${mmcdev}; " \
- "mmc read ${fdt_addr} ${fdt_start} ${fdt_size};\0" \
- "update_uboot=if tftp ${uboot}; then " \
- "if itest ${filesize} > 0; then " \
- "mmc dev ${mmcdev}; mmc rescan; " \
- "setexpr blkc ${filesize} + 0x1ff; " \
- "setexpr blkc ${blkc} / 0x200; " \
- "if itest ${blkc} <= ${uboot_size}; then " \
- "mmc write ${loadaddr} ${uboot_start} " \
- "${blkc}; " \
- "fi; " \
- "fi; fi; " \
- "setenv filesize; setenv blkc \0" \
- "update_kernel=run kernel_name; " \
- "if tftp ${kernel}; then " \
- "if itest ${filesize} > 0; then " \
- "mmc dev ${mmcdev}; mmc rescan; " \
- "setexpr blkc ${filesize} + 0x1ff; " \
- "setexpr blkc ${blkc} / 0x200; " \
- "if itest ${blkc} <= ${kernel_size}; then " \
- "mmc write ${loadaddr} " \
- "${kernel_start} ${blkc}; " \
- "fi; " \
- "fi; " \
- "fi; " \
- "setenv filesize; setenv blkc \0" \
- "update_fdt=if tftp ${fdt_file}; then " \
- "if itest ${filesize} > 0; then " \
- "mmc dev ${mmcdev}; mmc rescan; " \
- "setexpr blkc ${filesize} + 0x1ff; " \
- "setexpr blkc ${blkc} / 0x200; " \
- "if itest ${blkc} <= ${fdt_size}; then " \
- "mmc write ${loadaddr} ${fdt_start} ${blkc}; " \
- "fi; " \
- "fi; fi; " \
- "setenv filesize; setenv blkc \0" \
-
-#define CONFIG_BOOTCOMMAND \
- "run mmcboot; run netboot; run panicboot"
-
-#elif defined(CONFIG_TQMA6X_SPI_BOOT)
-
-#define TQMA6_UBOOT_OFFSET 0x400
-#define TQMA6_UBOOT_SECTOR_START 0x0
-/* max u-boot size: 512k */
-#define TQMA6_UBOOT_SECTOR_SIZE TQMA6_SPI_FLASH_SECTOR_SIZE
-#define TQMA6_UBOOT_SECTOR_COUNT 0x8
-#define TQMA6_UBOOT_SIZE (TQMA6_UBOOT_SECTOR_SIZE * \
- TQMA6_UBOOT_SECTOR_COUNT)
-
-#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
-#define CONFIG_ENV_OFFSET (TQMA6_UBOOT_SIZE)
-#define CONFIG_ENV_SECT_SIZE TQMA6_SPI_FLASH_SECTOR_SIZE
-#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \
- CONFIG_ENV_SECT_SIZE)
-
-#define TQMA6_FDT_OFFSET (CONFIG_ENV_OFFSET_REDUND + \
- CONFIG_ENV_SECT_SIZE)
-#define TQMA6_FDT_SECT_SIZE (TQMA6_SPI_FLASH_SECTOR_SIZE)
-
-#define TQMA6_FDT_SECTOR_START 0x0a /* 8 Sector u-boot, 2 Sector env */
-#define TQMA6_FDT_SECTOR_COUNT 0x01
-
-#define TQMA6_KERNEL_SECTOR_START 0x10
-#define TQMA6_KERNEL_SECTOR_COUNT 0x60
-
-#define TQMA6_EXTRA_BOOTDEV_ENV_SETTINGS \
- "mmcblkdev=0\0" \
- "uboot_offset="__stringify(TQMA6_UBOOT_OFFSET)"\0" \
- "uboot_sectors="__stringify(TQMA6_UBOOT_SECTOR_COUNT)"\0" \
- "fdt_start="__stringify(TQMA6_FDT_SECTOR_START)"\0" \
- "fdt_sectors="__stringify(TQMA6_FDT_SECTOR_COUNT)"\0" \
- "kernel_start="__stringify(TQMA6_KERNEL_SECTOR_START)"\0" \
- "kernel_sectors="__stringify(TQMA6_KERNEL_SECTOR_COUNT)"\0" \
- "update_uboot=if tftp ${uboot}; then " \
- "if itest ${filesize} > 0; then " \
- "setexpr blkc ${filesize} + " \
- __stringify(TQMA6_UBOOT_OFFSET) "; " \
- "setexpr size ${uboot_sectors} * " \
- __stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \
- "if itest ${blkc} <= ${size}; then " \
- "sf probe; " \
- "sf erase 0 ${size}; " \
- "sf write ${loadaddr} ${uboot_offset} " \
- "${filesize}; " \
- "fi; " \
- "fi; fi; " \
- "setenv filesize 0; setenv blkc; setenv size \0" \
- "update_kernel=run kernel_name; if tftp ${kernel}; then " \
- "if itest ${filesize} > 0; then " \
- "setexpr size ${kernel_sectors} * " \
- __stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \
- "setexpr offset ${kernel_start} * " \
- __stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \
- "if itest ${filesize} <= ${size}; then " \
- "sf probe; " \
- "sf erase ${offset} ${size}; " \
- "sf write ${loadaddr} ${offset} " \
- "${filesize}; " \
- "fi; " \
- "fi; fi; " \
- "setenv filesize 0; setenv size ; setenv offset\0" \
- "update_fdt=if tftp ${fdt_file}; then " \
- "if itest ${filesize} > 0; then " \
- "setexpr size ${fdt_sectors} * " \
- __stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \
- "setexpr offset ${fdt_start} * " \
- __stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \
- "if itest ${filesize} <= ${size}; then " \
- "sf probe; " \
- "sf erase ${offset} ${size}; " \
- "sf write ${loadaddr} ${offset} " \
- "${filesize}; " \
- "fi; " \
- "fi; fi; " \
- "setenv filesize 0; setenv size ; setenv offset\0" \
- "loadimage=sf probe; " \
- "setexpr size ${kernel_sectors} * " \
- __stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \
- "setexpr offset ${kernel_start} * " \
- __stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \
- "sf read ${loadaddr} ${offset} ${size}; " \
- "setenv size ; setenv offset\0" \
- "loadfdt=sf probe; " \
- "setexpr size ${fdt_sectors} * " \
- __stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \
- "setexpr offset ${fdt_start} * " \
- __stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \
- "sf read ${fdt_addr} ${offset} ${size}; " \
- "setenv size ; setenv offset\0" \
-
-#define CONFIG_BOOTCOMMAND \
- "sf probe; run mmcboot; run netboot; run panicboot" \
-
-#else
-
-#error "need to define boot source"
-
-#endif
-
-/* 128 MiB offset as in ARM related docu for linux suggested */
-#define TQMA6_FDT_ADDRESS 0x18000000
-
-/* set to a resonable value, changeable by user */
-#define TQMA6_CMA_SIZE 160M
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "board=tqma6\0" \
- "uimage=uImage\0" \
- "zimage=zImage\0" \
- "boot_type=bootz\0" \
- "kernel_name=if test \"${boot_type}\" != bootz; then " \
- "setenv kernel ${uimage}; " \
- "else setenv kernel ${zimage}; fi\0" \
- "uboot=u-boot.imx\0" \
- "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
- "fdt_addr="__stringify(TQMA6_FDT_ADDRESS)"\0" \
- "console=" CONSOLE_DEV "\0" \
- "cma_size="__stringify(TQMA6_CMA_SIZE)"\0" \
- "fdt_high=0xffffffff\0" \
- "initrd_high=0xffffffff\0" \
- "rootfsmode=ro\0" \
- "addcma=setenv bootargs ${bootargs} cma=${cma_size}\0" \
- "addtty=setenv bootargs ${bootargs} console=${console},${baudrate}\0" \
- "addfb=setenv bootargs ${bootargs} " \
- "imx-fbdev.legacyfb_depth=32 consoleblank=0\0" \
- "mmcpart=2\0" \
- "mmcblkdev=0\0" \
- "mmcargs=run addmmc addtty addfb addcma\0" \
- "addmmc=setenv bootargs ${bootargs} " \
- "root=/dev/mmcblk${mmcblkdev}p${mmcpart} ${rootfsmode} " \
- "rootwait\0" \
- "mmcboot=echo Booting from mmc ...; " \
- "setenv bootargs; " \
- "run mmcargs; " \
- "run loadimage; " \
- "if run loadfdt; then " \
- "echo boot device tree kernel ...; " \
- "${boot_type} ${loadaddr} - ${fdt_addr}; " \
- "else " \
- "${boot_type}; " \
- "fi;\0" \
- "setenv bootargs \0" \
- "netdev=eth0\0" \
- "rootpath=/srv/nfs/tqma6\0" \
- "ipmode=static\0" \
- "netargs=run addnfs addip addtty addfb addcma\0" \
- "addnfs=setenv bootargs ${bootargs} " \
- "root=/dev/nfs rw " \
- "nfsroot=${serverip}:${rootpath},v3,tcp;\0" \
- "addip_static=setenv bootargs ${bootargs} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \
- "${hostname}:${netdev}:off\0" \
- "addip_dynamic=setenv bootargs ${bootargs} ip=dhcp\0" \
- "addip=if test \"${ipmode}\" != static; then " \
- "run addip_dynamic; else run addip_static; fi\0" \
- "set_getcmd=if test \"${ipmode}\" != static; then " \
- "setenv getcmd dhcp; setenv autoload yes; " \
- "else setenv getcmd tftp; setenv autoload no; fi\0" \
- "netboot=echo Booting from net ...; " \
- "run kernel_name; " \
- "run set_getcmd; " \
- "setenv bootargs; " \
- "run netargs; " \
- "if ${getcmd} ${kernel}; then " \
- "if ${getcmd} ${fdt_addr} ${fdt_file}; then " \
- "${boot_type} ${loadaddr} - ${fdt_addr}; " \
- "fi; " \
- "fi; " \
- "echo ... failed\0" \
- "panicboot=echo No boot device !!! reset\0" \
- TQMA6_EXTRA_BOOTDEV_ENV_SETTINGS \
-
-/* Physical Memory Map */
-#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
-#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
-#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
-
-#define CONFIG_SYS_INIT_SP_OFFSET \
- (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
-/*
- * All the defines above are for the TQMa6 SoM
- *
- * Now include the baseboard specific configuration
- */
-#ifdef CONFIG_MBA6
-#include "tqma6_mba6.h"
-#elif CONFIG_WRU4
-#include "tqma6_wru4.h"
-#else
-#error "No baseboard for the TQMa6 defined!"
-#endif
-
-/* Support at least the sensor on TQMa6 SOM */
-
-#endif /* __CONFIG_H */
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-02 07:36:11 +0000