diff options
Diffstat (limited to 'include/configs/trats2.h')
| -rw-r--r-- | include/configs/trats2.h | 178 |
1 files changed, 0 insertions, 178 deletions
diff --git a/include/configs/trats2.h b/include/configs/trats2.h deleted file mode 100644 index 9c6b2bb..0000000 --- a/include/configs/trats2.h +++ /dev/null @@ -1,178 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2013 Samsung Electronics - * Sanghee Kim <sh0130.kim@samsung.com> - * Piotr Wilczek <p.wilczek@samsung.com> - * - * Configuation settings for the SAMSUNG TRATS2 (EXYNOS4412) board. - */ - -#ifndef __CONFIG_TRATS2_H -#define __CONFIG_TRATS2_H - -#include <configs/exynos4-common.h> - -#define CONFIG_TIZEN /* TIZEN lib */ - -#define CONFIG_SYS_L2CACHE_OFF -#ifndef CONFIG_SYS_L2CACHE_OFF -#define CONFIG_SYS_L2_PL310 -#define CONFIG_SYS_PL310_BASE 0x10502000 -#endif - -/* TRATS2 has 4 banks of DRAM */ -#define CONFIG_SYS_SDRAM_BASE 0x40000000 -#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE -#define SDRAM_BANK_SIZE (256 << 20) /* 256 MB */ -/* memtest works on */ -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5E00000) -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000) - -/* select serial console configuration */ - -/* Console configuration */ - -#define CONFIG_BOOTCOMMAND "run autoboot" -#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0" - -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \ - - GENERATED_GBL_DATA_SIZE) - -#define CONFIG_SYS_MEM_TOP_HIDE (1 << 20) /* ram console */ - -#define CONFIG_SYS_MONITOR_BASE 0x00000000 - -#define CONFIG_SYS_MMC_ENV_DEV CONFIG_MMC_DEFAULT_DEV -#define CONFIG_ENV_SIZE 4096 -#define CONFIG_ENV_OFFSET ((32 - 4) << 10) /* 32KiB - 4KiB */ - -#define CONFIG_ENV_OVERWRITE - -/* Tizen - partitions definitions */ -#define PARTS_CSA "csa-mmc" -#define PARTS_BOOT "boot" -#define PARTS_QBOOT "qboot" -#define PARTS_CSC "csc" -#define PARTS_ROOT "platform" -#define PARTS_DATA "data" -#define PARTS_UMS "ums" - -#define PARTS_DEFAULT \ - "uuid_disk=${uuid_gpt_disk};" \ - "name="PARTS_CSA",start=5MiB,size=8MiB,uuid=${uuid_gpt_"PARTS_CSA"};" \ - "name="PARTS_BOOT",size=60MiB,uuid=${uuid_gpt_"PARTS_BOOT"};" \ - "name="PARTS_QBOOT",size=100MiB,uuid=${uuid_gpt_"PARTS_QBOOT"};" \ - "name="PARTS_CSC",size=150MiB,uuid=${uuid_gpt_"PARTS_CSC"};" \ - "name="PARTS_ROOT",size=1536MiB,uuid=${uuid_gpt_"PARTS_ROOT"};" \ - "name="PARTS_DATA",size=3000MiB,uuid=${uuid_gpt_"PARTS_DATA"};" \ - "name="PARTS_UMS",size=-,uuid=${uuid_gpt_"PARTS_UMS"}\0" \ - -#define CONFIG_DFU_ALT \ - "u-boot raw 0x80 0x800;" \ - "/uImage ext4 0 2;" \ - "/modem.bin ext4 0 2;" \ - "/exynos4412-trats2.dtb ext4 0 2;" \ - ""PARTS_CSA" part 0 1;" \ - ""PARTS_BOOT" part 0 2;" \ - ""PARTS_QBOOT" part 0 3;" \ - ""PARTS_CSC" part 0 4;" \ - ""PARTS_ROOT" part 0 5;" \ - ""PARTS_DATA" part 0 6;" \ - ""PARTS_UMS" part 0 7;" \ - "params.bin raw 0x38 0x8;" \ - "/Image.itb ext4 0 2\0" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "bootk=" \ - "run loaduimage;" \ - "if run loaddtb; then " \ - "bootm 0x40007FC0 - ${fdtaddr};" \ - "fi;" \ - "bootm 0x40007FC0;\0" \ - "updatebackup=" \ - "mmc dev 0 2; mmc write 0x51000000 0 0x800;" \ - " mmc dev 0 0\0" \ - "updatebootb=" \ - "mmc read 0x51000000 0x80 0x800; run updatebackup\0" \ - "mmcboot=" \ - "setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \ - "${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \ - "run bootk\0" \ - "bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \ - "boottrace=setenv opts initcall_debug; run bootcmd\0" \ - "verify=n\0" \ - "rootfstype=ext4\0" \ - "console=" CONFIG_DEFAULT_CONSOLE \ - "kernelname=uImage\0" \ - "loaduimage=ext4load mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 " \ - "${kernelname}\0" \ - "loaddtb=ext4load mmc ${mmcdev}:${mmcbootpart} ${fdtaddr} " \ - "${fdtfile}\0" \ - "mmcdev=" __stringify(CONFIG_MMC_DEFAULT_DEV) "\0" \ - "mmcbootpart=2\0" \ - "mmcrootpart=5\0" \ - "opts=always_resume=1\0" \ - "partitions=" PARTS_DEFAULT \ - "dfu_alt_info=" CONFIG_DFU_ALT \ - "uartpath=ap\0" \ - "usbpath=ap\0" \ - "consoleon=set console console=ttySAC2,115200n8; save; reset\0" \ - "consoleoff=set console console=ram; save; reset\0" \ - "spladdr=0x40000100\0" \ - "splsize=0x200\0" \ - "splfile=falcon.bin\0" \ - "spl_export=" \ - "setexpr spl_imgsize ${splsize} + 8 ;" \ - "setenv spl_imgsize 0x${spl_imgsize};" \ - "setexpr spl_imgaddr ${spladdr} - 8 ;" \ - "setexpr spl_addr_tmp ${spladdr} - 4 ;" \ - "mw.b ${spl_imgaddr} 0x00 ${spl_imgsize};run loaduimage;" \ - "setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \ - "${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo};" \ - "spl export atags 0x40007FC0;" \ - "crc32 ${spladdr} ${splsize} ${spl_imgaddr};" \ - "mw.l ${spl_addr_tmp} ${splsize};" \ - "ext4write mmc ${mmcdev}:${mmcbootpart}" \ - " /${splfile} ${spl_imgaddr} ${spl_imgsize};" \ - "setenv spl_imgsize;" \ - "setenv spl_imgaddr;" \ - "setenv spl_addr_tmp;\0" \ - CONFIG_EXTRA_ENV_ITB \ - "fdtaddr=40800000\0" \ - -/* GPT */ - -/* Security subsystem - enable hw_rand() */ -#define CONFIG_EXYNOS_ACE_SHA - -/* Common misc for Samsung */ -#define CONFIG_MISC_COMMON - -/* Download menu - Samsung common */ -#define CONFIG_LCD_MENU - -/* Download menu - definitions for check keys */ -#ifndef __ASSEMBLY__ - -#define KEY_PWR_PMIC_NAME "MAX77686_PMIC" -#define KEY_PWR_STATUS_REG MAX77686_REG_PMIC_STATUS1 -#define KEY_PWR_STATUS_MASK (1 << 0) -#define KEY_PWR_INTERRUPT_REG MAX77686_REG_PMIC_INT1 -#define KEY_PWR_INTERRUPT_MASK (1 << 1) - -#define KEY_VOL_UP_GPIO EXYNOS4X12_GPIO_X22 -#define KEY_VOL_DOWN_GPIO EXYNOS4X12_GPIO_X33 -#endif /* __ASSEMBLY__ */ - -/* LCD console */ -#define LCD_BPP LCD_COLOR16 - -/* LCD */ -#define CONFIG_BMP_16BPP -#define CONFIG_FB_ADDR 0x52504000 -#define CONFIG_EXYNOS_MIPI_DSIM -#define CONFIG_VIDEO_BMP_GZIP -#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 160 * 4) + 54) - -#endif /* __CONFIG_H */ |