1 files changed, 0 insertions, 95 deletions
diff --git a/include/configs/udoo.h b/include/configs/udoo.h
deleted file mode 100644
index 3378b4a..0000000
--- a/include/configs/udoo.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2013 Freescale Semiconductor, Inc.
- *
- * Configuration settings for Udoo board.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include "mx6_common.h"
-
-#include "imx6_spl.h"
-
-/* Provide the MACH_TYPE value that the vendor kernel requires. */
-#define CONFIG_MACH_TYPE		4800
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		(2 * SZ_1M)
-
-#define CONFIG_MXC_UART
-#define CONFIG_MXC_UART_BASE		UART2_BASE
-
-/* SATA Configs */
-
-#ifdef CONFIG_CMD_SATA
-#define CONFIG_SYS_SATA_MAX_DEVICE	1
-#define CONFIG_DWC_AHSATA_PORT_ID	0
-#define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
-#define CONFIG_LBA48
-#endif
-
-/* Network support */
-
-#define CONFIG_FEC_MXC
-#define IMX_FEC_BASE                    ENET_BASE_ADDR
-#define CONFIG_FEC_XCV_TYPE             RGMII
-#define CONFIG_ETHPRIME                 "FEC"
-#define CONFIG_FEC_MXC_PHYADDR          6
-
-#define CONFIG_SYS_MEMTEST_START	0x10000000
-#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
-
-/* MMC Configuration */
-#define CONFIG_SYS_FSL_ESDHC_ADDR	0
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"console=ttymxc1,115200\0" \
-	"fdt_high=0xffffffff\0" \
-	"initrd_high=0xffffffff\0" \
-	"fdtfile=undefined\0" \
-	"fdt_addr=0x18000000\0" \
-	"fdt_addr_r=0x18000000\0" \
-	"ip_dyn=yes\0" \
-	"mmcdev=0\0" \
-	"mmcrootfstype=ext4\0" \
-	"findfdt="\
-		"if test ${board_rev} = MX6Q; then " \
-			"setenv fdtfile imx6q-udoo.dtb; fi; " \
-		"if test ${board_rev} = MX6DL; then " \
-			"setenv fdtfile imx6dl-udoo.dtb; fi; " \
-		"if test ${fdtfile} = undefined; then " \
-			"echo WARNING: Could not determine dtb to use; fi\0" \
-	"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
-	"pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
-	"ramdisk_addr_r=0x13000000\0" \
-	"scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
-	BOOTENV
-
-#define BOOT_TARGET_DEVICES(func) \
-	func(MMC, mmc, 0) \
-	func(SATA, sata, 0) \
-	func(DHCP, dhcp, na)
-
-#include <config_distro_bootcmd.h>
-
-/* Physical Memory Map */
-#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
-
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
-#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
-#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
-
-#define CONFIG_SYS_INIT_SP_OFFSET \
-	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
-/* Environment organization */
-#define CONFIG_ENV_SIZE			(8 * 1024)
-
-#define CONFIG_ENV_OFFSET		(6 * 64 * 1024)
-#define CONFIG_SYS_MMC_ENV_DEV		0
-
-#endif			       /* __CONFIG_H * */