diff options
Diffstat (limited to 'include/configs/usb_a9263.h')
| -rw-r--r-- | include/configs/usb_a9263.h | 89 |
1 files changed, 0 insertions, 89 deletions
diff --git a/include/configs/usb_a9263.h b/include/configs/usb_a9263.h deleted file mode 100644 index c0ba647..0000000 --- a/include/configs/usb_a9263.h +++ /dev/null @@ -1,89 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2007-2013 - * Stelian Pop <stelian.pop@leadtechdesign.com> - * Lead Tech Design <www.leadtechdesign.com> - * Thomas Petazzoni, Free Electrons, <thomas.petazzoni@free-electrons.com> - * Mateusz Kulikowski <mateusz.kulikowski@gmail.com> - * - * Settings for Calao USB-A9263 board - * - * U-Boot image has to be less than 200704 bytes, otherwise at91bootstrap - * installed on board will not be able to load it properly. - */ - -#ifndef __CONFIG_H -#define __CONFIG_H -#include <asm/hardware.h> - -/* ARM asynchronous clock */ -#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */ -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 - -#define CONFIG_MACH_TYPE MACH_TYPE_USB_A9263 - -#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG - -#define CONFIG_SKIP_LOWLEVEL_INIT - -/* - * Hardware drivers - */ -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE - -/* SDRAM */ -#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1 -#define CONFIG_SYS_SDRAM_SIZE 0x04000000 - -#define CONFIG_SYS_INIT_SP_ADDR \ - (ATMEL_BASE_SRAM1 + 16 * 1024 - GENERATED_GBL_DATA_SIZE) - -/* NAND flash */ -#ifdef CONFIG_CMD_NAND -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 -/* our ALE is AD21 */ -#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) -/* our CLE is AD22 */ -#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) -#define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PD(15) -#define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PA(22) -#endif - -/* Ethernet */ -#define CONFIG_MACB -#define CONFIG_RMII -#define CONFIG_NET_RETRY_COUNT 20 -#define CONFIG_AT91_WANTS_COMMON_PHY - -/* USB */ -#ifdef CONFIG_CMD_USB -#define CONFIG_USB_ATMEL -#define CONFIG_USB_OHCI_NEW -#define CONFIG_SYS_USB_OHCI_CPU_INIT -#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00a00000 -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263" -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 -#endif - -#define CONFIG_SYS_LOAD_ADDR 0x22000000 - -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_MEMTEST_END 0x23e00000 - -/* bootstrap + u-boot + env + linux in dataflash on CS0 */ -#define CONFIG_BOOTCOMMAND "nboot 21000000 0" -#define CONFIG_EXTRA_ENV_SETTINGS \ - "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) - -#endif |