diff options
Diffstat (limited to 'include/configs/vct.h')
| -rw-r--r-- | include/configs/vct.h | 202 |
1 files changed, 0 insertions, 202 deletions
diff --git a/include/configs/vct.h b/include/configs/vct.h deleted file mode 100644 index 5710715..0000000 --- a/include/configs/vct.h +++ /dev/null @@ -1,202 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2008 Stefan Roese <sr@denx.de>, DENX Software Engineering - */ - -/* - * This file contains the configuration parameters for the VCT board - * family: - * - * vct_premium - * vct_premium_small - * vct_premium_onenand - * vct_premium_onenand_small - * vct_platinum - * vct_platinum_small - * vct_platinum_onenand - * vct_platinum_onenand_small - * vct_platinumavc - * vct_platinumavc_small - * vct_platinumavc_onenand - * vct_platinumavc_onenand_small - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CPU_CLOCK_RATE 324000000 /* Clock for the MIPS core */ -#define CONFIG_SYS_MIPS_TIMER_FREQ (CPU_CLOCK_RATE / 2) - -#define CONFIG_SKIP_LOWLEVEL_INIT /* SDRAM is initialized by the bootstrap code */ - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MONITOR_LEN (256 << 10) -#define CONFIG_SYS_MALLOC_LEN (1 << 20) -#define CONFIG_SYS_BOOTPARAMS_LEN (128 << 10) -#define CONFIG_SYS_INIT_SP_OFFSET 0x400000 - -#if !defined(CONFIG_VCT_NAND) && !defined(CONFIG_VCT_ONENAND) -#define CONFIG_VCT_NOR -#endif - -/* - * UART - */ -#ifdef CONFIG_VCT_PLATINUMAVC -#define UART_1_BASE 0xBDC30000 -#else -#define UART_1_BASE 0xBF89C000 -#endif - -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE -4 -#define CONFIG_SYS_NS16550_COM1 UART_1_BASE -#define CONFIG_SYS_NS16550_CLK 921600 - -/* - * SDRAM - */ -#define CONFIG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_SYS_MBYTES_SDRAM 128 -#define CONFIG_SYS_MEMTEST_START 0x80200000 -#define CONFIG_SYS_MEMTEST_END 0x80400000 -#define CONFIG_SYS_LOAD_ADDR 0x80400000 /* default load address */ - -#if defined(CONFIG_VCT_PREMIUM) || defined(CONFIG_VCT_PLATINUM) -#define CONFIG_NET_RETRY_COUNT 20 -#endif - -/* - * Commands - */ -#if defined(CONFIG_CMD_USB) - -/* - * USB/EHCI - */ -#define CONFIG_USB_EHCI_VCT /* on VCT platform */ -#define CONFIG_EHCI_MMIO_BIG_ENDIAN -#define CONFIG_EHCI_DESC_BIG_ENDIAN -#define CONFIG_EHCI_IS_TDI -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* re-init HCD after CMD_RESET */ -#endif /* CONFIG_CMD_USB */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ -#define CONFIG_TIMESTAMP /* Print image info with timestamp */ - -/* - * FLASH and environment organization - */ -#if defined(CONFIG_VCT_NOR) -#define CONFIG_FLASH_NOT_MEM_MAPPED - -/* - * We need special accessor functions for the CFI FLASH driver. This - * can be enabled via the CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS option. - */ -#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS - -/* - * For the non-memory-mapped NOR FLASH, we need to define the - * NOR FLASH area. This can't be detected via the addr2info() - * function, since we check for flash access in the very early - * U-Boot code, before the NOR FLASH is detected. - */ -#define CONFIG_FLASH_BASE 0xb0000000 -#define CONFIG_FLASH_END 0xbfffffff - -/* - * CFI driver settings - */ -#define CONFIG_SYS_FLASH_CFI_AMD_RESET 1 /* Use AMD (Spansion) reset cmd */ -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT /* no byte writes on IXP4xx */ - -#define CONFIG_SYS_FLASH_BASE 0xb0000000 -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#ifdef CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN) -#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ - -/* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) -#endif /* CONFIG_ENV_IS_IN_FLASH */ -#endif /* CONFIG_VCT_NOR */ - -#if defined(CONFIG_VCT_ONENAND) -#define CONFIG_USE_ONENAND_BOARD_INIT -#define CONFIG_SYS_ONENAND_BASE 0x00000000 /* this is not real address */ -#define CONFIG_SYS_FLASH_BASE 0x00000000 -#define CONFIG_ENV_ADDR (128 << 10) /* after compr. U-Boot image */ -#define CONFIG_ENV_SIZE (128 << 10) /* erase size */ -#endif /* CONFIG_VCT_ONENAND */ - -/* - * I2C/EEPROM - */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ -#define CONFIG_SYS_I2C_SOFT_SPEED 83000 /* 83 kHz is supposed to work */ -#define CONFIG_SYS_I2C_SOFT_SLAVE 0x7f - -/* - * Software (bit-bang) I2C driver configuration - */ -#define CONFIG_SYS_GPIO_I2C_SCL 11 -#define CONFIG_SYS_GPIO_I2C_SDA 10 - -#ifndef __ASSEMBLY__ -int vct_gpio_dir(int pin, int dir); -void vct_gpio_set(int pin, int val); -int vct_gpio_get(int pin); -#endif - -#define I2C_INIT vct_gpio_dir(CONFIG_SYS_GPIO_I2C_SCL, 1) -#define I2C_ACTIVE vct_gpio_dir(CONFIG_SYS_GPIO_I2C_SDA, 1) -#define I2C_TRISTATE vct_gpio_dir(CONFIG_SYS_GPIO_I2C_SDA, 0) -#define I2C_READ vct_gpio_get(CONFIG_SYS_GPIO_I2C_SDA) -#define I2C_SDA(bit) vct_gpio_set(CONFIG_SYS_GPIO_I2C_SDA, bit) -#define I2C_SCL(bit) vct_gpio_set(CONFIG_SYS_GPIO_I2C_SCL, bit) -#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ - -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -/* CAT24WC32 */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 /* The Catalyst CAT24WC32 has */ - /* 32 byte page write mode using*/ - /* last 5 bits of the address */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ - -#define CONFIG_BOOTCOMMAND "run test3" - -/* - * UBI configuration - */ - -/* - * We need a small, stripped down image to fit into the first 128k OneNAND - * erase block (gzipped). This image only needs basic commands for FLASH - * (NOR/OneNAND) usage and Linux kernel booting. - */ -#if defined(CONFIG_VCT_SMALL_IMAGE) -#undef CONFIG_SYS_I2C_SOFT -#undef CONFIG_SOURCE -#undef CONFIG_TIMESTAMP -#endif /* CONFIG_VCT_SMALL_IMAGE */ - -#endif /* __CONFIG_H */ |