diff options
Diffstat (limited to 'include/configs/vexpress_aemv8a.h')
| -rw-r--r-- | include/configs/vexpress_aemv8a.h | 222 |
1 files changed, 0 insertions, 222 deletions
diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8a.h deleted file mode 100644 index b2c14f9..0000000 --- a/include/configs/vexpress_aemv8a.h +++ /dev/null @@ -1,222 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Configuration for Versatile Express. Parts were derived from other ARM - * configurations. - */ - -#ifndef __VEXPRESS_AEMV8A_H -#define __VEXPRESS_AEMV8A_H - -#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP -#ifndef CONFIG_SEMIHOSTING -#error CONFIG_TARGET_VEXPRESS64_BASE_FVP requires CONFIG_SEMIHOSTING -#endif -#endif - -#define CONFIG_REMAKE_ELF - -/* Link Definitions */ -#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP -/* ATF loads u-boot here for BASE_FVP model */ -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x03f00000) -#elif CONFIG_TARGET_VEXPRESS64_JUNO -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) -#endif - -#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ - -/* CS register bases for the original memory map. */ -#define V2M_PA_CS0 0x00000000 -#define V2M_PA_CS1 0x14000000 -#define V2M_PA_CS2 0x18000000 -#define V2M_PA_CS3 0x1c000000 -#define V2M_PA_CS4 0x0c000000 -#define V2M_PA_CS5 0x10000000 - -#define V2M_PERIPH_OFFSET(x) (x << 16) -#define V2M_SYSREGS (V2M_PA_CS3 + V2M_PERIPH_OFFSET(1)) -#define V2M_SYSCTL (V2M_PA_CS3 + V2M_PERIPH_OFFSET(2)) -#define V2M_SERIAL_BUS_PCI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(3)) - -#define V2M_BASE 0x80000000 - -/* Common peripherals relative to CS7. */ -#define V2M_AACI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(4)) -#define V2M_MMCI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(5)) -#define V2M_KMI0 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(6)) -#define V2M_KMI1 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(7)) - -#ifdef CONFIG_TARGET_VEXPRESS64_JUNO -#define V2M_UART0 0x7ff80000 -#define V2M_UART1 0x7ff70000 -#else /* Not Juno */ -#define V2M_UART0 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(9)) -#define V2M_UART1 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(10)) -#define V2M_UART2 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(11)) -#define V2M_UART3 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(12)) -#endif - -#define V2M_WDT (V2M_PA_CS3 + V2M_PERIPH_OFFSET(15)) - -#define V2M_TIMER01 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(17)) -#define V2M_TIMER23 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(18)) - -#define V2M_SERIAL_BUS_DVI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(22)) -#define V2M_RTC (V2M_PA_CS3 + V2M_PERIPH_OFFSET(23)) - -#define V2M_CF (V2M_PA_CS3 + V2M_PERIPH_OFFSET(26)) - -#define V2M_CLCD (V2M_PA_CS3 + V2M_PERIPH_OFFSET(31)) - -/* System register offsets. */ -#define V2M_SYS_CFGDATA (V2M_SYSREGS + 0x0a0) -#define V2M_SYS_CFGCTRL (V2M_SYSREGS + 0x0a4) -#define V2M_SYS_CFGSTAT (V2M_SYSREGS + 0x0a8) - -/* Generic Timer Definitions */ -#define COUNTER_FREQUENCY (0x1800000) /* 24MHz */ - -/* Generic Interrupt Controller Definitions */ -#ifdef CONFIG_GICV3 -#define GICD_BASE (0x2f000000) -#define GICR_BASE (0x2f100000) -#else - -#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP -#define GICD_BASE (0x2f000000) -#define GICC_BASE (0x2c000000) -#elif CONFIG_TARGET_VEXPRESS64_JUNO -#define GICD_BASE (0x2C010000) -#define GICC_BASE (0x2C02f000) -#endif -#endif /* !CONFIG_GICV3 */ - -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (8 << 20)) - -#ifndef CONFIG_TARGET_VEXPRESS64_JUNO -/* The Vexpress64 simulators use SMSC91C111 */ -#define CONFIG_SMC91111 1 -#define CONFIG_SMC91111_BASE (0x01A000000) -#endif - -/* PL011 Serial Configuration */ -#ifdef CONFIG_TARGET_VEXPRESS64_JUNO -#define CONFIG_PL011_CLOCK 7273800 -#else -#define CONFIG_PL011_CLOCK 24000000 -#endif - -/* BOOTP options */ -#define CONFIG_BOOTP_BOOTFILESIZE - -/* Miscellaneous configurable options */ -#define CONFIG_SYS_LOAD_ADDR (V2M_BASE + 0x10000000) - -/* Physical Memory Map */ -#define PHYS_SDRAM_1 (V2M_BASE) /* SDRAM Bank #1 */ -/* Top 16MB reserved for secure world use */ -#define DRAM_SEC_SIZE 0x01000000 -#define PHYS_SDRAM_1_SIZE 0x80000000 - DRAM_SEC_SIZE -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 - -#ifdef CONFIG_TARGET_VEXPRESS64_JUNO -#define PHYS_SDRAM_2 (0x880000000) -#define PHYS_SDRAM_2_SIZE 0x180000000 -#endif - -/* Enable memtest */ -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1 -#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE) - -/* Initial environment variables */ -#ifdef CONFIG_TARGET_VEXPRESS64_JUNO -/* - * Defines where the kernel and FDT exist in NOR flash and where it will - * be copied into DRAM - */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "kernel_name=norkern\0" \ - "kernel_alt_name=Image\0" \ - "kernel_addr=0x80080000\0" \ - "initrd_name=ramdisk.img\0" \ - "initrd_addr=0x84000000\0" \ - "fdtfile=board.dtb\0" \ - "fdt_alt_name=juno\0" \ - "fdt_addr=0x83000000\0" \ - "fdt_high=0xffffffffffffffff\0" \ - "initrd_high=0xffffffffffffffff\0" \ - -/* Copy the kernel and FDT to DRAM memory and boot */ -#define CONFIG_BOOTCOMMAND "afs load ${kernel_name} ${kernel_addr} ; " \ - "if test $? -eq 1; then "\ - " echo Loading ${kernel_alt_name} instead of "\ - "${kernel_name}; "\ - " afs load ${kernel_alt_name} ${kernel_addr};"\ - "fi ; "\ - "afs load ${fdtfile} ${fdt_addr} ; " \ - "if test $? -eq 1; then "\ - " echo Loading ${fdt_alt_name} instead of "\ - "${fdtfile}; "\ - " afs load ${fdt_alt_name} ${fdt_addr}; "\ - "fi ; "\ - "fdt addr ${fdt_addr}; fdt resize; " \ - "if afs load ${initrd_name} ${initrd_addr} ; "\ - "then "\ - " setenv initrd_param ${initrd_addr}; "\ - " else setenv initrd_param -; "\ - "fi ; " \ - "booti ${kernel_addr} ${initrd_param} ${fdt_addr}" - - -#elif CONFIG_TARGET_VEXPRESS64_BASE_FVP -#define CONFIG_EXTRA_ENV_SETTINGS \ - "kernel_name=Image\0" \ - "kernel_addr=0x80080000\0" \ - "initrd_name=ramdisk.img\0" \ - "initrd_addr=0x88000000\0" \ - "fdtfile=devtree.dtb\0" \ - "fdt_addr=0x83000000\0" \ - "fdt_high=0xffffffffffffffff\0" \ - "initrd_high=0xffffffffffffffff\0" - -#define CONFIG_BOOTCOMMAND "smhload ${kernel_name} ${kernel_addr}; " \ - "smhload ${fdtfile} ${fdt_addr}; " \ - "smhload ${initrd_name} ${initrd_addr} "\ - "initrd_end; " \ - "fdt addr ${fdt_addr}; fdt resize; " \ - "fdt chosen ${initrd_addr} ${initrd_end}; " \ - "booti $kernel_addr - $fdt_addr" - - -#endif - -/* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ -#define CONFIG_SYS_MAXARGS 64 /* max command args */ - -#ifdef CONFIG_TARGET_VEXPRESS64_JUNO -#define CONFIG_SYS_FLASH_BASE 0x08000000 -/* 255 x 256KiB sectors + 4 x 64KiB sectors at the end = 259 */ -#define CONFIG_SYS_MAX_FLASH_SECT 259 -/* Store environment at top of flash in the same location as blank.img */ -/* in the Juno firmware. */ -#define CONFIG_ENV_ADDR 0x0BFC0000 -#define CONFIG_ENV_SECT_SIZE 0x00010000 -#else -#define CONFIG_SYS_FLASH_BASE 0x0C000000 -/* 256 x 256KiB sectors */ -#define CONFIG_SYS_MAX_FLASH_SECT 256 -/* Store environment at top of flash */ -#define CONFIG_ENV_ADDR 0x0FFC0000 -#define CONFIG_ENV_SECT_SIZE 0x00040000 -#endif - -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_32BIT -#define CONFIG_SYS_MAX_FLASH_BANKS 1 - -#define CONFIG_SYS_FLASH_EMPTY_INFO /* flinfo indicates empty blocks */ -#define FLASH_MAX_SECTOR_SIZE 0x00040000 -#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE - -#endif /* __VEXPRESS_AEMV8A_H */ |