1 files changed, 0 insertions, 138 deletions
diff --git a/include/configs/wb45n.h b/include/configs/wb45n.h
deleted file mode 100644
index 43de2e1..0000000
--- a/include/configs/wb45n.h
+++ /dev/null
@@ -1,138 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Configuation settings for the WB45N CPU Module.
- */
-
-#ifndef __CONFIG_H__
-#define __CONFIG_H__
-
-#include <asm/hardware.h>
-
-/* ARM asynchronous clock */
-#define CONFIG_SYS_AT91_SLOW_CLOCK  32768
-#define CONFIG_SYS_AT91_MAIN_CLOCK  12000000	/* 12 MHz crystal */
-
-#define CONFIG_CMDLINE_TAG	/* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
-/* general purpose I/O */
-#define CONFIG_ATMEL_LEGACY	/* required until (g)pio is fixed */
-#define CONFIG_AT91_GPIO
-
-/* serial console */
-#define CONFIG_ATMEL_USART
-#define CONFIG_USART_BASE   ATMEL_BASE_DBGU
-#define CONFIG_USART_ID     ATMEL_ID_SYS
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-/* SDRAM */
-#define CONFIG_SYS_SDRAM_BASE       0x20000000
-#define CONFIG_SYS_SDRAM_SIZE       0x04000000	/* 64 MB */
-
-#define CONFIG_SYS_INIT_SP_ADDR \
-    (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
-
-/* NAND flash */
-#define CONFIG_SYS_MAX_NAND_DEVICE  1
-#define CONFIG_SYS_NAND_BASE        0x40000000
-/* our ALE is AD21 */
-#define CONFIG_SYS_NAND_MASK_ALE    (1 << 21)
-/* our CLE is AD22 */
-#define CONFIG_SYS_NAND_MASK_CLE    (1 << 22)
-#define CONFIG_SYS_NAND_ENABLE_PIN  AT91_PIN_PD4
-#define CONFIG_SYS_NAND_READY_PIN   AT91_PIN_PD5
-
-#define CONFIG_RBTREE
-#define CONFIG_LZO
-
-/* Ethernet */
-#define CONFIG_MACB
-#define CONFIG_RMII
-#define CONFIG_NET_RETRY_COUNT      20
-#define CONFIG_MACB_SEARCH_PHY
-#define CONFIG_ETHADDR              C0:EE:40:00:00:00
-#define CONFIG_ENV_OVERWRITE        1
-
-/* System */
-#define CONFIG_SYS_LOAD_ADDR        0x22000000	/* load address */
-#define CONFIG_SYS_MEMTEST_START    CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END      0x23e00000
-
-#ifdef CONFIG_SYS_USE_NANDFLASH
-/* bootstrap + u-boot + env + linux in nandflash */
-#define CONFIG_ENV_OFFSET           0xa0000
-#define CONFIG_ENV_OFFSET_REDUND    0xc0000
-#define CONFIG_ENV_SIZE             0x20000	/* 1 block = 128 kB */
-
-#define CONFIG_BOOTCOMMAND  "nand read 0x22000000 0xe0000 0x280000; " \
-    "run _mtd; bootm"
-
-#define MTDIDS_DEFAULT      "nand0=atmel_nand"
-#define MTDPARTS_DEFAULT    "mtdparts=atmel_nand:" \
-                            "128K(at91bs)," \
-                            "512K(u-boot)," \
-                            "128K(u-boot-env)," \
-                            "128K(redund-env)," \
-                            "2560K(kernel-a)," \
-                            "2560K(kernel-b)," \
-                            "38912K(rootfs-a)," \
-                            "38912K(rootfs-b)," \
-                            "46208K(user)," \
-                            "512K(logs)"
-
-#else
-#error No boot method selected, please select 'CONFIG_SYS_USE_NANDFLASH'
-#endif
-
-#define CONFIG_BOOTARGS     "console=ttyS0,115200 earlyprintk " \
-                            "rw noinitrd mem=64M "              \
-                            "rootfstype=ubifs root=ubi0:rootfs ubi.mtd=6"
-
-#define CONFIG_EXTRA_ENV_SETTINGS       \
-    "_mtd=mtdparts default; setenv bootargs ${bootargs} ${mtdparts}\0" \
-    "autoload=no\0" \
-    "autostart=no\0" \
-    "ethaddr=" __stringify(CONFIG_ETHADDR) "\0" \
-    "\0"
-
-#define CONFIG_SYS_CBSIZE   256
-#define CONFIG_SYS_MAXARGS  16
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN       (512 * 1024 + 0x1000)
-
-/* SPL */
-#define CONFIG_SPL_MAX_SIZE         0x6000
-#define CONFIG_SPL_STACK            0x308000
-
-#define CONFIG_SPL_BSS_START_ADDR   0x20000000
-#define CONFIG_SPL_BSS_MAX_SIZE     0x80000
-#define CONFIG_SYS_SPL_MALLOC_START 0x20080000
-#define CONFIG_SYS_SPL_MALLOC_SIZE  0x80000
-
-#define CONFIG_SYS_MONITOR_LEN      (512 << 10)
-
-#define CONFIG_SYS_MASTER_CLOCK     132096000
-#define CONFIG_SYS_AT91_PLLA        0x20c73f03
-#define CONFIG_SYS_MCKR             0x1301
-#define CONFIG_SYS_MCKR_CSS         0x1302
-
-#define CONFIG_SPL_NAND_DRIVERS
-#define CONFIG_SPL_NAND_BASE
-#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x20000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_SIZE   0x800
-#define CONFIG_SYS_NAND_PAGE_COUNT  64
-#define CONFIG_SYS_NAND_OOBSIZE     64
-#define CONFIG_SYS_NAND_BLOCK_SIZE  0x20000
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS   0x0
-
-#endif				/* __CONFIG_H__ */