1 files changed, 0 insertions, 112 deletions
diff --git a/include/configs/wb50n.h b/include/configs/wb50n.h
deleted file mode 100644
index 6e471f6..0000000
--- a/include/configs/wb50n.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Configuation settings for the WB50N CPU Module.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <asm/hardware.h>
-
-/* ARM asynchronous clock */
-#define CONFIG_SYS_AT91_SLOW_CLOCK      32768
-#define CONFIG_SYS_AT91_MAIN_CLOCK      12000000	/* from 12 MHz crystal */
-
-#define CONFIG_CMDLINE_TAG	/* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
-
-/* general purpose I/O */
-#define CONFIG_AT91_GPIO
-
-/* serial console */
-#define CONFIG_ATMEL_USART
-#define CONFIG_USART_BASE       ATMEL_BASE_DBGU
-#define CONFIG_USART_ID         ATMEL_ID_DBGU
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-/* SDRAM */
-#define CONFIG_SYS_SDRAM_BASE       ATMEL_BASE_DDRCS
-#define CONFIG_SYS_SDRAM_SIZE       0x04000000
-
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_INIT_SP_ADDR     0x310000
-#else
-#define CONFIG_SYS_INIT_SP_ADDR \
-    (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
-#endif
-
-#define CONFIG_SYS_MEMTEST_START    0x21000000
-#define CONFIG_SYS_MEMTEST_END      0x22000000
-
-/* NAND flash */
-#define CONFIG_SYS_MAX_NAND_DEVICE  1
-#define CONFIG_SYS_NAND_BASE        ATMEL_BASE_CS3
-/* our ALE is AD21 */
-#define CONFIG_SYS_NAND_MASK_ALE    (1 << 21)
-/* our CLE is AD22 */
-#define CONFIG_SYS_NAND_MASK_CLE    (1 << 22)
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-
-/* Ethernet Hardware */
-#define CONFIG_MACB
-#define CONFIG_RMII
-#define CONFIG_NET_RETRY_COUNT      20
-#define CONFIG_MACB_SEARCH_PHY
-#define CONFIG_RGMII
-#define CONFIG_ETHADDR              C0:EE:40:00:00:00
-#define CONFIG_ENV_OVERWRITE        1
-
-#define CONFIG_SYS_LOAD_ADDR        0x22000000	/* load address */
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
-    "autoload=no\0" \
-    "autostart=no\0"
-
-/* bootstrap + u-boot + env in nandflash */
-#define CONFIG_ENV_OFFSET_REDUND    0xC0000
-#define CONFIG_BOOTCOMMAND \
-    "nand read 0x22000000 0x000e0000 0x500000; " \
-    "bootm"
-
-#define CONFIG_BOOTARGS \
-    "rw rootfstype=ubifs ubi.mtd=6 root=ubi0:rootfs"
-
-#define CONFIG_BAUDRATE             115200
-
-#define CONFIG_SYS_CBSIZE           1024
-#define CONFIG_SYS_MAXARGS          16
-#define CONFIG_SYS_PBSIZE \
-    (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN       (2 * 1024 * 1024)
-
-/* SPL */
-#define CONFIG_SPL_MAX_SIZE         0x10000
-#define CONFIG_SPL_BSS_START_ADDR   0x20000000
-#define CONFIG_SPL_BSS_MAX_SIZE     0x80000
-#define CONFIG_SYS_SPL_MALLOC_START 0x20080000
-#define CONFIG_SYS_SPL_MALLOC_SIZE  0x80000
-
-#define CONFIG_SYS_MONITOR_LEN      (512 << 10)
-
-#define CONFIG_SPL_NAND_DRIVERS
-#define CONFIG_SPL_NAND_BASE
-#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x20000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_SIZE   0x800
-#define CONFIG_SYS_NAND_PAGE_COUNT  64
-#define CONFIG_SYS_NAND_OOBSIZE     64
-#define CONFIG_SYS_NAND_BLOCK_SIZE  0x20000
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS   0x0
-
-#endif