diff options
Diffstat (limited to 'include/configs/work_92105.h')
| -rw-r--r-- | include/configs/work_92105.h | 158 |
1 files changed, 0 insertions, 158 deletions
diff --git a/include/configs/work_92105.h b/include/configs/work_92105.h deleted file mode 100644 index e260a63..0000000 --- a/include/configs/work_92105.h +++ /dev/null @@ -1,158 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * WORK Microwave work_92105 board configuration file - * - * (C) Copyright 2014 DENX Software Engineering GmbH - * Written-by: Albert ARIBAUD <albert.aribaud@3adev.fr> - */ - -#ifndef __CONFIG_WORK_92105_H__ -#define __CONFIG_WORK_92105_H__ - -/* SoC and board defines */ -#include <linux/sizes.h> -#include <asm/arch/cpu.h> - -/* - * Define work_92105 machine type by hand -- done only for compatibility - * with original board code - */ -#define CONFIG_MACH_TYPE 736 - -#if !defined(CONFIG_SPL_BUILD) -#define CONFIG_SKIP_LOWLEVEL_INIT -#endif - -/* - * Memory configurations - */ -#define CONFIG_SYS_MALLOC_LEN SZ_1M -#define CONFIG_SYS_SDRAM_BASE EMC_DYCS0_BASE -#define CONFIG_SYS_SDRAM_SIZE SZ_128M -#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + SZ_32K) -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_TEXT_BASE - SZ_1M) - -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_32K) - -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_512K \ - - GENERATED_GBL_DATA_SIZE) - -/* - * Serial Driver - */ -#define CONFIG_SYS_LPC32XX_UART 5 /* UART5 - NS16550 */ - -/* - * Ethernet Driver - */ - -#define CONFIG_PHY_SMSC -#define CONFIG_LPC32XX_ETH -#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN -/* FIXME: remove "Waiting for PHY auto negotiation to complete..." message */ - -/* - * I2C driver - */ - -#define CONFIG_SYS_I2C_LPC32XX -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_SPEED 350000 - -/* - * I2C EEPROM - */ - -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x56 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 - -/* - * I2C RTC - */ - -#define CONFIG_RTC_DS1374 - -/* - * U-Boot General Configurations - */ -#define CONFIG_SYS_CBSIZE 1024 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -/* - * NAND chip timings for FIXME: which one? - */ - -#define CONFIG_LPC32XX_NAND_MLC_TCEA_DELAY 333333333 -#define CONFIG_LPC32XX_NAND_MLC_BUSY_DELAY 10000000 -#define CONFIG_LPC32XX_NAND_MLC_NAND_TA 18181818 -#define CONFIG_LPC32XX_NAND_MLC_RD_HIGH 31250000 -#define CONFIG_LPC32XX_NAND_MLC_RD_LOW 45454545 -#define CONFIG_LPC32XX_NAND_MLC_WR_HIGH 40000000 -#define CONFIG_LPC32XX_NAND_MLC_WR_LOW 83333333 - -/* - * NAND - */ - -/* driver configuration */ -#define CONFIG_SYS_NAND_SELF_INIT -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_MAX_NAND_CHIPS 1 -#define CONFIG_SYS_NAND_BASE MLC_NAND_BASE -#define CONFIG_NAND_LPC32XX_MLC - -/* - * GPIO - */ - -#define CONFIG_LPC32XX_GPIO - -/* - * SSP/SPI/DISPLAY - */ - -#define CONFIG_LPC32XX_SSP_TIMEOUT 100000 -/* - * Environment - */ - -#define CONFIG_ENV_SIZE 0x00020000 -#define CONFIG_ENV_OFFSET 0x00100000 -#define CONFIG_ENV_OFFSET_REDUND 0x00120000 -#define CONFIG_ENV_ADDR 0x80000100 - -/* - * Boot Linux - */ -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG - -#define CONFIG_BOOTFILE "uImage" -#define CONFIG_LOADADDR 0x80008000 - -/* - * SPL - */ - -/* SPL will be executed at offset 0 */ -/* SPL will use SRAM as stack */ -#define CONFIG_SPL_STACK 0x0000FFF8 -/* Use the framework and generic lib */ -/* SPL will use serial */ -/* SPL will load U-Boot from NAND offset 0x40000 */ -#define CONFIG_SPL_NAND_DRIVERS -#define CONFIG_SPL_NAND_BASE -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x00040000 -#define CONFIG_SPL_PAD_TO 0x20000 -/* U-Boot will be 0x40000 bytes, loaded and run at CONFIG_SYS_TEXT_BASE */ -#define CONFIG_SYS_MONITOR_LEN 0x40000 /* actually, MAX size */ -#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE - -/* - * Include SoC specific configuration - */ -#include <asm/arch/config.h> - -#endif /* __CONFIG_WORK_92105_H__*/ |