diff options
Diffstat (limited to 'include/configs/xilinx_versal.h')
| -rw-r--r-- | include/configs/xilinx_versal.h | 154 |
1 files changed, 0 insertions, 154 deletions
diff --git a/include/configs/xilinx_versal.h b/include/configs/xilinx_versal.h deleted file mode 100644 index f426127..0000000 --- a/include/configs/xilinx_versal.h +++ /dev/null @@ -1,154 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Configuration for Xilinx Versal - * (C) Copyright 2016 - 2018 Xilinx, Inc. - * Michal Simek <michal.simek@xilinx.com> - * - * Based on Configuration for Xilinx ZynqMP - */ - -#ifndef __XILINX_VERSAL_H -#define __XILINX_VERSAL_H - -#define CONFIG_REMAKE_ELF - -/* #define CONFIG_ARMV8_SWITCH_TO_EL1 */ - -/* Generic Interrupt Controller Definitions */ -#define GICD_BASE 0xF9000000 -#define GICR_BASE 0xF9080000 - -#define CONFIG_SYS_MEMTEST_SCRATCH 0xfffc0000 - -#define CONFIG_SYS_MEMTEST_START 0 -#define CONFIG_SYS_MEMTEST_END 1000 - -#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE - -/* Generic Timer Definitions - setup in EL3. Setup by ATF for other cases */ -#if CONFIG_COUNTER_FREQUENCY -# define COUNTER_FREQUENCY CONFIG_COUNTER_FREQUENCY -#endif - -/* Serial setup */ -#define CONFIG_ARM_DCC -#define CONFIG_CPU_ARMV8 - -#define CONFIG_SYS_BAUDRATE_TABLE \ - { 4800, 9600, 19200, 38400, 57600, 115200 } - -/* BOOTP options */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_MAY_FAIL - -/* Miscellaneous configurable options */ -#define CONFIG_SYS_LOAD_ADDR 0x8000000 - -/* Monitor Command Prompt */ -/* Console I/O Buffer Size */ -#define CONFIG_SYS_CBSIZE 2048 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_MAXARGS 64 - -#if defined(CONFIG_CMD_DFU) -#define CONFIG_SYS_DFU_DATA_BUF_SIZE 0x1800000 -#define DFU_DEFAULT_POLL_TIMEOUT 300 -#define CONFIG_THOR_RESET_OFF -#define DFU_ALT_INFO_RAM \ - "dfu_ram_info=" \ - "setenv dfu_alt_info " \ - "Image ram $kernel_addr_r $kernel_size_r\\\\;" \ - "system.dtb ram $fdt_addr_r $fdt_size_r\0" \ - "dfu_ram=run dfu_ram_info && dfu 0 ram 0\0" \ - "thor_ram=run dfu_ram_info && thordown 0 ram 0\0" - -#define DFU_ALT_INFO \ - DFU_ALT_INFO_RAM -#endif - -#if !defined(DFU_ALT_INFO) -# define DFU_ALT_INFO -#endif - -/* Ethernet driver */ -#if defined(CONFIG_ZYNQ_GEM) -# define CONFIG_NET_MULTI -# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN -# define PHY_ANEG_TIMEOUT 20000 -#endif - -#define CONFIG_SYS_BOOTM_LEN (60 * 1024 * 1024) - -#define CONFIG_CLOCKS - -#define ENV_MEM_LAYOUT_SETTINGS \ - "fdt_high=10000000\0" \ - "fdt_addr_r=0x40000000\0" \ - "fdt_size_r=0x400000\0" \ - "pxefile_addr_r=0x10000000\0" \ - "kernel_addr_r=0x18000000\0" \ - "kernel_size_r=0x10000000\0" \ - "scriptaddr=0x20000000\0" \ - "ramdisk_addr_r=0x02100000\0" \ - "script_offset_f=0x7F80000\0" \ - "script_size_f=0x80000\0" - -#if defined(CONFIG_MMC_SDHCI_ZYNQ) -# define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0) func(MMC, mmc, 1) -#else -# define BOOT_TARGET_DEVICES_MMC(func) -#endif - -#if defined(CONFIG_ZYNQMP_GQSPI) || defined(CONFIG_CADENCE_OSPI_VERSAL) -# define BOOT_TARGET_DEVICES_XSPI(func) func(XSPI, xspi, 0) -#else -# define BOOT_TARGET_DEVICES_XSPI(func) -#endif - -#define BOOTENV_DEV_XSPI(devtypeu, devtypel, instance) \ - "bootcmd_xspi0=sf probe 0 0 0 && " \ - "sf read $scriptaddr $script_offset_f $script_size_f && " \ - "source ${scriptaddr}; echo SCRIPT FAILED: continuing...;\0" - -#define BOOTENV_DEV_NAME_XSPI(devtypeu, devtypel, instance) \ - "xspi " - -#define BOOT_TARGET_DEVICES_JTAG(func) func(JTAG, jtag, na) - -#define BOOTENV_DEV_JTAG(devtypeu, devtypel, instance) \ - "bootcmd_jtag=source $scriptaddr; echo SCRIPT FAILED: continuing...;\0" - -#define BOOTENV_DEV_NAME_JTAG(devtypeu, devtypel, instance) \ - "jtag " - -#define BOOT_TARGET_DEVICES_DFU_USB(func) func(DFU_USB, dfu_usb, 0) - -#define BOOTENV_DEV_DFU_USB(devtypeu, devtypel, instance) \ - "bootcmd_dfu_usb=setenv dfu_alt_info boot.scr ram $scriptaddr " \ - "$script_size_f; dfu 0 ram 0 && source $scriptaddr; " \ - "echo SCRIPT FAILED: continuing...;\0" - -#define BOOTENV_DEV_NAME_DFU_USB(devtypeu, devtypel, instance) \ - "dfu_usb " - -#define BOOT_TARGET_DEVICES(func) \ - BOOT_TARGET_DEVICES_JTAG(func) \ - BOOT_TARGET_DEVICES_MMC(func) \ - BOOT_TARGET_DEVICES_XSPI(func) \ - BOOT_TARGET_DEVICES_DFU_USB(func) \ - func(PXE, pxe, na) \ - func(DHCP, dhcp, na) - -#include <config_distro_bootcmd.h> - -/* Initial environment variables */ -#ifndef CONFIG_EXTRA_ENV_SETTINGS -#define CONFIG_EXTRA_ENV_SETTINGS \ - ENV_MEM_LAYOUT_SETTINGS \ - BOOTENV \ - DFU_ALT_INFO -#endif - -#endif /* __XILINX_VERSAL_H */ |