diff options
Diffstat (limited to 'include/configs/xpress.h')
| -rw-r--r-- | include/configs/xpress.h | 134 |
1 files changed, 0 insertions, 134 deletions
diff --git a/include/configs/xpress.h b/include/configs/xpress.h deleted file mode 100644 index 4cbf8aa..0000000 --- a/include/configs/xpress.h +++ /dev/null @@ -1,134 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2015-2016 Stefan Roese <sr@denx.de> - * - * Configuration settings for the CCV xPress board - */ -#ifndef __XPRESS_CONFIG_H -#define __XPRESS_CONFIG_H - -#include "mx6_common.h" -#include <asm/mach-imx/gpio.h> - -/* SPL options */ -#include "imx6_spl.h" - -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (16 << 20) - -#define CONFIG_MXC_UART -#define CONFIG_MXC_UART_BASE MX6UL_UART7_BASE_ADDR - -/* MMC Configs */ -#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR - -/* I2C configs */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_MXC -#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ -#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ -#define CONFIG_SYS_I2C_MXC_I2C4 /* enable I2C bus 4 */ -#define CONFIG_SYS_I2C_SPEED 100000 - -/* Miscellaneous configurable options */ -#define CONFIG_SYS_MEMTEST_START 0x80000000 -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x10000000) - -#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000 - -/* Physical Memory Map */ -#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR -#define PHYS_SDRAM_SIZE (128 << 20) - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE - -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - -/* Environment is in stored in the eMMC boot partition */ -#define CONFIG_ENV_SIZE (16 << 10) -#define CONFIG_ENV_OFFSET (512 << 10) -#define CONFIG_SYS_MMC_ENV_DEV 0 /* USDHC2 */ -#define CONFIG_SYS_MMC_ENV_PART 1 /* boot parition */ -#define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USDHC2 */ - -/* USB Configs */ -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 -#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 - -#define CONFIG_FEC_MXC -#define CONFIG_FEC_ENET_DEV 0 -#define IMX_FEC_BASE ENET_BASE_ADDR -#define CONFIG_FEC_MXC_PHYADDR 0x0 -#define CONFIG_FEC_XCV_TYPE RMII -#define CONFIG_ETHPRIME "FEC" -#define CONFIG_PHY_SMSC - -#define CONFIG_IMX_THERMAL - -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - -#define CONFIG_UBOOT_SECTOR_START 0x2 -#define CONFIG_UBOOT_SECTOR_COUNT 0x3fe - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "script=boot.scr\0" \ - "image=zImage\0" \ - "console=ttymxc6\0" \ - "fdt_high=0xffffffff\0" \ - "initrd_high=0xffffffff\0" \ - "fdt_file=undefined\0" \ - "fdt_addr=0x83000000\0" \ - "boot_fdt=try\0" \ - "ip_dyn=yes\0" \ - "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ - "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ - "mmcautodetect=yes\0" \ - "mmcargs=setenv bootargs console=${console},${baudrate} " \ - "root=${mmcroot}\0" \ - "loadbootscript=" \ - "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ - "bootscript=echo Running bootscript from mmc ...; " \ - "source\0" \ - "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ - "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ - "mmcboot=echo Booting from mmc ...; " \ - "run mmcargs; " \ - "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ - "if run loadfdt; then " \ - "bootz ${loadaddr} - ${fdt_addr}; " \ - "else " \ - "if test ${boot_fdt} = try; then " \ - "bootz; " \ - "else " \ - "echo WARN: Cannot load the DT; " \ - "fi; " \ - "fi; " \ - "else " \ - "bootz; " \ - "fi;\0" \ - "uboot=ccv/u-boot.imx\0" \ - "uboot_start="__stringify(CONFIG_UBOOT_SECTOR_START)"\0" \ - "uboot_size="__stringify(CONFIG_UBOOT_SECTOR_COUNT)"\0" \ - "update_uboot=if tftp ${uboot}; then " \ - "if itest ${filesize} > 0; then " \ - "mmc dev 0 1;" \ - "setexpr blkc ${filesize} / 0x200;" \ - "setexpr blkc ${blkc} + 1;" \ - "if itest ${blkc} <= ${uboot_size}; then " \ - "mmc write ${loadaddr} ${uboot_start} " \ - "${blkc};" \ - "fi;" \ - "fi; fi;" \ - "setenv filesize; setenv blkc\0" \ - "update_bootpart=mmc bootbus 0 2 1 2;mmc partconf 0 1 1 0\0" - -#endif /* __XPRESS_CONFIG_H */ |