PCH GPIO Porting

"F81866_FLOPPY_PORT_PRESENT" = 0
"F81866_PARALLEL_PORT_PRESENT" = 0

3 files changed, 635 insertions, 3 deletions

diff --git a/CRB/CSP.sdl b/CRB/CSP.sdl
index c43782f..bcbe442 100644
--- a/CRB/CSP.sdl
+++ b/CRB/CSP.sdl
@@ -661,3 +661,628 @@ TOKEN
 	TokenType = Boolean
 	TargetH = Yes
 End
+## Program PCH GPIO
+TOKEN
+	Name = "PROGRAM_GPIO_TYPE"
+	Value = "1"
+	Help = "0:use array directly/1:use token define"
+	TokenType = Boolean
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_000"
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_001"
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_002"
+	Value = "$(IS_NOT_GPIO)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_003"
+	Value = "$(IS_NOT_GPIO)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_004"
+	Value = "$(IS_NOT_GPIO)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_005"
+	Value = "$(IS_NOT_GPIO)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_006"
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_007"
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_008"
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_009"
+	Value = "$(IS_NOT_GPIO)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_010"
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_011"
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_012"
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_013"
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_014"
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_015"
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_016"
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_017"
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_018"
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_019"
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_020"
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_021"
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_022" ## LAN1_DISABLE#
+	Value = "$(GPO_HIGH)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_023"
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_024"
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_025"
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_026"
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_027"
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_028"
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_029"
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_030"
+	Value = "$(IS_NOT_GPIO)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_031"
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_032"
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_033"
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_034"
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_035"
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_036"
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_037"
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_038" ## LAN2_DISABLE#
+	Value = "$(GPO_HIGH)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_039" ## BOARD_ID
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_040"
+	Value = "$(IS_NOT_GPIO)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_041"
+	Value = "$(IS_NOT_GPIO)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_042"
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_043"
+	Value = "$(IS_NOT_GPIO)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_044"
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_045"
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_046"
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_048" ## BOARD_ID
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_049"
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_050" ## Connected to TPM Header
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_051"
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_052"
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_053"
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_054"
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_055"
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_057"
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_058" ## SML1CLK
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_059"
+	Value = "$(IS_NOT_GPIO)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_060"
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_061"
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_062"
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_063"
+	Value = "$(IS_NOT_GPIO)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_064"
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_065"
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_066"
+	Value = "$(IS_NOT_GPIO)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_067"
+	Value = "$(IS_NOT_GPIO)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_068"
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_069"
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_070"
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_071"
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_072"
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_073"
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_074"
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name = "GPIO_075"
+	Value = "$(IS_GPIO)+$(IS_GPI)"
+	Help = "[0]:GPIO USE Select - 0:Native Mode/1:GPIO Mode.;\[1]:GPIO Input/Output Select.\[2]:GPIO Level Select.\[3]:GPIO Signal Invert(Only For GPIO_00~31).\[4]:GPIO Blink Enable(Only For GPIO_00~31).\[5]:GPIO Reset Select.\[15:6]:RESERVED"
+	TokenType = Integer
+	TargetEQU = Yes
+	TargetH = Yes
+End
+
+## Board\IO\F81866\IO_F81866.SDL
+TOKEN
+	Name  = "BOARD_LABEL_BELOW_25"
+	Value  = "0"
+	Help  = "Enable(Core<=4.6.4.0)/Disable(Core > 4.6.4.0 have defined AMI_CALLBACK_VARSTORE)"
+	TokenType = Boolean
+	TargetMAK = Yes
+	TargetH = Yes
+End
+TOKEN
+	Name  = "F81866_FLOPPY_PORT_PRESENT"
+	Value  = "0"
+	Help  = "Floppy Port Present / Not Present."
+	TokenType = Boolean
+	TargetH = Yes
+End
+TOKEN
+	Name  = "F81866_PARALLEL_PORT_PRESENT"
+	Value  = "0"
+	Help  = "LPT Port Present / Not Present."
+	TokenType = Boolean
+	TargetH = Yes
+End
diff --git a/RomImage/XmlFiles/Q87_8Mx2.xml b/RomImage/XmlFiles/Q87_8Mx2.xml
index 1340e4b..8595e3f 100644
--- a/RomImage/XmlFiles/Q87_8Mx2.xml
+++ b/RomImage/XmlFiles/Q87_8Mx2.xml
@@ -71,8 +71,8 @@
 					<MacSecDisable value="true" edit="false" visible="true" name="MACsec Disable" help_text="MACsec is a hop-by-hop network security solution. It provides Layer 2 encryption and authenticity/integrity protection for packets traveling between MACsec-enabled nodes of the network."/>
 					<LanPhyPcGp12Sel value="GPIO12 default is General Purpose (GP) output" value_list="GPIO12 default is General Purpose (GP) output,,GPIO12 is used in native mode as LANPHYPC" edit="false" visible="true" name="LAN PHY Power Control GPIO12 Select" help_text="Lan Phy Power"/>
 					<SmBusEnable value="true" edit="true" visible="true" name="Intel (R) ME SMBus Enable" help_text="Configures if Intel (R) ME SMBus is enabled."/>
-					<SmLink0Enable value="true" edit="true" visible="true" name="SMLink0 Enable" help_text="Configures if SmLink0 is enabled."/>
-					<SmLink1Enable value="true" edit="true" visible="true" name="SMLink1 Enable" help_text="Configures if SmLink1 is enabled."/>
+					<SmLink0Enable value="false" edit="true" visible="true" name="SMLink0 Enable" help_text="Configures if SmLink0 is enabled."/>
+					<SmLink1Enable value="false" edit="true" visible="true" name="SMLink1 Enable" help_text="Configures if SmLink1 is enabled."/>
 				</PchStrap0>
 				<PchStrap1 name="PCH Strap 1">
 					<TpmClockFrequency value="33MHz" value_list="20MHz,,33MHz" edit="true" visible="true" name="TPM Clock Frequency" help_text="This field identifies the frequency that should be used with the TPM on SPI (50MHz supported only on C610). This field is undefined if the TPM on SPI is disabled by softstrap."/>
diff --git a/actionitems.txt b/actionitems.txt
index e617cc9..110dce5 100644
--- a/actionitems.txt
+++ b/actionitems.txt
@@ -1,10 +1,17 @@
 2018/06/15
 	Review decode algorithm
 	Clock Gen - 2018/06/15 no need
-	GPIO Multifunction
+	GPIO Multifunction - 2018/06/15 done
 	VBIOS - 2018/06/15 done
 	Disable Gbe Controller - 2018/06/15 done
 	CH7511 Porting
+	Discussion : LAN_DIS PULL H/L
+	Discussion : GPIO32 only GPIO mode
+	Review tables in schematics
+	SML1/2 CLK / DATA should not be connected to SIO
+	SIO GPIO Porting
+	SIO Function Porting
+	SIO PECI / Smart FAN
 2018/06/14
 	"iAMT_SUPPORT" = 0 - 2018/06/15 done
 	IntelPTT_SUPPORT = 0 - 2018/06/15 done