diff options
author | raywu <raywu0301@gmail.com> | 2018-06-15 00:00:50 +0800 |
---|---|---|
committer | raywu <raywu0301@gmail.com> | 2018-06-15 00:00:50 +0800 |
commit | b7c51c9cf4864df6aabb99a1ae843becd577237c (patch) | |
tree | eebe9b0d0ca03062955223097e57da84dd618b9a /ReferenceCode/Chipset/LynxPoint/SampleCode/PchPolicyInit/Pei | |
download | zprj-b7c51c9cf4864df6aabb99a1ae843becd577237c.tar.xz |
Diffstat (limited to 'ReferenceCode/Chipset/LynxPoint/SampleCode/PchPolicyInit/Pei')
4 files changed, 437 insertions, 0 deletions
diff --git a/ReferenceCode/Chipset/LynxPoint/SampleCode/PchPolicyInit/Pei/PchPolicyInitPei.c b/ReferenceCode/Chipset/LynxPoint/SampleCode/PchPolicyInit/Pei/PchPolicyInitPei.c new file mode 100644 index 0000000..08e0cf7 --- /dev/null +++ b/ReferenceCode/Chipset/LynxPoint/SampleCode/PchPolicyInit/Pei/PchPolicyInitPei.c @@ -0,0 +1,250 @@ +/** @file + This file is SampleCode for Intel PCH PEI Platform Policy initialzation. + +@copyright + Copyright (c) 2009 - 2013 Intel Corporation. All rights reserved + This software and associated documentation (if any) is furnished + under a license and may only be used or copied in accordance + with the terms of the license. Except as permitted by such + license, no part of this software or documentation may be + reproduced, stored in a retrieval system, or transmitted in any + form or by any means without the express written consent of + Intel Corporation. + + This file contains a 'Sample Driver' and is licensed as such + under the terms of your license agreement with Intel or your + vendor. This file may be modified by the user, subject to + the additional terms of the license agreement + +**/ +#include "PchPolicyInitPei.h" +#include "..\Common\PchPolicyInitCommon.h" +#ifdef RAPID_START_FLAG +#include "RapidStartCommonLib.h" +#endif + +/** + This PEIM performs PCH PEI Platform Policy initialzation. + + @param[in] FfsHeader Pointer to Firmware File System file header. + @param[in] PeiServices General purpose services available to every PEIM. + + @retval EFI_SUCCESS The PPI is installed and initialized. + @retval EFI ERRORS The PPI is not successfully installed. + @retval EFI_OUT_OF_RESOURCES Do not have enough resources to initialize the driver +**/ +EFI_STATUS +EFIAPI +PchPolicyInitPeiEntryPoint ( + IN EFI_FFS_FILE_HEADER *FfsHeader, + IN EFI_PEI_SERVICES **PeiServices + ) +{ + EFI_STATUS Status; + EFI_PEI_PPI_DESCRIPTOR *PchPlatformPolicyPpiDesc; + PCH_PLATFORM_POLICY_PPI *PchPlatformPolicyPpi; + PCH_GBE_CONFIG *GbeConfig; + PCH_THERMAL_MANAGEMENT *ThermalMgmt; + PCH_MEMORY_THROTTLING *MemoryThrottling; + PCH_HPET_CONFIG *HpetConfig; + PCH_SATA_CONTROL *SataConfig; + PCH_SATA_TRACE_CONFIG *SataTraceConfig; + PCH_PCIE_CONFIG *PcieConfig; + PCH_IOAPIC_CONFIG *IoApicConfig; + PCH_PLATFORM_DATA *PlatformData; + PCH_USB_CONFIG *UsbConfig; +#ifdef USB_PRECONDITION_ENABLE_FLAG + EFI_BOOT_MODE BootMode; +#endif // USB_PRECONDITION_ENABLE_FLAG + UINT8 PortIndex; + + PchPlatformPolicyPpiDesc = (EFI_PEI_PPI_DESCRIPTOR *) AllocateZeroPool (sizeof (EFI_PEI_PPI_DESCRIPTOR)); + ASSERT (PchPlatformPolicyPpiDesc != NULL); + if (PchPlatformPolicyPpiDesc == NULL) { + return EFI_OUT_OF_RESOURCES; + } + + PchPlatformPolicyPpi = (PCH_PLATFORM_POLICY_PPI *) AllocateZeroPool (sizeof (PCH_PLATFORM_POLICY_PPI)); + ASSERT (PchPlatformPolicyPpi != NULL); + if (PchPlatformPolicyPpi == NULL) { + return EFI_OUT_OF_RESOURCES; + } + + GbeConfig = (PCH_GBE_CONFIG *) AllocateZeroPool (sizeof (PCH_GBE_CONFIG)); + ASSERT (GbeConfig != NULL); + if (GbeConfig == NULL) { + return EFI_OUT_OF_RESOURCES; + } + + ThermalMgmt = (PCH_THERMAL_MANAGEMENT *) AllocateZeroPool (sizeof (PCH_THERMAL_MANAGEMENT)); + ASSERT (ThermalMgmt != NULL); + if (ThermalMgmt == NULL) { + return EFI_OUT_OF_RESOURCES; + } + + MemoryThrottling = (PCH_MEMORY_THROTTLING *) AllocateZeroPool (sizeof (PCH_MEMORY_THROTTLING)); + ASSERT (MemoryThrottling != NULL); + if (MemoryThrottling == NULL) { + return EFI_OUT_OF_RESOURCES; + } + + HpetConfig = (PCH_HPET_CONFIG *) AllocateZeroPool (sizeof (PCH_HPET_CONFIG)); + ASSERT (HpetConfig != NULL); + if (HpetConfig == NULL) { + return EFI_OUT_OF_RESOURCES; + } + + SataConfig = (PCH_SATA_CONTROL *) AllocateZeroPool (sizeof (PCH_SATA_CONTROL)); + ASSERT (SataConfig != NULL); + if (SataConfig == NULL) { + return EFI_OUT_OF_RESOURCES; + } + + SataTraceConfig = (PCH_SATA_TRACE_CONFIG *) AllocateZeroPool (sizeof (PCH_SATA_TRACE_CONFIG)); + ASSERT (SataTraceConfig != NULL); + if (SataTraceConfig == NULL) { + return EFI_OUT_OF_RESOURCES; + } + + PcieConfig = (PCH_PCIE_CONFIG *) AllocateZeroPool (sizeof (PCH_PCIE_CONFIG)); + ASSERT (PcieConfig != NULL); + if (PcieConfig == NULL) { + return EFI_OUT_OF_RESOURCES; + } + + IoApicConfig = (PCH_IOAPIC_CONFIG *) AllocateZeroPool (sizeof (PCH_IOAPIC_CONFIG)); + ASSERT (IoApicConfig != NULL); + if (IoApicConfig == NULL) { + return EFI_OUT_OF_RESOURCES; + } + + PlatformData = (PCH_PLATFORM_DATA *) AllocateZeroPool (sizeof (PCH_PLATFORM_DATA)); + ASSERT (PlatformData != NULL); + if (PlatformData == NULL) { + return EFI_OUT_OF_RESOURCES; + } + + UsbConfig = (PCH_USB_CONFIG *) AllocateZeroPool (sizeof (PCH_USB_CONFIG)); + ASSERT (UsbConfig != NULL); + if (UsbConfig == NULL) { + return EFI_OUT_OF_RESOURCES; + } + PchPlatformPolicyPpi->Revision = PCH_PLATFORM_POLICY_PPI_REVISION_4; + PchPlatformPolicyPpi->BusNumber = 0; + PchPlatformPolicyPpi->Rcba = PCH_LPC_RCBA_BASE_ADDRESS; + PchPlatformPolicyPpi->PmBase = PCH_LPC_ACPI_BASE_ADDRESS; + PchPlatformPolicyPpi->GpioBase = PCH_LPC_GPIO_BASE_ADDRESS; + PchPlatformPolicyPpi->Port80Route = 0; + + PchPlatformPolicyPpi->GbeConfig = GbeConfig; + PchPlatformPolicyPpi->ThermalMgmt = ThermalMgmt; + PchPlatformPolicyPpi->HpetConfig = HpetConfig; + PchPlatformPolicyPpi->SataConfig = SataConfig; + PchPlatformPolicyPpi->PcieConfig = PcieConfig; + PchPlatformPolicyPpi->IoApicConfig = IoApicConfig; + PchPlatformPolicyPpi->PlatformData = PlatformData; + PchPlatformPolicyPpi->UsbConfig = UsbConfig; + + GbeConfig->EnableGbe = 1; + ThermalMgmt->MemoryThrottling = MemoryThrottling; + MemoryThrottling->Enable = PCH_DEVICE_DISABLE; + MemoryThrottling->TsGpioPinSetting[TsGpioC].PmsyncEnable = PCH_DEVICE_ENABLE; + MemoryThrottling->TsGpioPinSetting[TsGpioD].PmsyncEnable = PCH_DEVICE_ENABLE; + MemoryThrottling->TsGpioPinSetting[TsGpioC].C0TransmitEnable = PCH_DEVICE_ENABLE; + MemoryThrottling->TsGpioPinSetting[TsGpioD].C0TransmitEnable = PCH_DEVICE_ENABLE; + MemoryThrottling->TsGpioPinSetting[TsGpioC].PinSelection = 1; + MemoryThrottling->TsGpioPinSetting[TsGpioD].PinSelection = 0; + + HpetConfig->Enable = 1; + HpetConfig->Base = PCH_HPET_BASE_ADDRESS; + + SataConfig->SataMode = PchSataModeAhci; + SataConfig->SataTraceConfig = SataTraceConfig; + + SataTraceConfig->TestMode = PCH_DEVICE_DISABLE; + for( PortIndex = 0; PortIndex < 6; PortIndex++ ) { + SataTraceConfig->PortRxEq[PortIndex].GenSpeed[0].Enable = PCH_DEVICE_DISABLE; + SataTraceConfig->PortRxEq[PortIndex].GenSpeed[1].Enable = PCH_DEVICE_DISABLE; + SataTraceConfig->PortRxEq[PortIndex].GenSpeed[2].Enable = PCH_DEVICE_DISABLE; + SataTraceConfig->PortRxEq[PortIndex].GenSpeed[0].RxEq = 0x0; + SataTraceConfig->PortRxEq[PortIndex].GenSpeed[1].RxEq = 0x0; + SataTraceConfig->PortRxEq[PortIndex].GenSpeed[2].RxEq = 0x0; + } + + PcieConfig->PcieSpeed[0] = PchPcieAuto; + PcieConfig->PcieSpeed[1] = PchPcieAuto; + PcieConfig->PcieSpeed[2] = PchPcieAuto; + PcieConfig->PcieSpeed[3] = PchPcieAuto; + PcieConfig->PcieSpeed[4] = PchPcieAuto; + PcieConfig->PcieSpeed[5] = PchPcieAuto; + PcieConfig->PcieSpeed[6] = PchPcieAuto; + PcieConfig->PcieSpeed[7] = PchPcieAuto; + + IoApicConfig->IoApicId = 0x02; + IoApicConfig->ApicRangeSelect = 0x00; + IoApicConfig->IoApicEntry24_39 = PCH_DEVICE_ENABLE; + + PlatformData->EcPresent = 0; + /// + /// PlatformData->SmmBwp value directly depends on the value of CpuConfig->Pfat + /// (found in CpuPolicyInitPei.c file) + /// If CpuConfig->Pfat is set to 1 (enabled) then + /// PlatformData->SmmBwp has to be set to 1 (enabled) + /// This is a PFAT Security requirement that needs to be addressed + /// If CpuConfig->Pfat is set to 0 (disabled) then + /// PlatformData->SmmBwp value don't care, it can be set to either + /// 1 (enabled) or 0 (disabled) based on customer implementation + /// + PlatformData->SmmBwp = 0; + + /// + /// Temporary Memory Base Address for PCI devices to be used to initialize MMIO registers. + /// Minimum size is 64KB bytes. + /// + PlatformData->TempMemBaseAddr = PCH_TEMP_MEM_BASE_ADDRESS; + + /// + /// Init USB related setting + /// + InitPchUsbConfig (UsbConfig); + + PchPlatformPolicyPpiDesc->Flags = EFI_PEI_PPI_DESCRIPTOR_PPI | EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST; + PchPlatformPolicyPpiDesc->Guid = &gPchPlatformPolicyPpiGuid; + + UpdatePeiPchPlatformPolicy (PeiServices, PchPlatformPolicyPpi); +#ifdef RAPID_START_FLAG + if (RapidStartResumeCheck () == TRUE) { + /// + /// This is RapidStart resume, skip the UsbPrecondition feature in PEI phase + /// + PchPlatformPolicyPpi->UsbConfig->UsbPrecondition = 0; + } +#endif + + + PchPlatformPolicyPpiDesc->Ppi = PchPlatformPolicyPpi; +#ifdef USB_PRECONDITION_ENABLE_FLAG + /// + /// Update Precondition option for S4 resume. + /// Skip Precondition for S4 resume in case this boot may not connect BIOS USB driver. + /// If BIOS USB driver will be connected always for S4, then disable below update. + /// To keep consistency during boot, must enabled or disabled below function in both PEI and DXE + /// PlatformPolicyInit driver. + /// + if (UsbConfig->UsbPrecondition == TRUE) { + (*PeiServices)->GetBootMode (PeiServices, &BootMode); + if (BootMode == BOOT_ON_S4_RESUME) { + UsbConfig->UsbPrecondition = FALSE; + DEBUG ((EFI_D_INFO, "BootMode is BOOT_ON_S4_RESUME, disable Precondition\n")); + } + } +#endif // USB_PRECONDITION_ENABLE_FLAG + + /// + /// Install PCH Platform Policy PPI + /// + Status = (**PeiServices).InstallPpi (PeiServices, PchPlatformPolicyPpiDesc); + ASSERT_EFI_ERROR (Status); + + return Status; +} diff --git a/ReferenceCode/Chipset/LynxPoint/SampleCode/PchPolicyInit/Pei/PchPolicyInitPei.dxs b/ReferenceCode/Chipset/LynxPoint/SampleCode/PchPolicyInit/Pei/PchPolicyInitPei.dxs new file mode 100644 index 0000000..806a8d6 --- /dev/null +++ b/ReferenceCode/Chipset/LynxPoint/SampleCode/PchPolicyInit/Pei/PchPolicyInitPei.dxs @@ -0,0 +1,40 @@ +/** @file + Dependency expression source file. + +@copyright + Copyright (c) 2010 - 2012 Intel Corporation. All rights reserved + This software and associated documentation (if any) is furnished + under a license and may only be used or copied in accordance + with the terms of the license. Except as permitted by such + license, no part of this software or documentation may be + reproduced, stored in a retrieval system, or transmitted in any + form or by any means without the express written consent of + Intel Corporation. + + This file contains a 'Sample Driver' and is licensed as such + under the terms of your license agreement with Intel or your + vendor. This file may be modified by the user, subject to + the additional terms of the license agreement + +**/ + + +// +// Common for R8 and R9 codebase +// +#include "AutoGen.h" +#include "PeimDepex.h" + +// +// BUILD_WITH_GLUELIB and BUILD_WITH_EDKII_GLUE_LIB are both "defined" in R8 codebase; +// BUILD_WITH_EDKII_GLUE_LIB is defined in Edk-Dev-Snapshot-20070228 and later version +// BUILD_WITH_GLUELIB and BUILD_WITH_EDKII_GLUE_LIB are "not defined" in R9 codebase. +// +#if defined (BUILD_WITH_GLUELIB) || defined (BUILD_WITH_EDKII_GLUE_LIB) +#include "EfiDepex.h" +#include EFI_PPI_DEPENDENCY (Variable) +#endif + +DEPENDENCY_START + PEI_READ_ONLY_VARIABLE_ACCESS_PPI_GUID +DEPENDENCY_END diff --git a/ReferenceCode/Chipset/LynxPoint/SampleCode/PchPolicyInit/Pei/PchPolicyInitPei.h b/ReferenceCode/Chipset/LynxPoint/SampleCode/PchPolicyInit/Pei/PchPolicyInitPei.h new file mode 100644 index 0000000..3d155b3 --- /dev/null +++ b/ReferenceCode/Chipset/LynxPoint/SampleCode/PchPolicyInit/Pei/PchPolicyInitPei.h @@ -0,0 +1,60 @@ +/** @file + Header file for the PchPeiPolicy PEIM. + +@copyright + Copyright (c) 2009 - 2012 Intel Corporation. All rights reserved + This software and associated documentation (if any) is furnished + under a license and may only be used or copied in accordance + with the terms of the license. Except as permitted by such + license, no part of this software or documentation may be + reproduced, stored in a retrieval system, or transmitted in any + form or by any means without the express written consent of + Intel Corporation. + + This file contains a 'Sample Driver' and is licensed as such + under the terms of your license agreement with Intel or your + vendor. This file may be modified by the user, subject to + the additional terms of the license agreement +**/ +#ifndef _PCH_POLICY_INIT_PEI_H_ +#define _PCH_POLICY_INIT_PEI_H_ + +// +// External include files do NOT need to be explicitly specified in real EDKII +// environment +// +#if !defined(EDK_RELEASE_VERSION) || (EDK_RELEASE_VERSION < 0x00020000) +#include "EdkIIGluePeim.h" +#include EFI_PPI_PRODUCER (PchPlatformPolicy) +#include "PchAccess.h" +#include "PchPlatformPolicyUpdatePeiLib.h" +#endif + +#define PCH_LPC_RCBA_BASE_ADDRESS 0xFED1C000 +#define PCH_LPC_ACPI_BASE_ADDRESS 0x1800 +#define PCH_LPC_GPIO_BASE_ADDRESS 0x800 + +#define PCH_TEMP_MEM_BASE_ADDRESS 0xDFFF0000 +#define PCH_HPET_BASE_ADDRESS 0xFED00000 + +// +// Functions +// + +/** + This PEIM performs PCH PEI Platform Policy initialzation. + + @param[in] FfsHeader Pointer to Firmware File System file header. + @param[in] PeiServices General purpose services available to every PEIM. + + @retval EFI_SUCCESS The PPI is installed and initialized. + @retval EFI ERRORS The PPI is not successfully installed. + @retval EFI_OUT_OF_RESOURCES Do not have enough resources to initialize the driver +**/ +EFI_STATUS +EFIAPI +PchPolicyInitPeiEntryPoint ( + IN EFI_FFS_FILE_HEADER *FfsHeader, + IN EFI_PEI_SERVICES **PeiServices + ); +#endif diff --git a/ReferenceCode/Chipset/LynxPoint/SampleCode/PchPolicyInit/Pei/PchPolicyInitPei.inf b/ReferenceCode/Chipset/LynxPoint/SampleCode/PchPolicyInit/Pei/PchPolicyInitPei.inf new file mode 100644 index 0000000..37ab29d --- /dev/null +++ b/ReferenceCode/Chipset/LynxPoint/SampleCode/PchPolicyInit/Pei/PchPolicyInitPei.inf @@ -0,0 +1,87 @@ +## @file +# Component description file for the PchPolicyInitPei PEIM. +# +#@copyright +# Copyright (c) 2009 - 2012 Intel Corporation. All rights reserved +# This software and associated documentation (if any) is furnished +# under a license and may only be used or copied in accordance +# with the terms of the license. Except as permitted by such +# license, no part of this software or documentation may be +# reproduced, stored in a retrieval system, or transmitted in any +# form or by any means without the express written consent of +# Intel Corporation. +# +# This file contains a 'Sample Driver' and is licensed as such +# under the terms of your license agreement with Intel or your +# vendor. This file may be modified by the user, subject to +# the additional terms of the license agreement +# + +[defines] +BASE_NAME = PchPolicyInitPei +FILE_GUID = 20596BCC-EF0D-4772-AB71-C5102620A013 +COMPONENT_TYPE = PE32_PEIM + +[sources.common] + PchPolicyInitPei.h + PchPolicyInitPei.c + ../Common/PchPolicyInitCommon.c + ../Common/PchPolicyInitCommon.h +# +# Edk II Glue Driver Entry Point +# + EdkIIGluePeimEntryPoint.c + +[includes.common] + . + $(EDK_SOURCE)/Foundation/Efi + $(EDK_SOURCE)/Foundation/Include + $(EDK_SOURCE)/Foundation/Efi/Include + $(EDK_SOURCE)/Foundation/Framework/Include + $(EFI_SOURCE)/$(PROJECT_PCH_ROOT) + $(EFI_SOURCE)/$(PROJECT_PCH_ROOT)/Include + $(EFI_SOURCE)/$(PROJECT_PCH_ROOT)/Include/Library + $(EFI_SOURCE)/$(PROJECT_PCH_ROOT)/Ppi/PchPlatformPolicy + $(EFI_SOURCE)/$(PROJECT_RAPID_START_ROOT) + $(EFI_SOURCE)/$(PROJECT_RAPID_START_ROOT)/Include + $(EFI_SOURCE)/$(PROJECT_RAPID_START_ROOT)/Samplecode/Library/RapidStartCommonLib +# +# EDK II Glue Library utilizes some standard headers from EDK +# + $(EFI_SOURCE) + $(EDK_SOURCE)/Foundation + $(EDK_SOURCE)/Foundation/Framework + $(EDK_SOURCE)/Foundation/Include/IndustryStandard + $(EDK_SOURCE)/Foundation/Core/Dxe + $(EDK_SOURCE)/Foundation/Include/Pei + $(EDK_SOURCE)/Foundation/Library/Pei/Include + $(EDK_SOURCE)/Foundation/Library/Dxe/Include + $(EDK_SOURCE)/Foundation/Library/EdkIIGlueLib/Include + $(PLATFORM_ECP_PACKAGE)/Include + +[libraries.common] + $(PROJECT_PCH_FAMILY)PpiLib + EdkFrameworkPpiLib + EdkIIGlueBaseIoLibIntrinsic + EdkIIGlueBaseMemoryLib + EdkIIGluePeiDebugLibReportStatusCode + EdkIIGluePeiReportStatusCodeLib + EdkIIGluePeiServicesLib + EdkIIGluePeiMemoryAllocationLib + EdkPpiLib + PlatformPolicyUpdatePeiLib + RapidStartCommonLib + +[nmake.common] + IMAGE_ENTRY_POINT = _ModuleEntryPoint + DPX_SOURCE = PchPolicyInitPei.dxs +# +# Module Entry Point +# + C_FLAGS = $(C_FLAGS) -D __EDKII_GLUE_MODULE_ENTRY_POINT__=PchPolicyInitPeiEntryPoint + C_FLAGS = $(C_FLAGS) -D __EDKII_GLUE_BASE_IO_LIB_INTRINSIC__ \ + -D __EDKII_GLUE_BASE_MEMORY_LIB__ \ + -D __EDKII_GLUE_PEI_DEBUG_LIB_REPORT_STATUS_CODE__ \ + -D __EDKII_GLUE_PEI_REPORT_STATUS_CODE_LIB__ \ + -D __EDKII_GLUE_PEI_SERVICES_LIB__ \ + -D __EDKII_GLUE_PEI_MEMORY_ALLOCATION_LIB__ |