diff options
Diffstat (limited to 'Core/EM/IdeBus/IdeBus.sdl')
| -rw-r--r-- | Core/EM/IdeBus/IdeBus.sdl | 195 |
1 files changed, 195 insertions, 0 deletions
diff --git a/Core/EM/IdeBus/IdeBus.sdl b/Core/EM/IdeBus/IdeBus.sdl new file mode 100644 index 0000000..2faa756 --- /dev/null +++ b/Core/EM/IdeBus/IdeBus.sdl @@ -0,0 +1,195 @@ +TOKEN + Name = "IdeBus_SUPPORT" + Value = "1" + Help = "Main switch to enable Legacy8259 support in Project" + TokenType = Boolean + TargetEQU = Yes + TargetMAK = Yes + Master = Yes +End + +TOKEN + Name = "MASTER_SLAVE_ENUMERATION" + Value = "1" + Help = "When off, Slave device is detected first and \then Master is detected." + TokenType = Boolean + TargetH = Yes +End + +TOKEN + Name = "IDEBUSMASTER_SUPPORT" + Value = "1" + Help = "Master Switch to enable ATA and ATAPI \Busmaster support.\For ATAPI devices, ATAPI_BUSMASTER_SUPPORT \also needs to be enabled.\MWDMA and UDMA programming in devices \and the controller will be done irrespective of \this switch." + TokenType = Boolean + TargetH = Yes +End + +TOKEN + Name = "ATAPI_BUSMASTER_SUPPORT" + Value = "1" + Help = "Enable/Disable ATAPI Busmaster Support.\If Enabled, Busmastering will be used for ATAPI \devices else PIO transfer. " + TokenType = Boolean + TargetH = Yes + Token = "IDEBUSMASTER_SUPPORT" "=" "1" +End + +TOKEN + Name = "ACOUSTIC_MANAGEMENT_SUPPORT" + Value = "0" + TokenType = Boolean + TargetH = Yes +End + +TOKEN + Name = "IDE_POWER_MANAGEMENT_SUPPORT" + Value = "0" + Help = "Enables IDE Power Management support." + TokenType = Boolean + TargetH = Yes +End + +TOKEN + Name = "STANDBY_TIMEOUT" + Value = "5" + Help = "Standby Timeout value in MINUTES.\A value of ZERO, disables Standby Timer" + TokenType = Integer + TargetH = Yes + Range = "0 - 480" + Token = "IDE_POWER_MANAGEMENT_SUPPORT" "=" "1" +End + +TOKEN + Name = "ADVANCED_POWER_MANAGEMENT_SUPPORT" + Value = "0" + Help = "Enables Advanced Power Managment Support." + TokenType = Boolean + TargetH = Yes + Token = "IDE_POWER_MANAGEMENT_SUPPORT" "=" "1" +End + +TOKEN + Name = "ADVANCED_POWER_MANAGEMENT_LEVEL" + Value = "1" + Help = "Disable : 0\Minimum Power Consumption : 1\Intermediate level with Standy : 2 - 7Fh\Minimum Power Consumption with out Standby : 80h\Intermediate level without Standy : 81 - FDh\Maximum Performance : 0FEh" + TokenType = Integer + TargetH = Yes + Range = "0 - 0FEh" +End + +TOKEN + Name = "POWERUP_IN_STANDBY_SUPPORT" + Value = "0" + TokenType = Boolean + TargetH = Yes + Token = "IDE_POWER_MANAGEMENT_SUPPORT" "=" "1" +End + +TOKEN + Name = "POWERUP_IN_STANDBY_MODE" + Value = "0" + Help = "ON : Device Spins up when powered on.\0FF: Device will not spinup when powered on" + TokenType = Boolean + TargetH = Yes +End + +TOKEN + Name = "IDE_POWER_MANAGEMENT_INTERFACE_SUPPORT" + Value = "0" + Help = "Installs IDE power Management Interface" + TokenType = Boolean + TargetH = Yes + Token = "IDE_POWER_MANAGEMENT_SUPPORT" "=" "1" +End + +TOKEN + Name = "HOST_PROTECTED_AREA_SUPPORT" + Value = "0" + Help = "Enables HOST Protected Area Interface." + TokenType = Boolean + TargetH = Yes +End + +TOKEN + Name = "IDE_HP_SUPPORT" + Value = "0" + Help = "Enables IDE Hot Plug Support." + TokenType = Boolean + TargetH = Yes +End + +TOKEN + Name = "EFI_IDE_PROTOCOL" + Value = "1" + TokenType = Boolean + TargetMAK = Yes + TargetH = Yes +End + +TOKEN + Name = "INTEL_IDE_PROTOCOL" + Value = "$(EFI_IDE_PROTOCOL)" + Help = "For backward compatibility, will keep this token value same as EFI_IDE_PROTOCOL." + TokenType = Boolean + TargetMAK = Yes + TargetH = Yes + Lock = Yes +End + +TOKEN + Name = "AHCI_COMPATIBLE_MODE" + Value = "0" + TokenType = Boolean + TargetMAK = Yes + TargetH = Yes +End + +PATH + Name = "IDEBUS_DIR" +End + +MODULE + Help = "Includes IdeBus.mak to Project" + File = "IdeBus.mak" +End + +ELINK + Name = "$(BUILD_DIR)\IDEBusSrc.ffs" + Parent = "FV_MAIN" + Disable = Yes + InvokeOrder = AfterParent +End + +ELINK + Name = "IdeBusEntryPoint," + Parent = "BdsEntryInitialize" + InvokeOrder = AfterParent +End + +ELINK + Name = "$(IDEBUS_DIR)\IdeBusSrc$(ARCH).lib" + Parent = "IdeBusSrc_LIB" + InvokeOrder = AfterParent +End + +ELINK + Name = "IdeBusSrc_LIB" + InvokeOrder = ReplaceParent +End + +ELINK + Name = "IdeBusBoardEntryPoint," + Parent = "BdsEntryInitialize" + InvokeOrder = ReplaceParent +End + +ELINK + Name = "$(BUILD_DIR)\IdeBusBin.lib" + Parent = "IdeBus_LIB" + InvokeOrder = AfterParent +End + +ELINK + Name = "IdeBus_LIB" + InvokeOrder = ReplaceParent +End + |