diff options
Diffstat (limited to 'EDK/Foundation/Library/EdkIIGlueLib/Library/DxeSmbusLib/SmbusLib.c')
| -rw-r--r-- | EDK/Foundation/Library/EdkIIGlueLib/Library/DxeSmbusLib/SmbusLib.c | 475 |
1 files changed, 475 insertions, 0 deletions
diff --git a/EDK/Foundation/Library/EdkIIGlueLib/Library/DxeSmbusLib/SmbusLib.c b/EDK/Foundation/Library/EdkIIGlueLib/Library/DxeSmbusLib/SmbusLib.c new file mode 100644 index 0000000..00fdf32 --- /dev/null +++ b/EDK/Foundation/Library/EdkIIGlueLib/Library/DxeSmbusLib/SmbusLib.c @@ -0,0 +1,475 @@ +/*++ + +Copyright (c) 2004 - 2006, Intel Corporation +All rights reserved. This program and the accompanying materials +are licensed and made available under the terms and conditions of the BSD License +which accompanies this distribution. The full text of the license may be found at +http://opensource.org/licenses/bsd-license.php + +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + + +Module Name: + + DxeSmbus.c + +Abstract: + + Dxe Smbus Lib Interfaces + +--*/ + +#include "DxeSmbusLibInternal.h" + +/** + Executes an SMBUS quick read command. + + Executes an SMBUS quick read command on the SMBUS device specified by SmBusAddress. + Only the SMBUS slave address field of SmBusAddress is required. + If Status is not NULL, then the status of the executed command is returned in Status. + If PEC is set in SmBusAddress, then ASSERT(). + If Command in SmBusAddress is not zero, then ASSERT(). + If Length in SmBusAddress is not zero, then ASSERT(). + If any reserved bits of SmBusAddress are set, then ASSERT(). + + @param SmBusAddress Address that encodes the SMBUS Slave Address, + SMBUS Command, SMBUS Data Length, and PEC. + @param Status Return status for the executed command. + This is an optional parameter and may be NULL. + +**/ +VOID +EFIAPI +SmBusQuickRead ( + IN UINTN SmBusAddress, + OUT RETURN_STATUS *Status OPTIONAL + ) +{ + ASSERT (!SMBUS_LIB_PEC (SmBusAddress)); + ASSERT (SMBUS_LIB_COMMAND (SmBusAddress) == 0); + ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) == 0); + ASSERT (SMBUS_LIB_RESEARVED (SmBusAddress) == 0); + + InternalSmBusExec (EfiSmbusQuickRead, SmBusAddress, 0, NULL, Status); +} + +/** + Executes an SMBUS quick write command. + + Executes an SMBUS quick write command on the SMBUS device specified by SmBusAddress. + Only the SMBUS slave address field of SmBusAddress is required. + If Status is not NULL, then the status of the executed command is returned in Status. + If PEC is set in SmBusAddress, then ASSERT(). + If Command in SmBusAddress is not zero, then ASSERT(). + If Length in SmBusAddress is not zero, then ASSERT(). + If any reserved bits of SmBusAddress are set, then ASSERT(). + + @param SmBusAddress Address that encodes the SMBUS Slave Address, + SMBUS Command, SMBUS Data Length, and PEC. + @param Status Return status for the executed command. + This is an optional parameter and may be NULL. + +**/ +VOID +EFIAPI +SmBusQuickWrite ( + IN UINTN SmBusAddress, + OUT RETURN_STATUS *Status OPTIONAL + ) +{ + ASSERT (!SMBUS_LIB_PEC (SmBusAddress)); + ASSERT (SMBUS_LIB_COMMAND (SmBusAddress) == 0); + ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) == 0); + ASSERT (SMBUS_LIB_RESEARVED (SmBusAddress) == 0); + + InternalSmBusExec (EfiSmbusQuickWrite, SmBusAddress, 0, NULL, Status); +} + +/** + Executes an SMBUS receive byte command. + + Executes an SMBUS receive byte command on the SMBUS device specified by SmBusAddress. + Only the SMBUS slave address field of SmBusAddress is required. + The byte received from the SMBUS is returned. + If Status is not NULL, then the status of the executed command is returned in Status. + If Command in SmBusAddress is not zero, then ASSERT(). + If Length in SmBusAddress is not zero, then ASSERT(). + If any reserved bits of SmBusAddress are set, then ASSERT(). + + @param SmBusAddress Address that encodes the SMBUS Slave Address, + SMBUS Command, SMBUS Data Length, and PEC. + @param Status Return status for the executed command. + This is an optional parameter and may be NULL. + + @return The byte received from the SMBUS. + +**/ +UINT8 +EFIAPI +SmBusReceiveByte ( + IN UINTN SmBusAddress, + OUT RETURN_STATUS *Status OPTIONAL + ) +{ + UINT8 Byte; + + ASSERT (SMBUS_LIB_COMMAND (SmBusAddress) == 0); + ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) == 0); + ASSERT (SMBUS_LIB_RESEARVED (SmBusAddress) == 0); + + InternalSmBusExec (EfiSmbusReceiveByte, SmBusAddress, 1, &Byte, Status); + + return Byte; +} + +/** + Executes an SMBUS send byte command. + + Executes an SMBUS send byte command on the SMBUS device specified by SmBusAddress. + The byte specified by Value is sent. + Only the SMBUS slave address field of SmBusAddress is required. Value is returned. + If Status is not NULL, then the status of the executed command is returned in Status. + If Command in SmBusAddress is not zero, then ASSERT(). + If Length in SmBusAddress is not zero, then ASSERT(). + If any reserved bits of SmBusAddress are set, then ASSERT(). + + @param SmBusAddress Address that encodes the SMBUS Slave Address, + SMBUS Command, SMBUS Data Length, and PEC. + @param Value The 8-bit value to send. + @param Status Return status for the executed command. + This is an optional parameter and may be NULL. + + @return The parameter of Value. + +**/ +UINT8 +EFIAPI +SmBusSendByte ( + IN UINTN SmBusAddress, + IN UINT8 Value, + OUT RETURN_STATUS *Status OPTIONAL + ) +{ + UINT8 Byte; + + ASSERT (SMBUS_LIB_COMMAND (SmBusAddress) == 0); + ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) == 0); + ASSERT (SMBUS_LIB_RESEARVED (SmBusAddress) == 0); + + Byte = Value; + InternalSmBusExec (EfiSmbusSendByte, SmBusAddress, 1, &Byte, Status); + + return Value; +} + +/** + Executes an SMBUS read data byte command. + + Executes an SMBUS read data byte command on the SMBUS device specified by SmBusAddress. + Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required. + The 8-bit value read from the SMBUS is returned. + If Status is not NULL, then the status of the executed command is returned in Status. + If Length in SmBusAddress is not zero, then ASSERT(). + If any reserved bits of SmBusAddress are set, then ASSERT(). + + @param SmBusAddress Address that encodes the SMBUS Slave Address, + SMBUS Command, SMBUS Data Length, and PEC. + @param Status Return status for the executed command. + This is an optional parameter and may be NULL. + + @return The byte read from the SMBUS. + +**/ +UINT8 +EFIAPI +SmBusReadDataByte ( + IN UINTN SmBusAddress, + OUT RETURN_STATUS *Status OPTIONAL + ) +{ + UINT8 Byte; + + ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) == 0); + ASSERT (SMBUS_LIB_RESEARVED (SmBusAddress) == 0); + + InternalSmBusExec (EfiSmbusReadByte, SmBusAddress, 1, &Byte, Status); + + return Byte; +} + +/** + Executes an SMBUS write data byte command. + + Executes an SMBUS write data byte command on the SMBUS device specified by SmBusAddress. + The 8-bit value specified by Value is written. + Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required. + Value is returned. + If Status is not NULL, then the status of the executed command is returned in Status. + If Length in SmBusAddress is not zero, then ASSERT(). + If any reserved bits of SmBusAddress are set, then ASSERT(). + + @param SmBusAddress Address that encodes the SMBUS Slave Address, + SMBUS Command, SMBUS Data Length, and PEC. + @param Value The 8-bit value to write. + @param Status Return status for the executed command. + This is an optional parameter and may be NULL. + + @return The parameter of Value. + +**/ +UINT8 +EFIAPI +SmBusWriteDataByte ( + IN UINTN SmBusAddress, + IN UINT8 Value, + OUT RETURN_STATUS *Status OPTIONAL + ) +{ + UINT8 Byte; + + ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) == 0); + ASSERT (SMBUS_LIB_RESEARVED (SmBusAddress) == 0); + + Byte = Value; + InternalSmBusExec (EfiSmbusWriteByte, SmBusAddress, 1, &Byte, Status); + + return Value; +} + +/** + Executes an SMBUS read data word command. + + Executes an SMBUS read data word command on the SMBUS device specified by SmBusAddress. + Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required. + The 16-bit value read from the SMBUS is returned. + If Status is not NULL, then the status of the executed command is returned in Status. + If Length in SmBusAddress is not zero, then ASSERT(). + If any reserved bits of SmBusAddress are set, then ASSERT(). + + @param SmBusAddress Address that encodes the SMBUS Slave Address, + SMBUS Command, SMBUS Data Length, and PEC. + @param Status Return status for the executed command. + This is an optional parameter and may be NULL. + + @return The byte read from the SMBUS. + +**/ +UINT16 +EFIAPI +SmBusReadDataWord ( + IN UINTN SmBusAddress, + OUT RETURN_STATUS *Status OPTIONAL + ) +{ + UINT16 Word; + + ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) == 0); + ASSERT (SMBUS_LIB_RESEARVED (SmBusAddress) == 0); + + InternalSmBusExec (EfiSmbusReadWord, SmBusAddress, 2, &Word, Status); + + return Word; +} + +/** + Executes an SMBUS write data word command. + + Executes an SMBUS write data word command on the SMBUS device specified by SmBusAddress. + The 16-bit value specified by Value is written. + Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required. + Value is returned. + If Status is not NULL, then the status of the executed command is returned in Status. + If Length in SmBusAddress is not zero, then ASSERT(). + If any reserved bits of SmBusAddress are set, then ASSERT(). + + @param SmBusAddress Address that encodes the SMBUS Slave Address, + SMBUS Command, SMBUS Data Length, and PEC. + @param Value The 16-bit value to write. + @param Status Return status for the executed command. + This is an optional parameter and may be NULL. + + @return The parameter of Value. + +**/ +UINT16 +EFIAPI +SmBusWriteDataWord ( + IN UINTN SmBusAddress, + IN UINT16 Value, + OUT RETURN_STATUS *Status OPTIONAL + ) +{ + UINT16 Word; + + ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) == 0); + ASSERT (SMBUS_LIB_RESEARVED (SmBusAddress) == 0); + + Word = Value; + InternalSmBusExec (EfiSmbusWriteWord, SmBusAddress, 2, &Word, Status); + + return Value; +} + +/** + Executes an SMBUS process call command. + + Executes an SMBUS process call command on the SMBUS device specified by SmBusAddress. + The 16-bit value specified by Value is written. + Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required. + The 16-bit value returned by the process call command is returned. + If Status is not NULL, then the status of the executed command is returned in Status. + If Length in SmBusAddress is not zero, then ASSERT(). + If any reserved bits of SmBusAddress are set, then ASSERT(). + + @param SmBusAddress Address that encodes the SMBUS Slave Address, + SMBUS Command, SMBUS Data Length, and PEC. + @param Value The 16-bit value to write. + @param Status Return status for the executed command. + This is an optional parameter and may be NULL. + + @return The 16-bit value returned by the process call command. + +**/ +UINT16 +EFIAPI +SmBusProcessCall ( + IN UINTN SmBusAddress, + IN UINT16 Value, + OUT RETURN_STATUS *Status OPTIONAL + ) +{ + ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) == 0); + ASSERT (SMBUS_LIB_RESEARVED (SmBusAddress) == 0); + + InternalSmBusExec (EfiSmbusProcessCall, SmBusAddress, 2, &Value, Status); + + return Value; +} + +/** + Executes an SMBUS read block command. + + Executes an SMBUS read block command on the SMBUS device specified by SmBusAddress. + Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required. + Bytes are read from the SMBUS and stored in Buffer. + The number of bytes read is returned, and will never return a value larger than 32-bytes. + If Status is not NULL, then the status of the executed command is returned in Status. + It is the caller's responsibility to make sure Buffer is large enough for the total number of bytes read. + SMBUS supports a maximum transfer size of 32 bytes, so Buffer does not need to be any larger than 32 bytes. + If Length in SmBusAddress is not zero, then ASSERT(). + If Buffer is NULL, then ASSERT(). + If any reserved bits of SmBusAddress are set, then ASSERT(). + + @param SmBusAddress Address that encodes the SMBUS Slave Address, + SMBUS Command, SMBUS Data Length, and PEC. + @param Buffer Pointer to the buffer to store the bytes read from the SMBUS. + @param Status Return status for the executed command. + This is an optional parameter and may be NULL. + + @return The number of bytes read. + +**/ +UINTN +EFIAPI +SmBusReadBlock ( + IN UINTN SmBusAddress, + OUT VOID *Buffer, + OUT RETURN_STATUS *Status OPTIONAL + ) +{ + ASSERT (Buffer != NULL); + ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) == 0); + ASSERT (SMBUS_LIB_RESEARVED (SmBusAddress) == 0); + + return InternalSmBusExec (EfiSmbusReadBlock, SmBusAddress, 0x20, Buffer, Status); +} + +/** + Executes an SMBUS write block command. + + Executes an SMBUS write block command on the SMBUS device specified by SmBusAddress. + The SMBUS slave address, SMBUS command, and SMBUS length fields of SmBusAddress are required. + Bytes are written to the SMBUS from Buffer. + The number of bytes written is returned, and will never return a value larger than 32-bytes. + If Status is not NULL, then the status of the executed command is returned in Status. + If Length in SmBusAddress is zero or greater than 32, then ASSERT(). + If Buffer is NULL, then ASSERT(). + If any reserved bits of SmBusAddress are set, then ASSERT(). + + @param SmBusAddress Address that encodes the SMBUS Slave Address, + SMBUS Command, SMBUS Data Length, and PEC. + @param Buffer Pointer to the buffer to store the bytes read from the SMBUS. + @param Status Return status for the executed command. + This is an optional parameter and may be NULL. + + @return The number of bytes written. + +**/ +UINTN +EFIAPI +SmBusWriteBlock ( + IN UINTN SmBusAddress, + OUT VOID *Buffer, + OUT RETURN_STATUS *Status OPTIONAL + ) +{ + UINTN Length; + + ASSERT (Buffer != NULL); + ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) >= 1); + ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) <= 32); + ASSERT (SMBUS_LIB_RESEARVED (SmBusAddress) == 0); + + Length = SMBUS_LIB_LENGTH (SmBusAddress); + return InternalSmBusExec (EfiSmbusWriteBlock, SmBusAddress, Length, Buffer, Status); +} + +/** + Executes an SMBUS block process call command. + + Executes an SMBUS block process call command on the SMBUS device specified by SmBusAddress. + The SMBUS slave address, SMBUS command, and SMBUS length fields of SmBusAddress are required. + Bytes are written to the SMBUS from WriteBuffer. Bytes are then read from the SMBUS into ReadBuffer. + If Status is not NULL, then the status of the executed command is returned in Status. + It is the caller's responsibility to make sure ReadBuffer is large enough for the total number of bytes read. + SMBUS supports a maximum transfer size of 32 bytes, so Buffer does not need to be any larger than 32 bytes. + If Length in SmBusAddress is zero or greater than 32, then ASSERT(). + If WriteBuffer is NULL, then ASSERT(). + If ReadBuffer is NULL, then ASSERT(). + If any reserved bits of SmBusAddress are set, then ASSERT(). + + @param SmBusAddress Address that encodes the SMBUS Slave Address, + SMBUS Command, SMBUS Data Length, and PEC. + @param WriteBuffer Pointer to the buffer of bytes to write to the SMBUS. + @param ReadBuffer Pointer to the buffer of bytes to read from the SMBUS. + @param Status Return status for the executed command. + This is an optional parameter and may be NULL. + + @return The number of bytes written. + +**/ +UINTN +EFIAPI +SmBusBlockProcessCall ( + IN UINTN SmBusAddress, + IN VOID *WriteBuffer, + OUT VOID *ReadBuffer, + OUT RETURN_STATUS *Status OPTIONAL + ) +{ + UINTN Length; + + ASSERT (WriteBuffer != NULL); + ASSERT (ReadBuffer != NULL); + ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) >= 1); + ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) <= 32); + ASSERT (SMBUS_LIB_RESEARVED (SmBusAddress) == 0); + + Length = SMBUS_LIB_LENGTH (SmBusAddress); + // + // Assuming that ReadBuffer is large enough to save another memory copy. + // + ReadBuffer = CopyMem (ReadBuffer, WriteBuffer, Length); + return InternalSmBusExec (EfiSmbusBWBRProcessCall, SmBusAddress, Length, ReadBuffer, Status); +} |