import the U-Boot code and make it compile

1 files changed, 225 insertions, 0 deletions

diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h
new file mode 100644
index 0000000..e153dfb
--- /dev/null
+++ b/include/configs/mx35pdk.h
@@ -0,0 +1,225 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2010, Stefano Babic <sbabic@denx.de>
+ *
+ * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
+ *
+ * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
+ *
+ * Configuration for the MX35pdk Freescale board.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/arch/imx-regs.h>
+
+ /* High Level Configuration Options */
+#define CONFIG_MX35
+
+#define CONFIG_SYS_FSL_CLK
+
+/* Set TEXT at the beginning of the NOR flash */
+
+#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
+#define CONFIG_REVISION_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 1024 * 1024)
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
+#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
+
+/*
+ * PMIC Configs
+ */
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_FSL
+#define CONFIG_POWER_FSL_MC13892
+#define CONFIG_SYS_FSL_PMIC_I2C_ADDR	0x08
+#define CONFIG_RTC_MC13XXX
+
+/*
+ * MFD MC9SDZ60
+ */
+#define CONFIG_FSL_MC9SDZ60
+#define CONFIG_SYS_FSL_MC9SDZ60_I2C_ADDR	0x69
+
+/*
+ * UART (console)
+ */
+#define CONFIG_MXC_UART
+#define CONFIG_MXC_UART_BASE	UART1_BASE
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+/*
+ * Command definition
+ */
+
+#define CONFIG_NET_RETRY_COUNT	100
+
+
+#define CONFIG_LOADADDR		0x80800000	/* loadaddr env var */
+
+/*
+ * Ethernet on the debug board (SMC911)
+ */
+#define CONFIG_HAS_ETH1
+#define CONFIG_ETHPRIME
+
+/*
+ * Ethernet on SOC (FEC)
+ */
+#define CONFIG_FEC_MXC
+#define IMX_FEC_BASE	FEC_BASE_ADDR
+#define CONFIG_FEC_MXC_PHYADDR	0x1F
+
+#define CONFIG_ARP_TIMEOUT	200UL
+
+/*
+ * Miscellaneous configurable options
+ */
+
+#define CONFIG_SYS_MEMTEST_START	0	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x10000
+
+#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
+
+/*
+ * Physical Memory Map
+ */
+#define PHYS_SDRAM_1		CSD0_BASE_ADDR
+#define PHYS_SDRAM_1_SIZE	(128 * 1024 * 1024)
+#define PHYS_SDRAM_2		CSD1_BASE_ADDR
+#define PHYS_SDRAM_2_SIZE	(128 * 1024 * 1024)
+
+#define CONFIG_SYS_SDRAM_BASE		CSD0_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_ADDR	(IRAM_BASE_ADDR + 0x10000)
+#define CONFIG_SYS_INIT_RAM_SIZE		(IRAM_SIZE / 2)
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
+					GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
+					CONFIG_SYS_GBL_DATA_OFFSET)
+
+/*
+ * MTD Command for mtdparts
+ */
+
+/*
+ * FLASH and environment organization
+ */
+#define CONFIG_SYS_FLASH_BASE		CS0_BASE_ADDR
+#define CONFIG_SYS_MAX_FLASH_BANKS 1	/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT 512	/* max number of sectors on one chip */
+/* Monitor at beginning of flash */
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)
+
+#define CONFIG_ENV_SECT_SIZE	(128 * 1024)
+#define CONFIG_ENV_SIZE		CONFIG_ENV_SECT_SIZE
+
+/* Address and size of Redundant Environment Sector	*/
+#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	CONFIG_ENV_SIZE
+
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + \
+				CONFIG_SYS_MONITOR_LEN)
+
+#if defined(CONFIG_FSL_ENV_IN_NAND)
+	#define CONFIG_ENV_OFFSET       (1024 * 1024)
+#endif
+
+/*
+ * CFI FLASH driver setup
+ */
+
+/* A non-standard buffered write algorithm */
+#define CONFIG_FLASH_SPANSION_S29WS_N
+
+/*
+ * NAND FLASH driver setup
+ */
+#define CONFIG_MXC_NAND_REGS_BASE	(NFC_BASE_ADDR)
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_NAND_BASE		(NFC_BASE_ADDR)
+#define CONFIG_MXC_NAND_HWECC
+#define CONFIG_SYS_NAND_LARGEPAGE
+
+/* EHCI driver */
+#define CONFIG_EHCI_IS_TDI
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_USB_EHCI_MXC
+#define CONFIG_MXC_USB_PORT	0
+#define CONFIG_MXC_USB_FLAGS	(MXC_EHCI_INTERFACE_DIFF_UNI | \
+				 MXC_EHCI_POWER_PINS_ENABLED | \
+				 MXC_EHCI_OC_PIN_ACTIVE_LOW)
+#define CONFIG_MXC_USB_PORTSC	(MXC_EHCI_UTMI_16BIT | MXC_EHCI_MODE_UTMI)
+
+/* mmc driver */
+#define CONFIG_SYS_FSL_ESDHC_ADDR	0
+#define CONFIG_SYS_FSL_ESDHC_NUM	1
+
+/*
+ * Default environment and default scripts
+ * to update uboot and load kernel
+ */
+
+#define CONFIG_HOSTNAME "mx35pdk"
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+	"netdev=eth1\0"							\
+	"ethprime=smc911x\0"						\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=${serverip}:${rootpath}\0"			\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"addip_sta=setenv bootargs ${bootargs} "			\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
+		":${hostname}:${netdev}:off panic=1\0"			\
+	"addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0"		\
+	"addip=if test -n ${ipdyn};then run addip_dyn;"			\
+		"else run addip_sta;fi\0"				\
+	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"		\
+	"addtty=setenv bootargs ${bootargs}"				\
+		" console=ttymxc0,${baudrate}\0"			\
+	"addmisc=setenv bootargs ${bootargs} ${misc}\0"			\
+	"loadaddr=80800000\0"						\
+	"kernel_addr_r=80800000\0"					\
+	"hostname=" CONFIG_HOSTNAME "\0"			\
+	"bootfile=" CONFIG_HOSTNAME "/uImage\0"		\
+	"ramdisk_file=" CONFIG_HOSTNAME "/uRamdisk\0"	\
+	"flash_self=run ramargs addip addtty addmtd addmisc;"		\
+		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
+	"flash_nfs=run nfsargs addip addtty addmtd addmisc;"		\
+		"bootm ${kernel_addr}\0"				\
+	"net_nfs=tftp ${kernel_addr_r} ${bootfile}; "			\
+		"run nfsargs addip addtty addmtd addmisc;"		\
+		"bootm ${kernel_addr_r}\0"				\
+	"net_self_load=tftp ${kernel_addr_r} ${bootfile};"		\
+		"tftp ${ramdisk_addr_r} ${ramdisk_file};\0"		\
+	"u-boot=" CONFIG_HOSTNAME "/u-boot.bin\0"		\
+	"load=tftp ${loadaddr} ${u-boot}\0"				\
+	"uboot_addr=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0"		\
+	"update=protect off ${uboot_addr} +80000;"			\
+		"erase ${uboot_addr} +80000;"				\
+		"cp.b ${loadaddr} ${uboot_addr} ${filesize}\0"		\
+	"upd=if run load;then echo Updating u-boot;if run update;"	\
+		"then echo U-Boot updated;"				\
+			"else echo Error updating u-boot !;"		\
+			"echo Board without bootloader !!;"		\
+		"fi;"							\
+		"else echo U-Boot not downloaded..exiting;fi\0"		\
+	"bootcmd=run net_nfs\0"
+
+#endif				/* __CONFIG_H */