import the U-Boot code and make it compile

9 files changed, 1062 insertions, 0 deletions

diff --git a/include/faraday/ftahbc020s.h b/include/faraday/ftahbc020s.h
new file mode 100644
index 0000000..e628156
--- /dev/null
+++ b/include/faraday/ftahbc020s.h
@@ -0,0 +1,46 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2011 Andes Technology Corporation
+ * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
+ */
+
+/* FTAHBC020S - AHB Controller (Arbiter/Decoder) definitions */
+#ifndef __FTAHBC020S_H
+#define __FTAHBC202S_H
+
+/* Registers Offsets */
+
+/*
+ * AHB Slave BSR, offset: n * 4, n=0~31
+ */
+#ifndef __ASSEMBLY__
+struct ftahbc02s {
+	unsigned int	s_bsr[32];	/* 0x00-0x7c - Slave n Base/Size Reg */
+	unsigned int	pcr;		/* 0x80	- Priority Ctrl Reg */
+	unsigned int	tcrg;		/* 0x84	- Transfer Ctrl Reg */
+	unsigned int	cr;		/* 0x88	- Ctrl Reg */
+};
+#endif /* __ASSEMBLY__ */
+
+/*
+ * FTAHBC020S_SLAVE_BSR - Slave n Base / Size Register
+ */
+#define FTAHBC020S_SLAVE_BSR_BASE(x)	(((x) & 0xfff) << 20)
+#define FTAHBC020S_SLAVE_BSR_SIZE(x)	(((x) & 0xf) << 16)
+/* The value of b(16:19)SLAVE_BSR_SIZE: 1M-2048M, must be power of 2 */
+#define FTAHBC020S_BSR_SIZE(x)		(ffs(x) - 1)	/* size of Addr Space */
+
+/*
+ * FTAHBC020S_PCR - Priority Control Register
+ */
+#define FTAHBC020S_PCR_PLEVEL_(x)	(1 << (x))	/* x: 1-15 */
+
+/*
+ * FTAHBC020S_CR - Interrupt Control Register
+ */
+#define FTAHBC020S_CR_INTSTS	(1 << 24)
+#define FTAHBC020S_CR_RESP(x)	(((x) & 0x3) << 20)
+#define FTAHBC020S_CR_INTSMASK	(1 << 16)
+#define FTAHBC020S_CR_REMAP	(1 << 0)
+
+#endif	/* __FTAHBC020S_H */
diff --git a/include/faraday/ftpci100.h b/include/faraday/ftpci100.h
new file mode 100644
index 0000000..b4a43f8
--- /dev/null
+++ b/include/faraday/ftpci100.h
@@ -0,0 +1,83 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Faraday FTPCI100 PCI Bridge Controller Device Driver Implementation
+ *
+ * Copyright (C) 2010 Andes Technology Corporation
+ * Gavin Guo, Andes Technology Corporation <gavinguo@andestech.com>
+ * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
+ */
+
+#ifndef __FTPCI100_H
+#define __FTPCI100_H
+
+/* AHB Control Registers */
+struct ftpci100_ahbc {
+	unsigned int iosize;		/* 0x00 - I/O Space Size Signal */
+	unsigned int prot;		/* 0x04 - AHB Protection */
+	unsigned int rsved[8];		/* 0x08-0x24 - Reserved */
+	unsigned int conf;		/* 0x28 - PCI Configuration */
+	unsigned int data;		/* 0x2c - PCI Configuration DATA */
+};
+
+/*
+ * FTPCI100_IOSIZE_REG's constant definitions
+ */
+#define FTPCI100_BASE_IO_SIZE(x)	(ffs(x) - 1)	/* 1M - 2048M */
+
+/*
+ * PCI Configuration Register
+ */
+#define PCI_INT_MASK			0x4c
+#define PCI_MEM_BASE_SIZE1		0x50
+#define PCI_MEM_BASE_SIZE2		0x54
+#define PCI_MEM_BASE_SIZE3		0x58
+
+/*
+ * PCI_INT_MASK's bit definitions
+ */
+#define PCI_INTA_ENABLE			(1 << 22)
+#define PCI_INTB_ENABLE			(1 << 23)
+#define PCI_INTC_ENABLE			(1 << 24)
+#define PCI_INTD_ENABLE			(1 << 25)
+
+/*
+ * PCI_MEM_BASE_SIZE1's constant definitions
+ */
+#define FTPCI100_BASE_ADR_SIZE(x)	((ffs(x) - 1) << 16)	/* 1M - 2048M */
+
+#define FTPCI100_MAX_FUNCTIONS		20
+#define PCI_IRQ_LINES			4
+
+#define MAX_BUS_NUM			256
+#define MAX_DEV_NUM			32
+#define MAX_FUN_NUM			8
+
+#define PCI_MAX_BAR_PER_FUNC		6
+
+/*
+ * PCI_MEM_SIZE
+ */
+#define FTPCI100_MEM_SIZE(x)		(ffs(x) << 24)
+
+/* This definition is used by pci_ftpci_init() */
+#define FTPCI100_BRIDGE_VENDORID		0x159b
+#define FTPCI100_BRIDGE_DEVICEID		0x4321
+
+void pci_ftpci_init(void);
+
+struct pcibar {
+	unsigned int size;
+	unsigned int addr;
+};
+
+struct pci_config {
+	unsigned int bus;
+	unsigned int dev;				/* device */
+	unsigned int func;
+	unsigned int pin;
+	unsigned short v_id;				/* vendor id */
+	unsigned short d_id;				/* device id */
+	struct pcibar bar[PCI_MAX_BAR_PER_FUNC + 1];
+};
+
+#endif
diff --git a/include/faraday/ftpmu010.h b/include/faraday/ftpmu010.h
new file mode 100644
index 0000000..8fc81f9
--- /dev/null
+++ b/include/faraday/ftpmu010.h
@@ -0,0 +1,234 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2009 Faraday Technology
+ * Po-Yu Chuang <ratbert@faraday-tech.com>
+ */
+
+/*
+ * Power Management Unit
+ */
+#ifndef __FTPMU010_H
+#define __FTPMU010_H
+
+#ifndef __ASSEMBLY__
+struct ftpmu010 {
+	unsigned int	IDNMBR0;	/* 0x00 */
+	unsigned int	reserved0;	/* 0x04 */
+	unsigned int	OSCC;		/* 0x08 */
+	unsigned int	PMODE;		/* 0x0C */
+	unsigned int	PMCR;		/* 0x10 */
+	unsigned int	PED;		/* 0x14 */
+	unsigned int	PEDSR;		/* 0x18 */
+	unsigned int	reserved1;	/* 0x1C */
+	unsigned int	PMSR;		/* 0x20 */
+	unsigned int	PGSR;		/* 0x24 */
+	unsigned int	MFPSR;		/* 0x28 */
+	unsigned int	MISC;		/* 0x2C */
+	unsigned int	PDLLCR0;	/* 0x30 */
+	unsigned int	PDLLCR1;	/* 0x34 */
+	unsigned int	AHBMCLKOFF;	/* 0x38 */
+	unsigned int	APBMCLKOFF;	/* 0x3C */
+	unsigned int	DCSRCR0;	/* 0x40 */
+	unsigned int	DCSRCR1;	/* 0x44 */
+	unsigned int	DCSRCR2;	/* 0x48 */
+	unsigned int	SDRAMHTC;	/* 0x4C */
+	unsigned int	PSPR0;		/* 0x50 */
+	unsigned int	PSPR1;		/* 0x54 */
+	unsigned int	PSPR2;		/* 0x58 */
+	unsigned int	PSPR3;		/* 0x5C */
+	unsigned int	PSPR4;		/* 0x60 */
+	unsigned int	PSPR5;		/* 0x64 */
+	unsigned int	PSPR6;		/* 0x68 */
+	unsigned int	PSPR7;		/* 0x6C */
+	unsigned int	PSPR8;		/* 0x70 */
+	unsigned int	PSPR9;		/* 0x74 */
+	unsigned int	PSPR10;		/* 0x78 */
+	unsigned int	PSPR11;		/* 0x7C */
+	unsigned int	PSPR12;		/* 0x80 */
+	unsigned int	PSPR13;		/* 0x84 */
+	unsigned int	PSPR14;		/* 0x88 */
+	unsigned int	PSPR15;		/* 0x8C */
+	unsigned int	AHBDMA_RACCS;	/* 0x90 */
+	unsigned int	reserved2;	/* 0x94 */
+	unsigned int	reserved3;	/* 0x98 */
+	unsigned int	JSS;		/* 0x9C */
+	unsigned int	CFC_RACC;	/* 0xA0 */
+	unsigned int	SSP1_RACC;	/* 0xA4 */
+	unsigned int	UART1TX_RACC;	/* 0xA8 */
+	unsigned int	UART1RX_RACC;	/* 0xAC */
+	unsigned int	UART2TX_RACC;	/* 0xB0 */
+	unsigned int	UART2RX_RACC;	/* 0xB4 */
+	unsigned int	SDC_RACC;	/* 0xB8 */
+	unsigned int	I2SAC97_RACC;	/* 0xBC */
+	unsigned int	IRDATX_RACC;	/* 0xC0 */
+	unsigned int	reserved4;	/* 0xC4 */
+	unsigned int	USBD_RACC;	/* 0xC8 */
+	unsigned int	IRDARX_RACC;	/* 0xCC */
+	unsigned int	IRDA_RACC;	/* 0xD0 */
+	unsigned int	ED0_RACC;	/* 0xD4 */
+	unsigned int	ED1_RACC;	/* 0xD8 */
+};
+#endif /* __ASSEMBLY__ */
+
+/*
+ * ID Number 0 Register
+ */
+#define FTPMU010_ID_A320A	0x03200000
+#define FTPMU010_ID_A320C	0x03200010
+#define FTPMU010_ID_A320D	0x03200030
+
+/*
+ * OSC Control Register
+ */
+#define FTPMU010_OSCC_OSCH_TRI		(1 << 11)
+#define FTPMU010_OSCC_OSCH_STABLE	(1 << 9)
+#define FTPMU010_OSCC_OSCH_OFF		(1 << 8)
+
+#define FTPMU010_OSCC_OSCL_TRI		(1 << 3)
+#define FTPMU010_OSCC_OSCL_RTCLSEL	(1 << 2)
+#define FTPMU010_OSCC_OSCL_STABLE	(1 << 1)
+#define FTPMU010_OSCC_OSCL_OFF		(1 << 0)
+
+/*
+ * Power Mode Register
+ */
+#define FTPMU010_PMODE_DIVAHBCLK_MASK	(0x7 << 4)
+#define FTPMU010_PMODE_DIVAHBCLK_2	(0x0 << 4)
+#define FTPMU010_PMODE_DIVAHBCLK_3	(0x1 << 4)
+#define FTPMU010_PMODE_DIVAHBCLK_4	(0x2 << 4)
+#define FTPMU010_PMODE_DIVAHBCLK_6	(0x3 << 4)
+#define FTPMU010_PMODE_DIVAHBCLK_8	(0x4 << 4)
+#define FTPMU010_PMODE_DIVAHBCLK(pmode)	(((pmode) >> 4) & 0x7)
+#define FTPMU010_PMODE_FCS		(1 << 2)
+#define FTPMU010_PMODE_TURBO		(1 << 1)
+#define FTPMU010_PMODE_SLEEP		(1 << 0)
+
+/*
+ * Power Manager Status Register
+ */
+#define FTPMU010_PMSR_SMR	(1 << 10)
+
+#define FTPMU010_PMSR_RDH	(1 << 2)
+#define FTPMU010_PMSR_PH	(1 << 1)
+#define FTPMU010_PMSR_CKEHLOW	(1 << 0)
+
+/*
+ * Multi-Function Port Setting Register
+ */
+#define FTPMU010_MFPSR_DEBUGSEL		(1 << 17)
+#define FTPMU010_MFPSR_DMA0PINSEL	(1 << 16)
+#define FTPMU010_MFPSR_DMA1PINSEL	(1 << 15)
+#define FTPMU010_MFPSR_MODEMPINSEL	(1 << 14)
+#define FTPMU010_MFPSR_AC97CLKOUTSEL	(1 << 13)
+#define FTPMU010_MFPSR_PWM1PINSEL	(1 << 11)
+#define FTPMU010_MFPSR_PWM0PINSEL	(1 << 10)
+#define FTPMU010_MFPSR_IRDACLKSEL	(1 << 9)
+#define FTPMU010_MFPSR_UARTCLKSEL	(1 << 8)
+#define FTPMU010_MFPSR_SSPCLKSEL	(1 << 6)
+#define FTPMU010_MFPSR_I2SCLKSEL	(1 << 5)
+#define FTPMU010_MFPSR_AC97CLKSEL	(1 << 4)
+#define FTPMU010_MFPSR_AC97PINSEL	(1 << 3)
+#define FTPMU010_MFPSR_TRIAHBDIS	(1 << 1)
+#define FTPMU010_MFPSR_TRIAHBDBG	(1 << 0)
+
+/*
+ * PLL/DLL Control Register 0
+ * Note:
+ *  1. FTPMU010_PDLLCR0_HCLKOUTDIS:
+ *	Datasheet indicated it starts at bit #21 which was wrong.
+ *  2. FTPMU010_PDLLCR0_DLLFRAG:
+ * 	Datasheet indicated it has 2 bit which was wrong.
+ */
+#define FTPMU010_PDLLCR0_HCLKOUTDIS(cr0)	(((cr0) & 0xf) << 20)
+#define FTPMU010_PDLLCR0_DLLFRAG(cr0)		(1 << 19)
+#define FTPMU010_PDLLCR0_DLLSTSEL		(1 << 18)
+#define FTPMU010_PDLLCR0_DLLSTABLE		(1 << 17)
+#define FTPMU010_PDLLCR0_DLLDIS			(1 << 16)
+#define FTPMU010_PDLLCR0_PLL1FRANG(cr0)		(((cr0) & 0x3) << 12)
+#define FTPMU010_PDLLCR0_PLL1NS(cr0)		(((cr0) & 0x1ff) << 3)
+#define FTPMU010_PDLLCR0_PLL1STSEL		(1 << 2)
+#define FTPMU010_PDLLCR0_PLL1STABLE		(1 << 1)
+#define FTPMU010_PDLLCR0_PLL1DIS		(1 << 0)
+
+/*
+ * SDRAM Signal Hold Time Control Register
+ */
+#define FTPMU010_SDRAMHTC_RCLK_DLY(x)		(((x) & 0xf) << 28)
+#define FTPMU010_SDRAMHTC_CTL_WCLK_DLY(x)	(((x) & 0xf) << 24)
+#define FTPMU010_SDRAMHTC_DAT_WCLK_DLY(x)	(((x) & 0xf) << 20)
+#define FTPMU010_SDRAMHTC_EBICTRL_DCSR		(1 << 18)
+#define FTPMU010_SDRAMHTC_EBIDATA_DCSR		(1 << 17)
+#define FTPMU010_SDRAMHTC_SDRAMCS_DCSR		(1 << 16)
+#define FTPMU010_SDRAMHTC_SDRAMCTL_DCSR		(1 << 15)
+#define FTPMU010_SDRAMHTC_CKE_DCSR		(1 << 14)
+#define FTPMU010_SDRAMHTC_DQM_DCSR		(1 << 13)
+#define FTPMU010_SDRAMHTC_SDCLK_DCSR		(1 << 12)
+
+#ifndef __ASSEMBLY__
+void ftpmu010_32768osc_enable(void);
+void ftpmu010_dlldis_disable(void);
+void ftpmu010_mfpsr_diselect_dev(unsigned int dev);
+void ftpmu010_mfpsr_select_dev(unsigned int dev);
+void ftpmu010_sdram_clk_disable(unsigned int cr0);
+void ftpmu010_sdramhtc_set(unsigned int val);
+#endif
+
+#ifdef __ASSEMBLY__
+#define FTPMU010_IDNMBR0	0x00
+#define FTPMU010_reserved0	0x04
+#define FTPMU010_OSCC		0x08
+#define FTPMU010_PMODE		0x0C
+#define FTPMU010_PMCR		0x10
+#define FTPMU010_PED		0x14
+#define FTPMU010_PEDSR		0x18
+#define FTPMU010_reserved1	0x1C
+#define FTPMU010_PMSR		0x20
+#define FTPMU010_PGSR		0x24
+#define FTPMU010_MFPSR		0x28
+#define FTPMU010_MISC		0x2C
+#define FTPMU010_PDLLCR0	0x30
+#define FTPMU010_PDLLCR1	0x34
+#define FTPMU010_AHBMCLKOFF	0x38
+#define FTPMU010_APBMCLKOFF	0x3C
+#define FTPMU010_DCSRCR0	0x40
+#define FTPMU010_DCSRCR1	0x44
+#define FTPMU010_DCSRCR2	0x48
+#define FTPMU010_SDRAMHTC	0x4C
+#define FTPMU010_PSPR0		0x50
+#define FTPMU010_PSPR1		0x54
+#define FTPMU010_PSPR2		0x58
+#define FTPMU010_PSPR3		0x5C
+#define FTPMU010_PSPR4		0x60
+#define FTPMU010_PSPR5		0x64
+#define FTPMU010_PSPR6		0x68
+#define FTPMU010_PSPR7		0x6C
+#define FTPMU010_PSPR8		0x70
+#define FTPMU010_PSPR9		0x74
+#define FTPMU010_PSPR10		0x78
+#define FTPMU010_PSPR11		0x7C
+#define FTPMU010_PSPR12		0x80
+#define FTPMU010_PSPR13		0x84
+#define FTPMU010_PSPR14		0x88
+#define FTPMU010_PSPR15		0x8C
+#define FTPMU010_AHBDMA_RACCS	0x90
+#define FTPMU010_reserved2	0x94
+#define FTPMU010_reserved3	0x98
+#define FTPMU010_JSS		0x9C
+#define FTPMU010_CFC_RACC	0xA0
+#define FTPMU010_SSP1_RACC	0xA4
+#define FTPMU010_UART1TX_RACC	0xA8
+#define FTPMU010_UART1RX_RACC	0xAC
+#define FTPMU010_UART2TX_RACC	0xB0
+#define FTPMU010_UART2RX_RACC	0xB4
+#define FTPMU010_SDC_RACC	0xB8
+#define FTPMU010_I2SAC97_RACC	0xBC
+#define FTPMU010_IRDATX_RACC	0xC0
+#define FTPMU010_reserved4	0xC4
+#define FTPMU010_USBD_RACC	0xC8
+#define FTPMU010_IRDARX_RACC	0xCC
+#define FTPMU010_IRDA_RACC	0xD0
+#define FTPMU010_ED0_RACC	0xD4
+#define FTPMU010_ED1_RACC	0xD8
+#endif /* __ASSEMBLY__ */
+
+#endif	/* __FTPMU010_H */
diff --git a/include/faraday/ftsdc010.h b/include/faraday/ftsdc010.h
new file mode 100644
index 0000000..d3a359a
--- /dev/null
+++ b/include/faraday/ftsdc010.h
@@ -0,0 +1,245 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Faraday FTSDC010 Secure Digital Memory Card Host Controller
+ *
+ * Copyright (C) 2011 Andes Technology Corporation
+ * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
+ */
+
+#ifndef __FTSDC010_H
+#define __FTSDC010_H
+
+#ifndef __ASSEMBLY__
+
+/* sd controller register */
+struct ftsdc010_mmc {
+	unsigned int	cmd;		/* 0x00 - command reg		*/
+	unsigned int	argu;		/* 0x04 - argument reg		*/
+	unsigned int	rsp0;		/* 0x08 - response reg0		*/
+	unsigned int	rsp1;		/* 0x0c - response reg1		*/
+	unsigned int	rsp2;		/* 0x10 - response reg2		*/
+	unsigned int	rsp3;		/* 0x14 - response reg3		*/
+	unsigned int	rsp_cmd;	/* 0x18 - responded cmd reg	*/
+	unsigned int	dcr;		/* 0x1c - data control reg	*/
+	unsigned int	dtr;		/* 0x20 - data timer reg	*/
+	unsigned int	dlr;		/* 0x24 - data length reg	*/
+	unsigned int	status;		/* 0x28 - status reg		*/
+	unsigned int	clr;		/* 0x2c - clear reg		*/
+	unsigned int	int_mask;	/* 0x30 - intrrupt mask reg	*/
+	unsigned int	pcr;		/* 0x34 - power control reg	*/
+	unsigned int	ccr;		/* 0x38 - clock contorl reg	*/
+	unsigned int	bwr;		/* 0x3c - bus width reg		*/
+	unsigned int	dwr;		/* 0x40 - data window reg	*/
+#ifndef CONFIG_FTSDC010_SDIO
+	unsigned int	feature;	/* 0x44 - feature reg		*/
+	unsigned int	rev;		/* 0x48 - revision reg		*/
+#else
+	unsigned int	mmc_intr_time;	/* 0x44 - MMC int resp time reg	*/
+	unsigned int	gpo;		/* 0x48 - gerenal purpose output */
+	unsigned int	reserved[8];	/* 0x50 - 0x68 reserved		*/
+	unsigned int	sdio_ctrl1;	/* 0x6c - SDIO control reg 1	*/
+	unsigned int	sdio_ctrl2;	/* 0x70 - SDIO control reg 2	*/
+	unsigned int	sdio_status;	/* 0x74 - SDIO status regi	*/
+	unsigned int	reserved1[9];	/* 0x78 - 0x98	reserved	*/
+	unsigned int	feature;	/* 0x9c - feature reg		*/
+	unsigned int	rev;		/* 0xa0 - revision reg		*/
+#endif /* CONFIG_FTSDC010_SDIO */
+};
+
+struct mmc_host {
+	struct ftsdc010_mmc *reg;
+	unsigned int version;		/* SDHCI spec. version */
+	unsigned int clock;		/* Current clock (MHz) */
+	unsigned int fifo_len;		/* bytes */
+	unsigned int last_opcode;	/* Last OP Code */
+	unsigned int card_type;		/* Card type */
+};
+
+/* functions */
+int ftsdc010_mmc_init(int dev_index);
+
+#endif	/* __ASSEMBLY__ */
+
+/* global defines */
+#define FTSDC010_CMD_RETRY			0x100000
+#define FTSDC010_PIO_RETRY			100	/* pio retry times */
+#define FTSDC010_DELAY_UNIT			100	/* 100 us */
+
+/* define from Linux kernel - include/linux/mmc/card.h */
+#define MMC_TYPE_SDIO				2	/* SDIO card */
+
+/* define for mmc layer */
+#define MMC_DATA_BOTH_DIR			(MMC_DATA_WRITE | MMC_DATA_READ)
+
+/* this part is strange */
+#define FTSDC010_SDIO_CTRL1_REG			0x0000006C
+#define FTSDC010_SDIO_CTRL2_REG			0x0000006C
+#define FTSDC010_SDIO_STATUS_REG		0x00000070
+
+/* 0x00 - command register */
+#define FTSDC010_CMD_IDX(x)			(((x) & 0x3f) << 0)
+#define FTSDC010_CMD_NEED_RSP			(1 << 6)
+#define FTSDC010_CMD_LONG_RSP			(1 << 7)
+#define FTSDC010_CMD_APP_CMD			(1 << 8)
+#define FTSDC010_CMD_CMD_EN			(1 << 9)
+#define FTSDC010_CMD_SDC_RST			(1 << 10)
+#define FTSDC010_CMD_MMC_INT_STOP		(1 << 11)
+
+/* 0x18 - responded command register */
+#define FTSDC010_RSP_CMD_IDX(x)			(((x) >> 0) & 0x3f)
+#define FTSDC010_RSP_CMD_APP			(1 << 6)
+
+/* 0x1c - data control register */
+#define FTSDC010_DCR_BLK_SIZE(x)		(((x) & 0xf) << 0)
+#define FTSDC010_DCR_DATA_WRITE			(1 << 4)
+#define FTSDC010_DCR_DMA_EN			(1 << 5)
+#define FTSDC010_DCR_DATA_EN			(1 << 6)
+#ifdef CONFIG_FTSDC010_SDIO
+#define FTSDC010_DCR_FIFOTH			(1 << 7)
+#define FTSDC010_DCR_DMA_TYPE(x)		(((x) & 0x3) << 8)
+#define FTSDC010_DCR_FIFO_RST			(1 << 10)
+#endif /* CONFIG_FTSDC010_SDIO */
+
+#define FTSDC010_DCR_DMA_TYPE_1			0x0	/* Single r/w	*/
+#define FTSDC010_DCR_DMA_TYPE_4			0x1	/* Burst 4 r/w	*/
+#define FTSDC010_DCR_DMA_TYPE_8			0x2	/* Burst 8 r/w	*/
+
+#define FTSDC010_DCR_BLK_BYTES(x)		(ffs(x) - 1)	/* 1B - 2048B */
+
+/* CPRM related define */
+#define FTSDC010_CPRM_DATA_CHANGE_ENDIAN_EN	0x000008
+#define FTSDC010_CPRM_DATA_SWAP_HL_EN		0x000010
+
+/* 0x28 - status register */
+#define FTSDC010_STATUS_RSP_CRC_FAIL		(1 << 0)
+#define FTSDC010_STATUS_DATA_CRC_FAIL		(1 << 1)
+#define FTSDC010_STATUS_RSP_TIMEOUT		(1 << 2)
+#define FTSDC010_STATUS_DATA_TIMEOUT		(1 << 3)
+#define FTSDC010_STATUS_RSP_CRC_OK		(1 << 4)
+#define FTSDC010_STATUS_DATA_CRC_OK		(1 << 5)
+#define FTSDC010_STATUS_CMD_SEND		(1 << 6)
+#define FTSDC010_STATUS_DATA_END		(1 << 7)
+#define FTSDC010_STATUS_FIFO_URUN		(1 << 8)
+#define FTSDC010_STATUS_FIFO_ORUN		(1 << 9)
+#define FTSDC010_STATUS_CARD_CHANGE		(1 << 10)
+#define FTSDC010_STATUS_CARD_DETECT		(1 << 11)
+#define FTSDC010_STATUS_WRITE_PROT		(1 << 12)
+#ifdef CONFIG_FTSDC010_SDIO
+#define FTSDC010_STATUS_CP_READY		(1 << 13) /* reserved ? */
+#define FTSDC010_STATUS_CP_BUF_READY		(1 << 14) /* reserved ? */
+#define FTSDC010_STATUS_PLAIN_TEXT_READY	(1 << 15) /* reserved ? */
+#define FTSDC010_STATUS_SDIO_IRPT		(1 << 16) /* SDIO card intr */
+#define FTSDC010_STATUS_DATA0_STATUS		(1 << 17)
+#endif /* CONFIG_FTSDC010_SDIO */
+#define FTSDC010_STATUS_RSP_ERROR	\
+	(FTSDC010_STATUS_RSP_CRC_FAIL | FTSDC010_STATUS_RSP_TIMEOUT)
+#define FTSDC010_STATUS_RSP_MASK	\
+	(FTSDC010_STATUS_RSP_ERROR | FTSDC010_STATUS_RSP_CRC_OK)
+#define FTSDC010_STATUS_DATA_ERROR	\
+	(FTSDC010_STATUS_DATA_CRC_FAIL | FTSDC010_STATUS_DATA_TIMEOUT)
+#define FTSDC010_STATUS_DATA_MASK	\
+	(FTSDC010_STATUS_DATA_ERROR | FTSDC010_STATUS_DATA_CRC_OK \
+	| FTSDC010_STATUS_DATA_END)
+
+/* 0x2c - clear register */
+#define FTSDC010_CLR_RSP_CRC_FAIL		(1 << 0)
+#define FTSDC010_CLR_DATA_CRC_FAIL		(1 << 1)
+#define FTSDC010_CLR_RSP_TIMEOUT		(1 << 2)
+#define FTSDC010_CLR_DATA_TIMEOUT		(1 << 3)
+#define FTSDC010_CLR_RSP_CRC_OK			(1 << 4)
+#define FTSDC010_CLR_DATA_CRC_OK		(1 << 5)
+#define FTSDC010_CLR_CMD_SEND			(1 << 6)
+#define FTSDC010_CLR_DATA_END			(1 << 7)
+#define FTSDC010_STATUS_FIFO_URUN		(1 << 8) /* reserved ? */
+#define FTSDC010_STATUS_FIFO_ORUN		(1 << 9) /* reserved ? */
+#define FTSDC010_CLR_CARD_CHANGE		(1 << 10)
+#ifdef CONFIG_FTSDC010_SDIO
+#define FTSDC010_CLR_SDIO_IRPT			(1 << 16)
+#endif /* CONFIG_FTSDC010_SDIO */
+
+/* 0x30 - interrupt mask register */
+#define FTSDC010_INT_MASK_RSP_CRC_FAIL		(1 << 0)
+#define FTSDC010_INT_MASK_DATA_CRC_FAIL		(1 << 1)
+#define FTSDC010_INT_MASK_RSP_TIMEOUT		(1 << 2)
+#define FTSDC010_INT_MASK_DATA_TIMEOUT		(1 << 3)
+#define FTSDC010_INT_MASK_RSP_CRC_OK		(1 << 4)
+#define FTSDC010_INT_MASK_DATA_CRC_OK		(1 << 5)
+#define FTSDC010_INT_MASK_CMD_SEND		(1 << 6)
+#define FTSDC010_INT_MASK_DATA_END		(1 << 7)
+#define FTSDC010_INT_MASK_FIFO_URUN		(1 << 8)
+#define FTSDC010_INT_MASK_FIFO_ORUN		(1 << 9)
+#define FTSDC010_INT_MASK_CARD_CHANGE		(1 << 10)
+#ifdef CONFIG_FTSDC010_SDIO
+#define FTSDC010_INT_MASK_CP_READY		(1 << 13)
+#define FTSDC010_INT_MASK_CP_BUF_READY		(1 << 14)
+#define FTSDC010_INT_MASK_PLAIN_TEXT_READY	(1 << 15)
+#define FTSDC010_INT_MASK_SDIO_IRPT		(1 << 16)
+#define FTSDC010_STATUS_DATA0_STATUS		(1 << 17)
+#endif /* CONFIG_FTSDC010_SDIO */
+
+/* ? */
+#define FTSDC010_CARD_INSERT			0x0
+#define FTSDC010_CARD_REMOVE			FTSDC010_STATUS_REG_CARD_DETECT
+
+/* 0x34 - power control register */
+#define FTSDC010_PCR_POWER(x)			(((x) & 0xf) << 0)
+#define FTSDC010_PCR_POWER_ON			(1 << 4)
+
+/* 0x38 - clock control register */
+#define FTSDC010_CCR_CLK_DIV(x)			(((x) & 0x7f) << 0)
+#define FTSDC010_CCR_CLK_SD			(1 << 7) /* 0: MMC, 1: SD */
+#define FTSDC010_CCR_CLK_DIS			(1 << 8)
+#define FTSDC010_CCR_CLK_HISPD			(1 << 9) /* high speed */
+
+/* card type */
+#define FTSDC010_CARD_TYPE_SD			FTSDC010_CLOCK_REG_CARD_TYPE
+#define FTSDC010_CARD_TYPE_MMC			0x0
+
+/* 0x3c - bus width register */
+#define FTSDC010_BWR_MODE_1BIT      (1 << 0) /* 1 bit mode enabled */
+#define FTSDC010_BWR_MODE_8BIT      (1 << 1) /* 8 bit mode enabled */
+#define FTSDC010_BWR_MODE_4BIT      (1 << 2) /* 4 bit mode enabled */
+#define FTSDC010_BWR_MODE_MASK      (7 << 0)
+#define FTSDC010_BWR_MODE_SHIFT     (0)
+#define FTSDC010_BWR_CAPS_1BIT      (0 << 3) /* 1 bits mode supported */
+#define FTSDC010_BWR_CAPS_4BIT      (1 << 3) /* 1,4 bits mode supported */
+#define FTSDC010_BWR_CAPS_8BIT      (2 << 3) /* 1,4,8 bits mode supported */
+#define FTSDC010_BWR_CAPS_MASK      (3 << 3)
+#define FTSDC010_BWR_CAPS_SHIFT     (3)
+#define FTSDC010_BWR_CARD_DETECT    (1 << 5)
+
+/* 0x44 or 0x9c - feature register */
+#define FTSDC010_FEATURE_FIFO_DEPTH(x)		(((x) >> 0) & 0xff)
+#define FTSDC010_FEATURE_CPRM_FUNCTION		(1 << 8)
+
+#define FTSDC010_FIFO_DEPTH_4			0x04
+#define FTSDC010_FIFO_DEPTH_8			0x08
+#define FTSDC010_FIFO_DEPTH_16			0x10
+
+/* 0x48 or 0xa0 - revision register */
+#define FTSDC010_REV_REVISION(x)		(((x) & 0xff) >> 0)
+#define FTSDC010_REV_MINOR(x)			(((x) & 0xff00) >> 8)
+#define FTSDC010_REV_MAJOR(x)			(((x) & 0xffff0000) >> 16)
+
+#ifdef CONFIG_FTSDC010_SDIO
+/* 0x44 - general purpose output */
+#define FTSDC010_GPO_PORT(x)			(((x) & 0xf) << 0)
+
+/* 0x6c - sdio control register 1 */
+#define FTSDC010_SDIO_CTRL1_SDIO_BLK_SIZE(x)	(((x) & 0xfff) << 0)
+#define FTSDC010_SDIO_CTRL1_SDIO_BLK_MODE	(1 << 12)
+#define FTSDC010_SDIO_CTRL1_READ_WAIT_EN	(1 << 13)
+#define FTSDC010_SDIO_CTRL1_SDIO_ENABLE		(1 << 14)
+#define FTSDC010_SDIO_CTRL1_SDIO_BLK_NO(x)	(((x) & 0x1ff) << 15)
+
+/* 0x70 - sdio control register 2 */
+#define FTSDC010_SDIO_CTRL2_SUSP_READ_WAIT	(1 << 0)
+#define FTSDC010_SDIO_CTRL2_SUSP_CMD_ABORT	(1 << 1)
+
+/* 0x74 - sdio status register */
+#define FTSDC010_SDIO_STATUS_SDIO_BLK_CNT(x)	(((x) >> 0) & 0x1ffff)
+#define FTSDC010_SDIO_STATUS_FIFO_REMAIN_NO(x)	(((x) >> 17) & 0xef)
+
+#endif /* CONFIG_FTSDC010_SDIO */
+
+#endif /* __FTSDC010_H */
diff --git a/include/faraday/ftsdmc020.h b/include/faraday/ftsdmc020.h
new file mode 100644
index 0000000..d74da16
--- /dev/null
+++ b/include/faraday/ftsdmc020.h
@@ -0,0 +1,90 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2009 Faraday Technology
+ * Po-Yu Chuang <ratbert@faraday-tech.com>
+ */
+
+/*
+ * SDRAM Controller
+ */
+#ifndef __FTSDMC020_H
+#define __FTSDMC020_H
+
+#define FTSDMC020_OFFSET_TP0		0x00
+#define FTSDMC020_OFFSET_TP1		0x04
+#define FTSDMC020_OFFSET_CR		0x08
+#define FTSDMC020_OFFSET_BANK0_BSR	0x0C
+#define FTSDMC020_OFFSET_BANK1_BSR	0x10
+#define FTSDMC020_OFFSET_BANK2_BSR	0x14
+#define FTSDMC020_OFFSET_BANK3_BSR	0x18
+#define FTSDMC020_OFFSET_BANK4_BSR	0x1C
+#define FTSDMC020_OFFSET_BANK5_BSR	0x20
+#define FTSDMC020_OFFSET_BANK6_BSR	0x24
+#define FTSDMC020_OFFSET_BANK7_BSR	0x28
+#define FTSDMC020_OFFSET_ACR		0x34
+
+/*
+ * Timing Parametet 0 Register
+ */
+#define FTSDMC020_TP0_TCL(x)	((x) & 0x3)
+#define FTSDMC020_TP0_TWR(x)	(((x) & 0x3) << 4)
+#define FTSDMC020_TP0_TRF(x)	(((x) & 0xf) << 8)
+#define FTSDMC020_TP0_TRCD(x)	(((x) & 0x7) << 12)
+#define FTSDMC020_TP0_TRP(x)	(((x) & 0xf) << 16)
+#define FTSDMC020_TP0_TRAS(x)	(((x) & 0xf) << 20)
+
+/*
+ * Timing Parametet 1 Register
+ */
+#define FTSDMC020_TP1_REF_INTV(x)	((x) & 0xffff)
+#define FTSDMC020_TP1_INI_REFT(x)	(((x) & 0xf) << 16)
+#define FTSDMC020_TP1_INI_PREC(x)	(((x) & 0xf) << 20)
+
+/*
+ * Configuration Register
+ */
+#define FTSDMC020_CR_SREF	(1 << 0)
+#define FTSDMC020_CR_PWDN	(1 << 1)
+#define FTSDMC020_CR_ISMR	(1 << 2)
+#define FTSDMC020_CR_IREF	(1 << 3)
+#define FTSDMC020_CR_IPREC	(1 << 4)
+#define FTSDMC020_CR_REFTYPE	(1 << 5)
+
+/*
+ * SDRAM External Bank Base/Size Register
+ */
+#define FTSDMC020_BANK_ENABLE		(1 << 28)
+
+#define FTSDMC020_BANK_BASE(addr)	(((addr) >> 20) << 16)
+
+#define FTSDMC020_BANK_DDW_X4		(0 << 12)
+#define FTSDMC020_BANK_DDW_X8		(1 << 12)
+#define FTSDMC020_BANK_DDW_X16		(2 << 12)
+#define FTSDMC020_BANK_DDW_X32		(3 << 12)
+
+#define FTSDMC020_BANK_DSZ_16M		(0 << 8)
+#define FTSDMC020_BANK_DSZ_64M		(1 << 8)
+#define FTSDMC020_BANK_DSZ_128M		(2 << 8)
+#define FTSDMC020_BANK_DSZ_256M		(3 << 8)
+
+#define FTSDMC020_BANK_MBW_8		(0 << 4)
+#define FTSDMC020_BANK_MBW_16		(1 << 4)
+#define FTSDMC020_BANK_MBW_32		(2 << 4)
+
+#define FTSDMC020_BANK_SIZE_1M		0x0
+#define FTSDMC020_BANK_SIZE_2M		0x1
+#define FTSDMC020_BANK_SIZE_4M		0x2
+#define FTSDMC020_BANK_SIZE_8M		0x3
+#define FTSDMC020_BANK_SIZE_16M		0x4
+#define FTSDMC020_BANK_SIZE_32M		0x5
+#define FTSDMC020_BANK_SIZE_64M		0x6
+#define FTSDMC020_BANK_SIZE_128M	0x7
+#define FTSDMC020_BANK_SIZE_256M	0x8
+
+/*
+ * Arbiter Control Register
+ */
+#define FTSDMC020_ACR_TOC(x)	((x) & 0x1f)
+#define FTSDMC020_ACR_TOE	(1 << 8)
+
+#endif	/* __FTSDMC020_H */
diff --git a/include/faraday/ftsdmc021.h b/include/faraday/ftsdmc021.h
new file mode 100644
index 0000000..3c979ce
--- /dev/null
+++ b/include/faraday/ftsdmc021.h
@@ -0,0 +1,138 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2009 Faraday Technology
+ * Po-Yu Chuang <ratbert@faraday-tech.com>
+ *
+ * (C) Copyright 2011 Andes Technology Corp
+ * Macpaul Lin <macpaul@andestech.com>
+ */
+
+/*
+ * FTSDMC021 - SDRAM Controller
+ */
+#ifndef __FTSDMC021_H
+#define __FTSDMC021_H
+
+#ifndef __ASSEMBLY__
+struct ftsdmc021 {
+	unsigned int	tp1;		/* 0x00 - SDRAM Timing Parameter 1 */
+	unsigned int	tp2;		/* 0x04 - SDRAM Timing Parameter 2 */
+	unsigned int	cr1;		/* 0x08 - SDRAM Configuration Reg 1 */
+	unsigned int	cr2;		/* 0x0c - SDRAM Configuration Reg 2 */
+	unsigned int	bank0_bsr;	/* 0x10 - Ext. Bank Base/Size Reg 0 */
+	unsigned int	bank1_bsr;	/* 0x14 - Ext. Bank Base/Size Reg 1 */
+	unsigned int	bank2_bsr;	/* 0x18 - Ext. Bank Base/Size Reg 2 */
+	unsigned int	bank3_bsr;	/* 0x1c - Ext. Bank Base/Size Reg 3 */
+	unsigned int	bank4_bsr;	/* 0x20 - Ext. Bank Base/Size Reg 4 */
+	unsigned int	bank5_bsr;	/* 0x24 - Ext. Bank Base/Size Reg 5 */
+	unsigned int	bank6_bsr;	/* 0x28 - Ext. Bank Base/Size Reg 6 */
+	unsigned int	bank7_bsr;	/* 0x2c - Ext. Bank Base/Size Reg 7 */
+	unsigned int	ragr;		/* 0x30 - Read Arbitration Group Reg */
+	unsigned int	frr;		/* 0x34 - Flush Request Register */
+	unsigned int	ebisr;		/* 0x38 - EBI Support Register	*/
+	unsigned int	rsved[25];	/* 0x3c-0x9c - Reserved		*/
+	unsigned int	crr;		/* 0x100 - Controller Revision Reg */
+	unsigned int	cfr;		/* 0x104 - Controller Feature Reg */
+};
+#endif /* __ASSEMBLY__ */
+
+/*
+ * Timing Parameter 1 Register
+ */
+#define FTSDMC021_TP1_TCL(x)	((x) & 0x3)		/* CAS Latency */
+#define FTSDMC021_TP1_TWR(x)	(((x) & 0x3) << 4)	/* W-Recovery Time */
+#define FTSDMC021_TP1_TRF(x)	(((x) & 0xf) << 8)	/* Auto-Refresh Cycle */
+#define FTSDMC021_TP1_TRCD(x)	(((x) & 0x7) << 12)	/* RAS-to-CAS Delay */
+#define FTSDMC021_TP1_TRP(x)	(((x) & 0xf) << 16)	/* Precharge Cycle */
+#define FTSDMC021_TP1_TRAS(x)	(((x) & 0xf) << 20)
+
+/*
+ * Timing Parameter 2 Register
+ */
+#define FTSDMC021_TP2_REF_INTV(x)	((x) & 0xffff)	/* Refresh interval */
+/* b(16:19) - Initial Refresh Times */
+#define FTSDMC021_TP2_INI_REFT(x)	(((x) & 0xf) << 16)
+/* b(20:23) - Initial Pre-Charge Times */
+#define FTSDMC021_TP2_INI_PREC(x)	(((x) & 0xf) << 20)
+
+/*
+ * SDRAM Configuration Register 1
+ */
+#define FTSDMC021_CR1_BNKSIZE(x)	((x) & 0xf)		/* Bank Size  */
+#define FTSDMC021_CR1_MBW(x)		(((x) & 0x3) << 4)	/* Bus Width  */
+#define FTSDMC021_CR1_DSZ(x)		(((x) & 0x7) << 8)	/* SDRAM Size */
+#define FTSDMC021_CR1_DDW(x)		(((x) & 0x3) << 12)	/* Data Width */
+/* b(16) MA2T: Double Memory Address Cycle Enable */
+#define FTSDMC021_CR1_MA2T(x)		(1 << 16)
+/* The value of b(0:3)CR1: 1M-512M, must be power of 2 */
+#define FTSDMC021_BANK_SIZE(x)		(ffs(x) - 1)
+
+/*
+ * Configuration Register 2
+ */
+#define FTSDMC021_CR2_SREF	(1 << 0)	/* Self-Refresh Mode */
+#define FTSDMC021_CR2_PWDN	(1 << 1)	/* Power Down Operation Mode */
+#define FTSDMC021_CR2_ISMR	(1 << 2)	/* Start Set-Mode-Register */
+#define FTSDMC021_CR2_IREF	(1 << 3)	/* Init Refresh Start Flag */
+#define FTSDMC021_CR2_IPREC	(1 << 4)	/* Init Pre-Charge Start Flag */
+#define FTSDMC021_CR2_REFTYPE	(1 << 5)
+
+/*
+ * SDRAM External Bank Base/Size Register
+ */
+#define FTSDMC021_BANK_ENABLE		(1 << 12)
+
+/* 12-bit base address of external bank.
+ * Default value is 0x800.
+ * The 12-bit equals to the haddr[31:20] of AHB address bus. */
+#define FTSDMC021_BANK_BASE(x)		((x) & 0xfff)
+
+/*
+ * Read Arbitration Grant Window Register
+ */
+#define FTSDMC021_RAGR_CH1GW(x)		(((x) & 0xff) << 0)
+#define FTSDMC021_RAGR_CH2GW(x)		(((x) & 0xff) << 4)
+#define FTSDMC021_RAGR_CH3GW(x)		(((x) & 0xff) << 8)
+#define FTSDMC021_RAGR_CH4GW(x)		(((x) & 0xff) << 12)
+#define FTSDMC021_RAGR_CH5GW(x)		(((x) & 0xff) << 16)
+#define FTSDMC021_RAGR_CH6GW(x)		(((x) & 0xff) << 20)
+#define FTSDMC021_RAGR_CH7GW(x)		(((x) & 0xff) << 24)
+#define FTSDMC021_RAGR_CH8GW(x)		(((x) & 0xff) << 28)
+
+/*
+ * Flush Request Register
+ */
+#define FTSDMC021_FRR_FLUSHCHN(x)	(((x) & 0x7) << 0)
+#define FTSDMC021_FRR_FLUSHCMPLT	(1 << 3)	/* Flush Req Flag */
+
+/*
+ * External Bus Interface Support Register (EBISR)
+ */
+#define FTSDMC021_EBISR_MR(x)		((x) & 0xfff)	/* Far-end mode	*/
+#define FTSDMC021_EBISR_PRSMR		(1 << 12)	/* Pre-SMR	*/
+#define FTSDMC021_EBISR_POPREC		(1 << 13)
+#define FTSDMC021_EBISR_POSMR		(1 << 14)	/* Post-SMR	*/
+
+/*
+ * Controller Revision Register (CRR, Read Only)
+ */
+#define FTSDMC021_CRR_REV_VER		(((x) >> 0) & 0xff)
+#define FTSDMC021_CRR_MINOR_VER		(((x) >> 8) & 0xff)
+#define FTSDMC021_CRR_MAJOR_VER		(((x) >> 16) & 0xff)
+
+/*
+ * Controller Feature Register (CFR, Read Only)
+ */
+#define FTSDMC021_CFR_EBNK		(((x) >> 0) & 0xf)
+#define FTSDMC021_CFR_CHN		(((x) >> 8) & 0xf)
+#define FTSDMC021_CFR_EBI		(((x) >> 16) & 0x1)
+#define FTSDMC021_CFR_CH1_FDEPTH	(((x) >> 24) & 0x1)
+#define FTSDMC021_CFR_CH2_FDEPTH	(((x) >> 25) & 0x1)
+#define FTSDMC021_CFR_CH3_FDEPTH	(((x) >> 26) & 0x1)
+#define FTSDMC021_CFR_CH4_FDEPTH	(((x) >> 27) & 0x1)
+#define FTSDMC021_CFR_CH5_FDEPTH	(((x) >> 28) & 0x1)
+#define FTSDMC021_CFR_CH6_FDEPTH	(((x) >> 29) & 0x1)
+#define FTSDMC021_CFR_CH7_FDEPTH	(((x) >> 30) & 0x1)
+#define FTSDMC021_CFR_CH8_FDEPTH	(((x) >> 31) & 0x1)
+
+#endif	/* __FTSDMC021_H */
diff --git a/include/faraday/ftsmc020.h b/include/faraday/ftsmc020.h
new file mode 100644
index 0000000..f902a79
--- /dev/null
+++ b/include/faraday/ftsmc020.h
@@ -0,0 +1,73 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2009 Faraday Technology
+ * Po-Yu Chuang <ratbert@faraday-tech.com>
+ */
+
+/*
+ * Static Memory Controller
+ */
+#ifndef __FTSMC020_H
+#define __FTSMC020_H
+
+#ifndef __ASSEMBLY__
+
+struct ftsmc020_bank {
+	unsigned int    cr;
+	unsigned int    tpr;
+};
+
+struct ftsmc020 {
+	struct ftsmc020_bank bank[4];	/* 0x00 - 0x1c */
+	unsigned int	pad[8];		/* 0x20 - 0x3c */
+	unsigned int	ssr;		/* 0x40 */
+};
+
+void ftsmc020_init(void);
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * Memory Bank Configuration Register
+ */
+#define FTSMC020_BANK_ENABLE	(1 << 28)
+#define FTSMC020_BANK_BASE(x)	((x) & 0x0fff1000)
+
+#define FTSMC020_BANK_WPROT	(1 << 11)
+
+#define FTSMC020_BANK_TYPE1	(1 << 10)
+#define FTSMC020_BANK_TYPE2	(1 << 9)
+#define FTSMC020_BANK_TYPE3	(1 << 8)
+
+#define FTSMC020_BANK_SIZE_32K	(0xb << 4)
+#define FTSMC020_BANK_SIZE_64K	(0xc << 4)
+#define FTSMC020_BANK_SIZE_128K	(0xd << 4)
+#define FTSMC020_BANK_SIZE_256K	(0xe << 4)
+#define FTSMC020_BANK_SIZE_512K	(0xf << 4)
+#define FTSMC020_BANK_SIZE_1M	(0x0 << 4)
+#define FTSMC020_BANK_SIZE_2M	(0x1 << 4)
+#define FTSMC020_BANK_SIZE_4M	(0x2 << 4)
+#define FTSMC020_BANK_SIZE_8M	(0x3 << 4)
+#define FTSMC020_BANK_SIZE_16M	(0x4 << 4)
+#define FTSMC020_BANK_SIZE_32M	(0x5 << 4)
+#define FTSMC020_BANK_SIZE_64M	(0x6 << 4)
+
+#define FTSMC020_BANK_MBW_8	(0x0 << 0)
+#define FTSMC020_BANK_MBW_16	(0x1 << 0)
+#define FTSMC020_BANK_MBW_32	(0x2 << 0)
+
+/*
+ * Memory Bank Timing Parameter Register
+ */
+#define FTSMC020_TPR_ETRNA(x)	(((x) & 0xf) << 28)
+#define FTSMC020_TPR_EATI(x)	(((x) & 0xf) << 24)
+#define FTSMC020_TPR_RBE	(1 << 20)
+#define FTSMC020_TPR_AST(x)	(((x) & 0x3) << 18)
+#define FTSMC020_TPR_CTW(x)	(((x) & 0x3) << 16)
+#define FTSMC020_TPR_ATI(x)	(((x) & 0xf) << 12)
+#define FTSMC020_TPR_AT2(x)	(((x) & 0x3) << 8)
+#define FTSMC020_TPR_WTC(x)	(((x) & 0x3) << 6)
+#define FTSMC020_TPR_AHT(x)	(((x) & 0x3) << 4)
+#define FTSMC020_TPR_TRNA(x)	(((x) & 0xf) << 0)
+
+#endif	/* __FTSMC020_H */
diff --git a/include/faraday/fttmr010.h b/include/faraday/fttmr010.h
new file mode 100644
index 0000000..ec1c989
--- /dev/null
+++ b/include/faraday/fttmr010.h
@@ -0,0 +1,60 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2009 Faraday Technology
+ * Po-Yu Chuang <ratbert@faraday-tech.com>
+ */
+
+/*
+ * Timer
+ */
+#ifndef __FTTMR010_H
+#define __FTTMR010_H
+
+struct fttmr010 {
+	unsigned int	timer1_counter;		/* 0x00 */
+	unsigned int	timer1_load;		/* 0x04 */
+	unsigned int	timer1_match1;		/* 0x08 */
+	unsigned int	timer1_match2;		/* 0x0c */
+	unsigned int	timer2_counter;		/* 0x10 */
+	unsigned int	timer2_load;		/* 0x14 */
+	unsigned int	timer2_match1;		/* 0x18 */
+	unsigned int	timer2_match2;		/* 0x1c */
+	unsigned int	timer3_counter;		/* 0x20 */
+	unsigned int	timer3_load;		/* 0x24 */
+	unsigned int	timer3_match1;		/* 0x28 */
+	unsigned int	timer3_match2;		/* 0x2c */
+	unsigned int	cr;			/* 0x30 */
+	unsigned int	interrupt_state;	/* 0x34 */
+	unsigned int	interrupt_mask;		/* 0x38 */
+};
+
+/*
+ * Timer Control Register
+ */
+#define FTTMR010_TM3_UPDOWN	(1 << 11)
+#define FTTMR010_TM2_UPDOWN	(1 << 10)
+#define FTTMR010_TM1_UPDOWN	(1 << 9)
+#define FTTMR010_TM3_OFENABLE	(1 << 8)
+#define FTTMR010_TM3_CLOCK	(1 << 7)
+#define FTTMR010_TM3_ENABLE	(1 << 6)
+#define FTTMR010_TM2_OFENABLE	(1 << 5)
+#define FTTMR010_TM2_CLOCK	(1 << 4)
+#define FTTMR010_TM2_ENABLE	(1 << 3)
+#define FTTMR010_TM1_OFENABLE	(1 << 2)
+#define FTTMR010_TM1_CLOCK	(1 << 1)
+#define FTTMR010_TM1_ENABLE	(1 << 0)
+
+/*
+ * Timer Interrupt State & Mask Registers
+ */
+#define FTTMR010_TM3_OVERFLOW	(1 << 8)
+#define FTTMR010_TM3_MATCH2	(1 << 7)
+#define FTTMR010_TM3_MATCH1	(1 << 6)
+#define FTTMR010_TM2_OVERFLOW	(1 << 5)
+#define FTTMR010_TM2_MATCH2	(1 << 4)
+#define FTTMR010_TM2_MATCH1	(1 << 3)
+#define FTTMR010_TM1_OVERFLOW	(1 << 2)
+#define FTTMR010_TM1_MATCH2	(1 << 1)
+#define FTTMR010_TM1_MATCH1	(1 << 0)
+
+#endif	/* __FTTMR010_H */
diff --git a/include/faraday/ftwdt010_wdt.h b/include/faraday/ftwdt010_wdt.h
new file mode 100644
index 0000000..20bf6d3
--- /dev/null
+++ b/include/faraday/ftwdt010_wdt.h
@@ -0,0 +1,93 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Watchdog driver for the FTWDT010 Watch Dog Driver
+ *
+ * (c) Copyright 2004 Faraday Technology Corp. (www.faraday-tech.com)
+ * Based on sa1100_wdt.c by Oleg Drokin <green@crimea.edu>
+ * Based on SoftDog driver by Alan Cox <alan@redhat.com>
+ *
+ * Copyright (C) 2011 Andes Technology Corporation
+ * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
+ *
+ * 27/11/2004 Initial release, Faraday.
+ * 12/01/2011 Port to u-boot, Macpaul Lin.
+ */
+
+#ifndef __FTWDT010_H
+#define __FTWDT010_H
+
+struct ftwdt010_wdt {
+	unsigned int	wdcounter;	/* Counter Reg		- 0x00 */
+	unsigned int	wdload;		/* Counter Auto Reload Reg - 0x04 */
+	unsigned int	wdrestart;	/* Counter Restart Reg	- 0x08 */
+	unsigned int	wdcr;		/* Control Reg		- 0x0c */
+	unsigned int	wdstatus;	/* Status Reg		- 0x10 */
+	unsigned int	wdclear;	/* Timer Clear		- 0x14 */
+	unsigned int	wdintrlen;	/* Interrupt Length	- 0x18 */
+};
+
+/*
+ * WDLOAD - Counter Auto Reload Register
+ *   The Auto Reload Register is set to 0x03EF1480 (66Mhz) by default.
+ *   Which means in a 66MHz system, the period of Watch Dog timer reset is
+ *   one second.
+ */
+#define FTWDT010_WDLOAD(x)		((x) & 0xffffffff)
+
+/*
+ * WDRESTART - Watch Dog Timer Counter Restart Register
+ *   If writing 0x5AB9 to WDRESTART register, Watch Dog timer will
+ *   automatically reload WDLOAD to WDCOUNTER and restart counting.
+ */
+#define FTWDT010_WDRESTART_MAGIC	0x5AB9
+
+/* WDCR - Watch Dog Timer Control Register */
+#define FTWDT010_WDCR_ENABLE		(1 << 0)
+#define FTWDT010_WDCR_RST		(1 << 1)
+#define FTWDT010_WDCR_INTR		(1 << 2)
+/* FTWDT010_WDCR_EXT bit: Watch Dog Timer External Signal Enable */
+#define FTWDT010_WDCR_EXT		(1 << 3)
+/* FTWDT010_WDCR_CLOCK bit: Clock Source: 0: PCLK, 1: EXTCLK.
+ *  The clock source PCLK cannot be gated when system sleeps, even if
+ *  WDCLOCK bit is turned on.
+ *
+ *  Faraday's Watch Dog timer can be driven by an external clock. The
+ *  programmer just needs to write one to WdCR[WdClock] bit.
+ *
+ *  Note: There is a limitation between EXTCLK and PCLK:
+ *  EXTCLK cycle time / PCLK cycle time > 2.
+ *  If the system does not need an external clock,
+ *  just keep WdCR[WdClock] bit in its default value.
+ */
+#define FTWDT010_WDCR_CLOCK		(1 << 4)
+
+/*
+ * WDSTATUS - Watch Dog Timer Status Register
+ *   This bit is set when the counter reaches Zero
+ */
+#define FTWDT010_WDSTATUS(x)		((x) & 0x1)
+
+/*
+ * WDCLEAR - Watch Dog Timer Clear Register
+ *   Writing one to this register will clear WDSTATUS.
+ */
+#define FTWDT010_WDCLEAR		(1 << 0)
+
+/*
+ * WDINTRLEN - Watch Dog Timer Interrupt Length
+ *   This register controls the duration length of wd_rst, wd_intr and wd_ext.
+ *   The default value is 0xFF.
+ */
+#define FTWDT010_WDINTRLEN(x)		((x) & 0xff)
+
+/*
+ * Variable timeout should be set in ms.
+ * (CONFIG_SYS_CLK_FREQ/1000) equals 1 ms.
+ * WDLOAD = timeout * TIMEOUT_FACTOR.
+ */
+#define FTWDT010_TIMEOUT_FACTOR		(CONFIG_SYS_CLK_FREQ / 1000) /* 1 ms */
+
+void ftwdt010_wdt_reset(void);
+void ftwdt010_wdt_disable(void);
+
+#endif /* __FTWDT010_H */